Yarisworld Archive

mechanical boost gauge

7 posts · 4,172 views

Innovative 1Original postGlendive, MT · Oct 28, 2015#1
Where is the best place to tie in a mechanical boost gauge?

Replies 6

CTScottUSA, CT · Oct 29, 2015#2
Make sure it is a combo vacuum/boost gauge, otherwise it might whistle in vacuum, like the one did that I originally installed. For installing it, the smaller vacuum hose, which connects to the intake manifold is the best place, unless your setup has a port for doing so (the Blitz SC for example has a 1/4" threaded port built right in to its manifold.)
tmontagueCaledonia Ont. · Oct 29, 2015#3
Scott, do you happen to have a pic of the vacuum hose you recommend using to tap the gauge into? Are you talking about the one that comes from the EGR?
Innovative 1Thread starterGlendive, MT · Oct 29, 2015#4
Power Enterprise is telling me to tie into vac hose going to p-con sub computer which is tied into vac line in between throttle body and purge valve.
CTScottUSA, CT · Oct 29, 2015#5
Originally Posted by Innovative 1 ↑
Power Enterprise is telling me to tie into vac hose going to p-con sub computer which is tied into vac line in between throttle body and purge valve.
There are no vacuum lines on the throttle body - Just coolant lines. The one I am talking about is the one that goes to the purge valve, but it is mounted to the intake manifold just past the throttle body.
tmontagueCaledonia Ont. · Oct 29, 2015#6
I see, that's an easy location to tap a gauge into. Thanks for the info
Innovative 1Thread starterGlendive, MT · Oct 29, 2015#7
Sorry CTScott. I meant to say past the throttle body.