brushforhireOriginal postJohnstown, PA · Jul 9, 2015#1Is the Zage turbo kit still available? I can't seem to find anywhere to purchase it?
Or does anyone have any other suggestions for a good kit? I saw a company called Turbo Specialties, but I read alot of sketchy stuff about them.
Or at least a decent manifold and down pipe that I can source out the rest of the kit myself?
I don't have anywhere near me that really does custom work, or at least any I would trust when I comes to stuff like that.
Replies 20
brushforhireThread starterJohnstown, PA · Jul 9, 2015#2This is about the only turbo kit I can find right now. I did some more digging and it seems like it is a decent company, and it comes complete with engine management.
Turbo Specialties. brushforhireThread starterJohnstown, PA · Jul 16, 2015#3So I received what I needed to know about the Zage kit, and should hopefully have a kit in my hands shortly. I would like to use this thread as my build thread. It will a slow and methodical thread explaining what I am doing along the way and why. I hope to be able to help others who want to do this too. I have been throughly inspired by others on this forum and totally excited to make this journey too.
I hope to eventually be in the 250+ hp range.
ilikericesavannah, ga · Jul 16, 2015#4good luck. These are always interesting to watch.
FreestylinCalgary, Alberta · Jul 16, 2015#5 Originally Posted by
brushforhire ↑ So I received what I needed to know about the Zage kit, and should hopefully have a kit in my hands shortly. I would like to use this thread as my build thread. It will a slow and methodical thread explaining what I am doing along the way and why. I hope to be able to help others who want to do this too. I have been throughly inspired by others on this forum and totally excited to make this journey too.
I hope to eventually be in the 250+ hp range.
Thats good to hear! Are you going to be changing out the stock internals of the motor for the 250hp build? Usually, the stock internals can handle about 10psi at most before you run into reliability issues. Running 10psi will probably get you into the 170-180hp range.
brushforhireThread starterJohnstown, PA · Jul 16, 2015#6I do plan on a build after I get the initial install of the turbo kit done. I work at a dealership, so I can get some decent prices on used engines. I plan on doing a build on an engine stand on a second engine.
I want this project done, but not gonna rush anything.
WorkTLSoCal · Jul 17, 2015#7Can you please PM me where you got the Zage? I'm in the market myself.
WeeYariGeorgetown, Ontario, Canada · Jul 17, 2015#8 Originally Posted by
WorkTL ↑ Can you please PM me where you got the Zage? I'm in the market myself.
Just post up parts sources here. No reason why where stuff can be purchased should be kept secret.
brushforhireThread starterJohnstown, PA · Jul 17, 2015#9All secret! Sorry. J/K!
I messaged Cali Yaris. He said he can still get them.
I plan on posting how I install everything, along with were I got the parts along the way.
Originally Posted by
WorkTL ↑ Can you please PM me where you got the Zage? I'm in the market myself.
You can order the kit directly from Zage.
brushforhireThread starterJohnstown, PA · Jul 17, 2015#11I tried contacting Zage before I found out Cali could them for me, and I never received any response back. It always bother's me when I tell someone I want to give them my money and they make me work to give it to them.
fnkngrvIn The Hotbox · Jul 19, 2015#12I ran 9psi with my custom setup and was pushing around 190 to the wheels. Going 10 on stock internals WILL cause accelerated engine wear requiring a rebuild much sooner. 170 to the wheels in this car is very fun. Really isn't any reason to get to 250 unless you just have cash to burn as it will require a bottom end build at the least. You will also lose 15 or so mpg at that power number. It will require a full fuel system upgrade. Lastly I am pretty sure the Zage will not get you to 250 anyway. Best of success with your build and ask questions if you need to. Btw I have a head with valves I am selling for 250 for someone to do a port n polish on. Pretty good price as it only has 35k miles on it.
Sent from my SCH-I545 using Tapatalk
brushforhireThread starterJohnstown, PA · Jul 20, 2015#13ugh, I'm so torn. I just called my local yard, and they can hook me up with an XD 1.8 and ECM for $750. I am thinking I want to go and swap that in and then turbo that instead.
Opinions?
WeeYariGeorgetown, Ontario, Canada · Jul 20, 2015#14Do the 1.8!
Not enough documented engine swaps around here.
Sent from my iPhone using Tapatalk
brushforhireThread starterJohnstown, PA · Jul 20, 2015#15 Originally Posted by
WeeYari ↑ Do the 1.8!
Not enough documented engine swaps around here.
Sent from my iPhone using Tapatalk
That is one of the reasons, I was thinking about doing that also. To do a "how-to" type of deal. Or more accurately "how I fumbled through an engine swap, so anyone can do it" thread.
Since I can't make up my mind, I decided to start a poll and see what everyone else thinks!
fnkngrvIn The Hotbox · Jul 20, 2015#16Do the swap and boost that. If I hadn't done had the engine I have now I would have done the swap then boost it to 8-10psi. That should get you to 220 easy I would think. Might even be able to do it without a fuel system upgrade either.
Sent from my SCH-I545 using Tapatalk
invader166Langley, BC · Jul 21, 2015#17I might be one of the few, if not the only one who thinks you should keep the original engine. This is only because you're kinda going into unknown territory. Yes, that new engine might bolt-up and work just fine, but keep it mind that the vehicle was originally designed for a different engine. You don't know how it will affect your chassis, suspenssion, etc...(or maybe someone has documented this, if so feel free to jump in)
Of course cars are overbuilt to have a certain factor of safety, but with a new engine, who knows? You and your passenger's safety might not be as high in the event of a collision. (not that I ever want you to have one of course)
brushforhireThread starterJohnstown, PA · Jul 21, 2015#18That is a good thought, but I thought in Europe and japan they were available from the factory with the 1.8. So, I would assume, that they would be virtually the same and the chassis would be okay.
WeeYariGeorgetown, Ontario, Canada · Jul 21, 2015#19 Originally Posted by
invader166 ↑ Yes, that new engine might bolt-up and work just fine, but keep it mind that the vehicle was originally designed for a different engine. You don't know how it will affect your chassis, suspenssion, etc...(or maybe someone has documented this, if so feel free to jump in)
The TS trim is factory 1.8, same chassis.
Bluevitz-rsOshawa, Ontario, Canada · Jul 21, 2015#202ZR-FE.
fnkngrvIn The Hotbox · Jul 21, 2015#21There have already been more than a few 2zr swaps documented. Just not here. None of them afaik I know went boosted however. There have been other engine swaps to include a 3gste and 2zz swaps in PR. The safe concerns are valid however I would not anticipate they are severe since the under chassis is similar to the xD.
Sent from my SCH-I545 using Tapatalk