Yarisworld Archive

jacking up the car

11 posts · 5,059 views

esse10Original postrichmond TX. · Jul 7, 2015#1
Anybody ever lift the car using floor jacks under the control arms? Will that damage the control arms ? kinda like where I have the red arrow at in this picture?
images.jpg

Replies 10

yarisugiハワイ · Jul 7, 2015#2
Picture lost · okayface.com
tmontagueCaledonia Ont. · Jul 7, 2015#3
Not where you put the arroow, but on my Echo because the underbody is so rusted I jack up just under the subframe. I then place jacks on the sides behind the wheels.

I have done this for the past 2 years with no issues, I just do so carefully. I have also jacked the control arm up to put weight. On the suspension when I replaced the end links. I did this when they car was resting on jacks under the sides.
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Jul 7, 2015#4
Originally Posted by yarisugi ↑
Picture lost · okayface.com
🤣🤣🤣🤣
2009ToyotoadCalifornia · Jul 7, 2015#5
Likely you'll bent it. Not a good call.
ExiwolfmanWasaga beach · Jul 7, 2015#6
Not a problem it's fine do it all the time on alignment rack and no u won't bend ur control arms.

Sent from my ASUS_Z00AD using Tapatalk
FreestylinCalgary, Alberta · Jul 8, 2015#7
^ Big lady says no... no. no. no..
esse10Thread starterrichmond TX. · Jul 8, 2015#8
Originally Posted by Exiwolfman ↑
Not a problem it's fine do it all the time on alignment rack and no u won't bend ur control arms.

Sent from my ASUS_Z00AD using Tapatalk
thanks, kinda what I thought but needed more confirmation from past experience folks or realtime mechanics
CoryMWhite Rock BC · Jul 8, 2015#9
Closer to the balljoint, but yes it is fine to lift there. Just be aware that the ctrl arm can angle when jacking. If your jack-pad is steel, it may slip off so watch that. I prefer to jack on the subframe bolts etc.

Cheers.
hachi-roku_fanSouth Gate · Jul 11, 2015#10
Is there a reason why you aren't using the usual lift spot? Like Cory stated, the control arm is a pivoting piece and will move as you're lifting, which is why most people don't do it
esse10Thread starterrichmond TX. · Jul 13, 2015#11
Originally Posted by hachi-roku_fan ↑
Is there a reason why you aren't using the usual lift spot? Like Cory stated, the control arm is a pivoting piece and will move as you're lifting, which is why most people don't do it
just checking my options, but I believe using the subframe is a better place to jack up the car. thank y 'all for the replys