BennyLavaOriginal postTexas · Oct 12, 2015#1Replies 11
BennyLavaThread starterTexas · Oct 13, 2015#2Anyone? Is anybody still out there?
CTScottUSA, CT · Oct 13, 2015#3For the sedan the adjuster is inboard and below of the headlight bulb. In your first picture it is the device just below the grey connector.
Originally Posted by
BennyLava ↑ Anyone? Is anybody still out there?
I prefer this...
https://www.youtube.com/watch?v=NP0mQeLWCCo Patients sometimes on this forum is needed...but you will get a response....usually, as in this case, from the master...CTScott.
BennyLavaThread starterTexas · Oct 22, 2015#5 Originally Posted by
CTScott ↑ For the sedan the adjuster is inboard and below of the headlight bulb. In your first picture it is the device just below the grey connector.
So its not actually visible in any of the pics I posted? There is one screw there, just making sure that's not it.
From your reply it looks like I could get to it easier, if I unplug that plug in the first pic. Would you say that the adjustment screw, is fairly easy to access?
CTScottUSA, CT · Oct 22, 2015#6 Originally Posted by
BennyLava ↑ So its not actually visible in any of the pics I posted? There is one screw there, just making sure that's not it.
From your reply it looks like I could get to it easier, if I unplug that plug in the first pic. Would you say that the adjustment screw, is fairly easy to access?
It is visible in the first pic. It is the device, which is a bolt with a large washer looking device under the head of it.
IllusionXBrossard, QC · Oct 22, 2015#7Hm? Put a Philips head screw driver in the hole. That's the adjuster for height. There are no horizontal adjustments AFAIK. If you look down there, you will see it, it can also be adjusted with a hex wrench.
Sent from my A0001 using Tapatalk
CTScottUSA, CT · Oct 22, 2015#8 Originally Posted by
IllusionX ↑ Hm? Put a Philips head screw driver in the hole. That's the adjuster for height. There are no horizontal adjustments AFAIK. If you look down there, you will see it, it can also be adjusted with a hex wrench.
Attachment 56051
Sent from my A0001 using Tapatalk
Correct - It is vertical only. There is no horizontal adjustment.
BennyLavaThread starterTexas · Oct 28, 2015#9 Originally Posted by
IllusionX ↑ Hm? Put a Philips head screw driver in the hole. That's the adjuster for height. There are no horizontal adjustments AFAIK. If you look down there, you will see it, it can also be adjusted with a hex wrench.
Thank you sir. I have been trying to get a straightforward answer out of this forum for a long time. You're the only one who's ever just spit out this simple answer.
And with it i was able to adjust the lights. Thanks again
BennyLavaThread starterTexas · Oct 30, 2015#10 Originally Posted by
CTScott ↑ It is visible in the first pic. It is the device, which is a bolt with a large washer looking device under the head of it.
Got this thread and this reply confused with another help thread I have on a different form.
That said, I noticed your reply says something totally different than his. You say its that one with the washer looking head, he says it those others. For me, the ones he said turned out to be the correct one.
So is the other one for something else?
yarisugiハワイ · Oct 30, 2015#11Here. IllusionX circled the same thing except that the part he circled, the adjusting screw, isn't visible, it's behind that plastic. So it looks like he circled those plastic tabs.
Hersheynortheast · Oct 30, 2015#12I would use the horizontal mortar lines of a brick wall to get headlight height the same . Park car on level ground about 5 feet away from side of a brick wall at night and make adjustments .