Hey everyone. I was just wondering if any of you guys have an exhaust on your yaris. Around how much would it cost with the installation?
Yaris exhaust
12 posts · 6,168 views
Replies 11
i cut the stock off, used flex pipe, clamped and taped; used a resonator tip & taped. Sounds great. About $35.Originally Posted by jari93 ↑Hey everyone. I was just wondering if any of you guys have an exhaust on your yaris. Around how much would it cost with the installation?
Just a heads up for you if you look at Stickys above, you will notice that there is a whole thread on the Custom Exhaust
But also I am running a 2" cat back system I'm at about $600 into it with out the headers and probably $200 more on the headers
But also I am running a 2" cat back system I'm at about $600 into it with out the headers and probably $200 more on the headers
I'm running a Weapon R header...
Picture not included in this copy
...with a Micro Image Magnaflow center exit exhaust.
Picture not included in this copy
It sounds great! The total cost was about $600 and well worth it. 🙂
Greg
Picture not included in this copy
...with a Micro Image Magnaflow center exit exhaust.
Picture not included in this copy
It sounds great! The total cost was about $600 and well worth it. 🙂
Greg
I have an exhaust for sale for the sedan if you are interested.Originally Posted by jari93 ↑Hey everyone. I was just wondering if any of you guys have an exhaust on your yaris. Around how much would it cost with the installation?
i'm looking at the OBX header with header-back i keep seeing on ebay. looks like a good bang for your buck. most likely loud as hell
I got a TRD header
Picture not included in this copy
with a fujitsubo Wagolis exhaust.
Picture not included in this copy
It sounds great! Not loud at all, no subie like burble from the stock header.
parts cost was like..1100-1200$, no labor cost. JDM yo.
Picture not included in this copy
with a fujitsubo Wagolis exhaust.
Picture not included in this copy
It sounds great! Not loud at all, no subie like burble from the stock header.
parts cost was like..1100-1200$, no labor cost. JDM yo.
Good lord Enviri, do you have any sound clips of your combo?
2" Straight Pipe from Cat-back to 2 1/2" Tip....too loud, deep growl from 0-4.5k, anything more than that starts sounding ricey. $40 install including pipe/muffler from local shop.
Just curious what are my options for exhausts that are larger then 2" I know obx is 2.25" but what else is The same or bigger.
I'm also looking for a deep lower pitch tone and was told A nice longer tube resonator would help get rid of the higher pitch ricey tones.
I'm also looking for a deep lower pitch tone and was told A nice longer tube resonator would help get rid of the higher pitch ricey tones.
I bought a Magnaflow catback from Exhaust Kit|4wheelonline. Hopefully I will have the time to install it next week. The piping is 2.25 inch and tip is 3.5". Bought one because my buddy has this exhaust and it has a nice deep tone.
Thanks for the info I just got in the weapon R header and was disappointed that it only had a 2" out I swore I read it had a 2.5" collector which made me assume that ment 2.5" outlet bit I guess I was wrong.
What flows better 2.5" crush bent or 2.25" mendrel bent I assume. The obx is mendrel bent.
Thinking of getting the OBX exhaust for the header back piping and change to a magnaflow muffler to get a nice low tone from the exhaust.
What flows better 2.5" crush bent or 2.25" mendrel bent I assume. The obx is mendrel bent.
Thinking of getting the OBX exhaust for the header back piping and change to a magnaflow muffler to get a nice low tone from the exhaust.