Yarisworld Archive

NCRC ThunderHill 7/11-12

26 posts · 10,383 views

ArmstrongRacingOriginal postSan Diego · Jun 25, 2015#1
I'm signed up for the Thill East 3 mile course on 7/12....stay tuned

Replies 25

ArmstrongRacingThread starterSan Diego · Jul 1, 2015#2
Installed the recommended fire extinguisher, just gotta get my Cosworth T-stat now!

1 attachment not included in this copy

Jason@SportsCarDebary, FL · Jul 1, 2015#3
Originally Posted by ArmstrongRacing ↑
Installed the recommended fire extinguisher, just gotta get my Cosworth T-stat now!
Is that a plastic strap holding it in?
ArmstrongRacingThread starterSan Diego · Jul 2, 2015#4
Yes, it has a plastic mount. A holder at the neck and this strap in the center.

...NCRC didn't specify a type of mount, I'm guessing you would recommend a metal bracket lol. Im a track noob
ArmstrongRacingThread starterSan Diego · Jul 11, 2015#5
Lowtemp thermostat arrived today, just in time for this weekend! Thanks Jason!

1 attachment not included in this copy

ern-dizCA all day · Jul 13, 2015#7
So cool. Thx for sharing.
ArmstrongRacingThread starterSan Diego · Jul 13, 2015#8
No problem! I had a great day there, passing many cars that were surprised a yaris was there....and they would come over later to inspect and ask "why so quick"....my only answer was "Tires and autocross experience". Big thanks to Jason and Bobby for helping me prepare!
ilikericesavannah, ga · Jul 14, 2015#9
Looked great out there. Yea, Whenever I go to Roebling Road Race way here for a track day. there are 9 turns and 1 long straight away. Which is fun because I tend to always catch the Mustangs and other high dollar cars by turn 5. Track days are so much fun
ArmstrongRacingThread starterSan Diego · Jul 14, 2015#10
Same here, catching everyone in the turns after they blow by on the straights haha. The only problem is, going over the cyclone with less than half a tank of fuel, I got fuel starvation a few times and went into limp mode....just cycled the key and went back to it! Haha
ilikericesavannah, ga · Jul 14, 2015#11
HAhAhA.. I have yet to have fuel starvation yet and I run with 1 bar blinking fast at autocross events sometimes.
ArmstrongRacingThread starterSan Diego · Jul 14, 2015#12
I do the same in autox....with no issues. I guess when you add rapid elevation change and a 1G turn....thats when it happens.
ilikericesavannah, ga · Jul 15, 2015#13
Hmm.. probably.
ArmstrongRacingThread starterSan Diego · Jul 22, 2015#14
Well, the days following my track sessions revealed another weakness in my car setup...mainly the seat. My forearms were very sore for about 3 days after doing the 5, 20 minute sessions. I have a quick release harness for my stock Sedan S seat, and it works great in autocross...but clearly that's not sufficient for the track. Turn 2 at ThunderHill is a long left turn at about 70mph, easily 1G....and I can remember struggling to hold on towards the end of my sessions. A new 5pt harness is on the way also.

1 attachment not included in this copy

ilikericesavannah, ga · Jul 23, 2015#15
Are you using a harness bar? if so, is it custom make or is it one of those ebay "universal" ones? Or is there a reputable vendor that you buy from?
ilikericesavannah, ga · Jul 23, 2015#16
Thats funny, I got the same seat but probably the 5th version prior to that one about 15 years ago

Sparco Seat installed
ArmstrongRacingThread starterSan Diego · Jul 23, 2015#17
Haha! Seat bro's!

I dont know if I need a harness bar...my other harness came with guidelines for mounting the shoulder straps to the rear seat buckle locations....Ill see when it comes in
ArmstrongRacingThread starterSan Diego · Oct 30, 2015#18
Here are my harness attachment points per the instructions...

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Oct 30, 2015#19
Antisubmarine

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Oct 30, 2015#20
Right side

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Oct 30, 2015#21
Shoulder straps

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Oct 30, 2015#22
Sparco base installed

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Oct 30, 2015#23
Sparco sidemount brackets

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Oct 30, 2015#24
Finished product!

1 attachment not included in this copy

Jason@SportsCarDebary, FL · Oct 30, 2015#25
Originally Posted by ArmstrongRacing ↑
Sparco base installed
That is a nice piece.
ArmstrongRacingThread starterSan Diego · Oct 31, 2015#26
It is! It was totally worth $160 and 5 weeks production time!