Yarisworld Archive

rear hub spacers

10 posts · 3,676 views

tmontagueOriginal postCaledonia Ont. · Jul 31, 2015#1
Has anyone had any luck sourcing these now that MI is out?

I don't want to install wheel spacers but I like the hub spacers. If I can't find them anywhere is it a bad idea to just use washers and find longer hub bolts to essentially do the same thing?

Replies 9

RigaudRigaud, Quebec, Can. · Jul 31, 2015#2
Just use the right thickness wheel spacers. We use them with 500whp applications on Audi's. Really no issues especilly a Yaris and the rear too.
tmontagueThread starterCaledonia Ont. · Jul 31, 2015#3
I don't like the idea of having 8 bolts instead of 4. I'm also not a fan of having the wheel too much further out from the bearing in regards to bearing life.

That's why I like the hub spacers so muc. No extra hardware other than longer screws.
RigaudRigaud, Quebec, Can. · Jul 31, 2015#4
Originally Posted by tmontague ↑
I don't like the idea of having 8 bolts instead of 4. I'm also not a fan of having the wheel too much further out from the bearing in regards to bearing life.

That's why I like the hub spacers so muc. No extra hardware other than longer screws.
For the distance you would use, it's a myth about stress and bearing life.

For a hub spacer, your idea of washers is not ideal since you wouldn't have full face contact and all the stress would be on the 4 bolts only.
tmontagueThread starterCaledonia Ont. · Jul 31, 2015#5
Good point about the washer idea. I just don't feel fully safe with wheel spacers. I plan on buying new rims. For my Yaris next summer so i'll likely just run a 35 offset and maybe more in the rear instead of running spacers.
WeeYariGeorgetown, Ontario, Canada · Jul 31, 2015#6
You don't need the wheel spacers that bolt to the hub and then bolt the wheel to the spacer. I've been running 10mm ichiba wheel spacers for a lot of years with no issue. Only had to replace stock studs with ones 10mm longer and good to go.


Sent from my iPhone using Tapatalk
tmontagueThread starterCaledonia Ont. · Jul 31, 2015#7
Where'd you get the longer studs from?
WeeYariGeorgetown, Ontario, Canada · Aug 1, 2015#8
^ Napa. Somewhere on here I have posted the part# of the stud bolts I got from them. Search 'napa stud' and I believe you'll find the thread.


Sent from my iPhone using Tapatalk
tmontagueThread starterCaledonia Ont. · Aug 1, 2015#9
Will do, thanks!
ExiwolfmanWasaga beach · Aug 3, 2015#10
have a set of hub spacers 10mm with bolts used that i got used but have not used...just lazy plus dont feel like getting new wheel bearings lol to do the job and yes u will need a set on a winter driven cars that have seen few winters .
They sit behind the hub just what ur looking for if interested .