Yarisworld Archive

Blitz Supercharger Kit

26 posts · 16,719 views

AzianCuzOriginal postLong Beach, CA · Aug 7, 2015#1
Good morning everyone,

I was just wondering if anyone with the Blitz Compression Kit had missing parts or if these parts are not suppose to come with the kit?

I received my kit this week but it seems to be missing 3 items from the manual which are:

15. Pulley w/Ribs

21. Throttle Body Gasket

26. Regulator

Picture not included in this copy

Replies 25

CTScottUSA, CT · Aug 7, 2015#2
None of those three are used for the Yaris.
AzianCuzThread starterLong Beach, CA · Aug 10, 2015#3
Appreciate the feed back CTScott
AzianCuzThread starterLong Beach, CA · Aug 11, 2015#4
Here's what I got in the package, plus the intake manifold gasket which I did not take a picture of and a bracket. Anyone else got this?

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
KTSTrinidad and Tobago · Aug 11, 2015#5
I got a s/c kit from a scion so it had to be modified to fit the yaris/vitz.
1. 3 bolt throttle plate (on #4 inlet pipe) was cut off and a 4 bolt throttle plate welded on for the yaris dbw throttle body
2. the 2" straight silicone coupler that connects the chamber to the inlet pipe was replaced with a 45 degree 2" silicone coupler.
3. I cut the inlet pipe below the upper threaded fitting.
#2 and #3 allows me to use the stock airbox for a much more original look.
will post pics later showing these mods.
AzianCuzThread starterLong Beach, CA · Aug 11, 2015#6
Awesome 🙌 sounds like a lot of work. But yeah any information on these kits will help. I haven't installed mine yet. Still waiting for BlitZ to give me the info on if the missing parts I showed are suppose to be in the kit or not.
AzianCuzThread starterLong Beach, CA · Aug 11, 2015#8
That's freaking awesome! Running it on all full stock?

An update from my end: So I just got an update from the dealer I got the S/C kit from. He said that they will be sending replacement parts for the missing parts. I will post updates on the thread when it arrives. So I am assuming it's a "COMPLETE" full on kit.
AzianCuzThread starterLong Beach, CA · Aug 11, 2015#9
Here's what came in my kit besides the missing parts. And it also came with a intake manifold gasket which I didn't take a picture of. But I guess they will send me the missing parts. So it is a "COMPLETE" kit.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

🙇
CrankyOldManWest Michigan · Aug 11, 2015#11
WARNING: Boosting your Yaris is known to the state of California to be hazardous to your wallet. Symptoms may include consumption of premium fuel, decreased fuel economy and uncontrollable grinning.
AzianCuzThread starterLong Beach, CA · Aug 11, 2015#12
Loving the BLUE!
AzianCuzThread starterLong Beach, CA · Aug 12, 2015#13
Confirmed The Kit Is Complete. The missing parts is for the "Vitz" Version.
KTSTrinidad and Tobago · Aug 12, 2015#14
that's great. are you doing the install? have fun.
AzianCuzThread starterLong Beach, CA · Aug 12, 2015#15
Hell no... Going let my mechanic do it, but I'll be sure to tell him to take pictures.
AzianCuzThread starterLong Beach, CA · Aug 14, 2015#16
So this belt is too long...

Picture not included in this copy
AzianCuzThread starterLong Beach, CA · Aug 17, 2015#17
Super charger is in but now working on the electrical portion. The main dealer fuse popped so I am waiting for that and we will do a test run. 👍 (crosses-fingers.)

Now does it matter that my car is an automatic transmission and using the fuel controller for the manual transmission? That's what Blitz sent me. Let me know.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
KTSTrinidad and Tobago · Aug 17, 2015#18
It is rumored that the AT and MT fuel controllers are the same.
KTSTrinidad and Tobago · Aug 17, 2015#19
I have an AT fuel controller if u wanna do a switch as my car is MT.
AzianCuzThread starterLong Beach, CA · Aug 19, 2015#20
Thanks fellas for all the help!

Picture not included in this copy
AzianCuzThread starterLong Beach, CA · Aug 19, 2015#21
Hi switch setting not boosting, anyone have this problem? Help...
KTSTrinidad and Tobago · Aug 19, 2015#22
What afr are you experiencing? What injectors re you using? Experiencing any detonation? I don't have an input concerning the switching issue.
tempest404Brisbane, AUS · Aug 28, 2015#23
Really thinking about this kit myself. Did it require tuning? Aftermarket ecu? or is it truly a straight bolt on?
WeeYariGeorgetown, Ontario, Canada · Aug 28, 2015#24
Straight bolt on.


Sent from my iPhone using Tapatalk
CrankyOldManWest Michigan · Aug 29, 2015#25
Originally Posted by AzianCuz ↑
Hi switch setting not boosting, anyone have this problem? Help...
It's set to engage at 75% throttle. If you don't have an OBDII scanner, see if you can borrow one and read the TPS. I'm not sure why you would want it to engage at that point--I tried it at medium during an autoX once and hated it.
AzianCuzThread starterLong Beach, CA · Aug 31, 2015#26
I've seen people Dyno their Yaris but has anyone tuned it with the Blitz S/C and is it worth doing so with my current mods, I don't get any Check Engine Light. Let me know fellas, appreciate the feedback as always.