Yarisworld Archive

Researching Yaris S front spoiler for my 2009

14 posts · 13,694 views

firebird1999usOriginal postGeorgia · Nov 10, 2015#1
I've been after one of these for a while! And now that I'm going to do a cosmetic rebuild/repaint on the front end of my 2009 2dr hatch at 240k miles I think I'm going to finally pull the trigger!

I'm essentially going to clone the car of a member here named The Barber... although with a 2009 as I believe his is an older model year.

spotted: me
yaris RE-build

From my research I've found that the part number is for just the front splitter is PZ321-52032 and I've spoken to several places that are able to order it for a reasonable price. However there are two issues I've run into:

1- Is there anyone who has ordered the Yaris S front splitter that can tell me if it includes the plastic, angled fog lamp bezels, the plastic grill insert, or any sort of gasket used to mount it? If not does anyone know the part numbers for those?

*I'm aware the stock bumper will have to have holes cut in it for mounting. That's fine as I'm actually buying an entirely new front bumper anyway.

2- Will I need a VIN Number from a Yaris S to officially order the part? The only place I spoke with over the phone said they could try to order it and see if it would take in the computer without a Yaris S VIN. However I didn't want to order until I have some sort of answer to the first question...

The lower front spoiler/splitter is what I'm talking about:

Picture not included in this copy

Picture not included in this copy

Replies 13

tadakunOregon · Nov 12, 2015#2
what kind of price were you getting quoted?
90tsimissouri · Nov 12, 2015#3
I had my buddy parts guy at toyota tell me he does not need vin to order that part. He told me list price was like 450ish.
firebird1999usThread starterGeorgia · Nov 14, 2015#4
Originally Posted by tadakun ↑
what kind of price were you getting quoted?
About $343 shipped... it was only like $20 for shipping.

Originally Posted by 90tsi ↑
I had my buddy parts guy at toyota tell me he does not need vin to order that part. He told me list price was like 450ish.
Good... yeah it appears I can just add it to my cart so it doesn't seem like a VIN is even relevant. The problem is I have no information on the part being delivered other than that's the number and it's coming from a warehouse somewhere in California?
thebarberGrand Rapids, MI · Nov 16, 2015#5
The whole bumper is 1pc, there is no separate lip

iirc, the OEM lights attach fine in the back of the bumper and there is no shroud...the hole is just the right size
WeeYariGeorgetown, Ontario, Canada · Nov 16, 2015#6
Originally Posted by thebarber ↑
The whole bumper is 1pc, there is no separate lip

That is incorrect. Take a look at pics of your own car. There is a thin grey gasket running a long the edge of the lip. It is two pieces.


Sent from my iPhone using Tapatalk
firebird1999usThread starterGeorgia · Nov 16, 2015#7
I'm trying to figure out where to get one of those said gaskets? Is that a common type of stripping?
WeeYariGeorgetown, Ontario, Canada · Nov 16, 2015#8
Originally Posted by firebird1999us ↑
I'm trying to figure out where to get one of those said gaskets? Is that a common type of stripping?
I don't believe it would be considered common. It is rubber and shaped kinda like a laxy Y. The stem of the Y is glued to the back of the lip with one arm of the Y running along the top of the lip. The other arm of the Y then presses up against the bumper when the lip is secured in place. Toyota should be able to identify it.
enviriCT · Nov 16, 2015#9
PZ321-12801 - FITTING KIT, FRONT BUMPER

or...get some 3m grey moulding tape, cut into thin strips. There may be metal brackets or some time of brackets (zip tie maybe) to hold the rest of the bottom of the spoiler for reinforcement.

my front lip (oem jdm) came with all mounting hardware, metal clips, moulding tape, alcohol..
the gasket is very similar to the one i used in the pic of my side skirt install (76925-52101-B1)

Picture not included in this copy
Picture not included in this copy
firebird1999usThread starterGeorgia · Nov 27, 2015#10
Originally Posted by enviri ↑
PZ321-12801 - FITTING KIT, FRONT BUMPER

or...get some 3m grey moulding tape, cut into thin strips. There may be metal brackets or some time of brackets (zip tie maybe) to hold the rest of the bottom of the spoiler for reinforcement.

my front lip (oem jdm) came with all mounting hardware, metal clips, moulding tape, alcohol..
the gasket is very similar to the one i used in the pic of my side skirt install (76925-52101-B1)

Picture not included in this copy
Picture not included in this copy
So PZ321-12801 is the actual fitting kit for the Yaris S front fasci to attach it to a stock bumper?
enviriCT · Nov 27, 2015#11
Its the fitting kit for a front lip for a yaris s..cant tell u what yr
WeeYariGeorgetown, Ontario, Canada · Feb 17, 2016#13
Originally Posted by tex ↑
Does I can't tell from the pictures if it has the front spoiler on it already? Also has anyone put the sedan bumper cover on the liftback. I like the look of the sedan grill better
Description for RS bumper states pre-drilled spoiler holes. There is no picture shown. As the RS is a two piece setup, the spoiler will not be included as a package.

No, a hatch bumper WILL NOT fit on a sedan.
MUSKOKA800Chatham, Ontario, Canada · Feb 18, 2016#14
Each and every part must be purchased separately if dealing with Toyota.