trini_per4manceOriginal postHollywood, FL · Aug 13, 2015#1As most of you guys know, I'm currently in the process of boosting my 545k mile 07 Yaris. I want to take every precaution possible to prevent any disasters. So, I plan on using the Bee R Rev Limiter. But I lost my service manual cd and need help installing the Bee R on my 07 Yaris S Sedan, which was actually built in 8/06. Any assistance with a wiring diagram of the ECU pin layout wld be greatly appreciated. The wiring diagram that came with the unit doesn't have any instructions specifically for the Yaris. The attached pic of the Bee R shows the wires. The instructions says that black=ground, white=parking brake, cut grey=4 cyl and it doesn't say what the other colors are for.... HELP!!!
Picture not included in this copy
Sent from my SAMSUNG-SM-N910A using Tapatalk
Replies 6
whooppee777Maryland · Aug 13, 2015#2Downloaded the service manual from this link about 2 months ago. You'll need to download from all 3 links to have the complete manual.
http://villdemar-yaris.blogspot.se/2...007-finns.html Unless you're asking for a manual for the Bee R in which case I've got nothing. never even heard of such unit until now.
trini_per4manceThread starterHollywood, FL · Aug 13, 2015#3 Originally Posted by
whooppee777 ↑ Downloaded the service manual from this link about 2 months ago. You'll need to download from all 3 links to have the complete manual.
http://villdemar-yaris.blogspot.se/2...007-finns.html Unless you're asking for a manual for the Bee R in which case I've got nothing. never even heard of such unit until now.
Thanks whooppee777! Now I just have to figure out the wires on the Bee R.
Sent from my SAMSUNG-SM-N910A using Tapatalk
whooppee777Maryland · Aug 13, 2015#4I also just stumbled upon this.
Link to a thread or page that is not in the archive
Looks like member S2robbin installed the same unit, I'd send him a PM.
yarisugiハワイ · Aug 13, 2015#5Hope this helps.
2nd image is from
this link.
2 attachments not included in this copy
trini_per4manceThread starterHollywood, FL · Aug 14, 2015#6 Originally Posted by
yarisugi ↑ Hope this helps.
2nd image is from
this link.
Thanks yarisugi! I think I have everything figured out now thanks to whooppee777 and yarisugi!
simjoellSingapore · Dec 2, 2018#7Sorry for bumping up an old thread but.. how did you install it in the end? I keep facing issues where it would not hold RPM