Yarisworld Archive

VITZ emblem

13 posts · 4,071 views

kimonaOriginal postHuntington Bch, CA · Nov 30, 2015#1
Installed Vitz emblem and stainless steel exhaust tip today.

1 attachment not included in this copy

Replies 12

ern-dizCA all day · Nov 30, 2015#2
👍
KalispelArizona (USA) · Nov 30, 2015#3
👍

Cars without exhaust tips make me want to weep. 😢
tmontagueCaledonia Ont. · Dec 1, 2015#4
Looks good. I just ordered a Vitz emblem as well to replace the Yaris one I have. I also got a TRD for the front grill and a VVT-i to replace the rear "Toyota" one. They won't be shipped for a while but I'll post pics when it's all done
ern-dizCA all day · Dec 1, 2015#5
What's the process? Fishing line to remove old emblem and some goo gone to get rid of the stickiness before installing the new emblem?
tmontagueCaledonia Ont. · Dec 1, 2015#6
I was going to use a heat gun on the emblems and then use dental floss to remove them. If there as still adhesive stuck on the car than I was going to use goo gone to remove it.
kimonaThread starterHuntington Bch, CA · Dec 1, 2015#7
Here's how I did it:

Use dental floss to remove the original emblems. Then, heat the remaining 2-sided tape with a hair dryer and gently peel it off bit by bit with your fingernails. Clean the surface with a soft cotton cloth and a little goo gone. Finish by applying wax to the area.

To install new emblems, use blue painters tape to mark the location. Then, clean the area with an alcohol wipe. Let it dry completely. Peel the paper from the 2-sided tape and very carefully stick on your new emblem. Apply a little heat to the emblem and hold it firmly in place for a minute. Don't wash your car for a few days.
ern-dizCA all day · Dec 1, 2015#8
Interesting. Thanks for the info.
Kar98DFW · Dec 2, 2015#9
Originally Posted by ern-diz ↑
What's the process? Fishing line to remove old emblem and some goo gone to get rid of the stickiness before installing the new emblem?
I happened to buy my car in the summer and taking the rear emblem off was no harder than separating a peanut butter sandwich. Just pulled it off.
ern-dizCA all day · Dec 2, 2015#10
Originally Posted by Kar98 ↑
I happened to buy my car in the summer and taking the rear emblem off was no harder than separating a peanut butter sandwich. Just pulled it off.
Gets pretty warm in the Dallas Fort Worth area, eh? The company I work for is headquartered in Dallas, so I've made a few trips there.

I've toyed with the idea of removing emblems except for the bit 'yota ones; and plasti-dipping those black. Going full blackout. I worry I won't like it, so I haven't gone through with it.
enviriCT · Dec 2, 2015#11
what! no vitz(heart)! lol
Kar98DFW · Dec 2, 2015#12
Originally Posted by ern-diz ↑
Gets pretty warm in the Dallas Fort Worth area, eh? The company I work for is headquartered in Dallas, so I've made a few trips there.
That's how I wound up in a Yaris in first place. A/C in my '97 VW Golf died in the middle of summer, what with everything else that was already falling apart on it, I figured it's not worth fixing... hey guy, whatcha got in 5 speed manual, hatchback with a working A/C? Fine, pack it up, I guess.

I've toyed with the idea of removing emblems except for the bit 'yota ones; and plasti-dipping those black. Going full blackout. I worry I won't like it, so I haven't gone through with it.
Where I've seen plastidip blacked out emblems, they look cheesy.
SirDigbyDenver, Colorado · Dec 3, 2015#13
yeah, plastidip sucks. if you want them black you should use good quality paint