2009ToyotoadOriginal postCalifornia · May 13, 2015#1I've read several of the fog light install threads, even seen a Youtube video on one with a really good Combi stalk install using OEM part number #84140-52151 and relay #90987-02027. What puzzles me is why I can't find the OEM or TRD fog light kit. the best I've been able to find is an ebay JDM fog light kit.
Unfortunately, I can't use the switch location for the switch in the JDM kit because I have both the Bluetooth and Toyota VIP alarm indicator use the otherwise vacant spaces in the center console for the 2009 MY.
So the plan is to have a pro install the JDM kit with the Combi stalk and Toyota relay, as I'm not up to dealing with the clock spring to remove the steering wheel/airbag assembly.
Has anyone else done the fog light install using the combi switch and factory relay? How many hours are needed? I ask because my "pro" does not know and I'd like an guessimate before commiting the funds to buy the parts.
Replies 22
CTScottUSA, CT · May 13, 2015#2This is how I installed my switch (and how the Micro Image plug and play foglight kit was setup):
Picture not included in this copy If you use a switch (or the OEM combination stalk) and the OEM relay, the only other thing you need is a set of the pins for the under-hood fuse box connector to install any set OEM style.
The attached PDF shows the install of the Micro Image kit. Following this procedure the installation should not take more than 2 hours.
Micro Image 06-11 Yaris Plug-n-Play Fog Light Kit Installation.pdf
1 attachment not included in this copy
2009ToyotoadThread starterCalifornia · May 14, 2015#3Thanks, In the event that Garm has no more kits will this work with the ebat JDM kits?
CTScottUSA, CT · May 14, 2015#4 Originally Posted by
2009Toyotoad ↑ Thanks, In the event that Garm has no more kits will this work with the ebat JDM kits?
I have never seen the JDM kits or their install docs, so I am not sure.
2009ToyotoadThread starterCalifornia · May 16, 2015#5Still have not heard back from Garm. I did find something interesting though, the Toyota part number for the Wiring harness with fog lights. 82112-52430 where as the one without foglights is 82112-52420.
MedMantleSouth Africa · May 16, 2015#6 Originally Posted by
CTScott ↑
If you use a switch (or the OEM combination stalk) and the OEM relay, the only other thing you need is a set of the pins for the under-hood fuse box connector to install any set OEM style.
Hey, I know it's not 100% correct but when I installed my wires from my fogs into the fuse box I used one normal push-on-lug and it slid very snugly over the 2 pins in the fuse box. It's been a year and no problems and I just used the rear fog light (which I never use) relay and moved it to the front fog lights relay position. But we rarely ever have foggy days 🤷
M4OneVancouver, BC · May 19, 2015#7I got the kit from Garm and just wanted to double check. Not all the wires from the switch are needed to be connected? Just wondering what the green and brown wires are for?
invader166Langley, BC · May 19, 2015#8They are for the LED of the switch itself. You're supposed to splice them into the dimmer rheostat connector. You can choose if you want to connect them or not, though personally I don't think it's really necessary, because you have an indication in your dashboard whenever you activate your fog lights.
M4OneVancouver, BC · May 19, 2015#9Okay, thanks.
CTScottUSA, CT · May 20, 2015#10The PDF that I posted above shows the connections for the two light wires. They are to show you where the switch is, not if the lights are on.
M4OneVancouver, BC · May 26, 2015#11So I finally got around to installing the fog lights from Garm and as expected with my luck, they do not work. I connected the lights using yellow with yellow and the gray wire with the beige wire. The ground wire is tight and so are the connections to the fog light themselves. The only possible problem I might see is that one of the wires going into the fuse box came loose when I was installing them, but I clamped it back down and it should be okay.
Would it still be possible to install using a different method? What would happen to the wires that I use the splice connectors on?
CTScottUSA, CT · May 26, 2015#12 Originally Posted by
M4One ↑ So I finally got around to installing the fog lights from Garm and as expected with my luck, they do not work. I connected the lights using yellow with yellow and the gray wire with the beige wire. The ground wire is tight and so are the connections to the fog light themselves. The only possible problem I might see is that one of the wires going into the fuse box came loose when I was installing them, but I clamped it back down and it should be okay.
Would it still be possible to install using a different method? What would happen to the wires that I use the splice connectors on?
In that mode, the headlights need to be on and in low beams for them to light up.
M4OneVancouver, BC · May 26, 2015#13I have the head lights on and nothing. Even tried with the high beams on. Nothing. I don't what I've done wrong Am I suppose to add a fuse?
CTScottUSA, CT · May 26, 2015#14 Originally Posted by
M4One ↑ I have the head lights on and nothing. Even tried with the high beams on. Nothing. I don't what I've done wrong Am I suppose to add a fuse?
You should check to make sure it is present in the under-dash fuse panel (FR FOG). Also, I assume you added the relay?
You can bypass the switch assembly using a jumper wire (or paperclip) between the yellow and beige wires. If the relay and fuse are installed you should hear the relay click when you jump those two or flip the switch. If you do, then everything inside the car is fine and the issue is under the hood.
M4OneVancouver, BC · May 26, 2015#15There is no fuse. Should be blue 15? Hopefully that is it. Need to go buy. Thanks for the help Ctscott. Hopefully I won't need to bug you about this problem again.
Edit: That was the problem. No fuse. Thanks a million Ctscott for your help and the instructions.
M4OneVancouver, BC · May 26, 2015#16Just realized there is a bit of gap between the lights and covers. Should I be worried about water getting in?
CTScottUSA, CT · May 27, 2015#17 Originally Posted by
M4One ↑ Just realized there is a bit of gap between the lights and covers. Should I be worried about water getting in?
The gap is normal. The lights themselves are sealed.
rapev-8WI · May 27, 2015#18CTscott i have the same set up as you but last year my mirco image fog lights stop working!!!! the fog light indicator light also stop working on the dash. anyway you may have an idea where to look trouble shoot it? BTW i have the same switch as you posted on top
CTScottUSA, CT · May 27, 2015#19 Originally Posted by
rapev-8 ↑ CTscott i have the same set up as you but last year my mirco image fog lights stop working!!!! the fog light indicator light also stop working on the dash. anyway you may have an idea where to look trouble shoot it? BTW i have the same switch as you posted on top
Check the relay and the fuse
rapev-8WI · May 27, 2015#20im sorry CTscott im so blond, but wheres the fuse for the fogs?
jeffdoyquebec · Jun 24, 2015#21hmm , somebody know how to bypass the relay from cheap jdm kit ? because i want to use the oem toyota .
MedMantleSouth Africa · Jul 26, 2015#22I think I should take some pictures of what I did! Works like stock and I have had zero problems since I installed them! It's based on the DIY's on here and it's so much easier than going throught the firewall. I have the EBay kit and I just used parts already in the car to make it all happen.
Do post your work...in the absence of the Micro Image kit...there will be more of the junk ebay kits getting installed, and with questions. I kinda fell into that camp when my wife bought me a non micro image kit, not from ebay, but still not the one I wanted. it was a little more work but with help from CTScott, I did it. And by the way, I was fortunate that he did help as those off brand kits, I feel, are a thorn in his ass. But I could be wrong.