Yarisworld Archive

transmission wont go into OD

4 posts · 4,785 views

Tim MillerOriginal postCanada · Dec 14, 2015#1
Hello

I have a 2008 yaris that wont go into OD. I am getting a p0717 code.
Input/turbine speed sensor no signal. I understand that it wont shift into OD until the car is warmed up. that doesnt seem to be the issue.

I have 2 wires that do not seem to be connected to anything any ideas what they are??

I was also wondering if anyone could tell me where the coolant sensor is

in the pictures I was curious what those wires are for and what they are supposed to connect too

also is there a place I could down load a wiring diagram of the car


thanks
yaris-1.pngyaris-2.png

Replies 3

CTScottUSA, CT · Dec 14, 2015#2
The violet/blue wires on the connector on the left are supposed to be plugged into the VSV Purge valve which is a grey block with hoses coming out of it that should be mounted to that L shaped metal bracket on the left.

The turbine sensor on the tranny is the black one with the 2 pin connector plugged into it just behind where the tranny dipstick enters.
Tim MillerThread starterCanada · Dec 14, 2015#3
thank you!!!

any other insights you might have? Im trying to avoid taking it to a toyota dealer which is 3 hours away
CTScottUSA, CT · Dec 15, 2015#4
Originally Posted by Tim Miller ↑
thank you!!!

any other insights you might have? Im trying to avoid taking it to a toyota dealer which is 3 hours away
The sensor is likely the issue, as the code points to it and it would indeed prevent the tranny from going into OD.