Yarisworld Archive

►►►DC Sports Headers - 1NZ Yaris 2008 HB

17 posts · 17,929 views

man83Original postGT (502) · Mar 26, 2016#1
Well... Here is one of the classic modifications. The sound changes a bit. The real difference is felt above the 4K revs.

I had no problems with the installation, it fits perfectly..

17 attachments not included in this copy

Replies 16

brushforhireJohnstown, PA · Mar 26, 2016#2
Very cool. Looks great!
tmontagueCaledonia Ont. · Mar 27, 2016#3
Enjoy the new header. It's a great product that improves the torque curve quite a bit. I was impressed when I installed mine.

Now just fork out the cash for a Golden Eagle intake manifold and pair it with a short or cold air intake and you'll love your Yaris even more
man83Thread starterGT (502) · Mar 28, 2016#4
Originally Posted by brushforhire ↑
Very cool. Looks great!
Thank you. 👍
Originally Posted by tmontague ↑
Enjoy the new header. It's a great product that improves the torque curve quite a bit. I was impressed when I installed mine.

Now just fork out the cash for a Golden Eagle intake manifold and pair it with a short or cold air intake and you'll love your Yaris even more
Believe me that I am enjoying it. Now I have a CAI with AEM filter. I have also installed a Magnaflow exhaust too.
I had seen the GE IM, and definitely this will be my next performance upgrade.
sang pengembarajeddah - saudia arabia · Apr 23, 2016#5
Originally Posted by man83 ↑
Thank you. 👍

Believe me that I am enjoying it. Now I have a CAI with AEM filter. I have also installed a Magnaflow exhaust too.
I had seen the GE IM, and definitely this will be my next performance upgrade.
What is this sensor???.. I do not see installed at new header. Are you remove it? Picture not included in this copy

Sent from my C6903 using Tapatalk
tmontagueCaledonia Ont. · Apr 23, 2016#6
O2 sensor. There is a bung on the DC header for it. It may not have been installed in the above image but you can see the bung for it in the comparison image of the oem header and the DC one
marion2Manila, PH · May 13, 2016#7
Where can I purchase DC header for my Yaris Sedan and I am from South East Asia?
rabbitoThailand · May 15, 2016#8
its a 02 sensor...i had to put a hole in mine since mine was old vitz(jdm version) aftermarket header...
you should carefully remove from your old header and place them on to your new header

Sent from my ASUS_Z00AD using Tapatalk
man83Thread starterGT (502) · May 19, 2016#9
Originally Posted by sang pengembara ↑
What is this sensor???.. I do not see installed at new header. Are you remove it? Picture not included in this copy

Sent from my C6903 using Tapatalk

Well, that is all said O2 sensor. The shape of the tube leaving not see the sensor.
I'll take a picture so you can see how it looks.
Anchors15Austin, tx · May 23, 2016#10
Nicely done! Does anyone know if these will fit a '15 three door?
man83Thread starterGT (502) · Dec 7, 2016#11
Here is the pending picture. There you can see the sensor.

1 attachment not included in this copy

JessMessWaldorf Maryland · Feb 4, 2017#12
other than the header is everything else stock exhaust??
malibuguyWestminster, MD · Feb 4, 2017#13
Yikes you removed the cowl to install it?

When I installed my WeaponR header I did not need to
williew2Australia · Feb 6, 2017#14
Originally Posted by malibuguy ↑
Yikes you removed the cowl to install it?

When I installed my WeaponR header I did not need to
would improve access though...

Thanks for the photos, very useful as I'm looking at doing the same but with 4-2-1 header :)
man83Thread starterGT (502) · Feb 21, 2017#15
Originally Posted by JessMess ↑
other than the header is everything else stock exhaust??
Hello Jess, I also change the entire pipe, here is the thread: ►►►Custom 2" Catback - What next? Please help

Originally Posted by malibuguy ↑
Yikes you removed the cowl to install it?

When I installed my WeaponR header I did not need to
Yes, it's more comfortable to work.

Originally Posted by williew2 ↑
would improve access though...

Thanks for the photos, very useful as I'm looking at doing the same but with 4-2-1 header :)
Share it when you do it 🎉
williew2Australia · Feb 22, 2017#16
did you have any issues with heat on surrounding parts given the headers don't have a heat shield? I'm wondering if I need to wrap the headers or try and modify the heat shield to fit.
tmontagueCaledonia Ont. · Feb 23, 2017#17
do not wrap the headers, they are ceramic coated and are not meant to be wrapped.

I never had any issues with no heat shield when I ran the DC header and in most cars I've owned I cut the heat shield off when it rusts out and rattles. I removed the heat shield on my 2zr before I did the swap since it was close to rusting in a year or two.

Most heat shields are to stop things like leaves which get trapped in the engine bay from landing on the header and starting a fire. You'll be fine without it, no worries