"G"Original postChicago · May 4, 2015#12007 sedan with 180k on it. Lately I've been getting exhaust gases coming in to the cabin at idle. I always have my fan on fresh air. Do you think it's just the gasket in between the mani & down pipe? I know there was a tsb on this but i'm way beyond the 80k warranty lol. I doubt it's the ex mani gasket since the mani has a brace so there should not be much flex.
Picture lost · s27.postimg.org
Picture lost · s27.postimg.org
Replies 24
WeeYariGeorgetown, Ontario, Canada · May 4, 2015#2The way your 2 flanges have been compressed together tells me that your gasket is totally shot. That is definitely your issue.
"G"Thread starterChicago · May 4, 2015#3Really? There is supposed to be a bigger gap?
WeeYariGeorgetown, Ontario, Canada · May 4, 2015#4You have no gap. With an intact gasket in there you will have a gap of 3/16" or so. Also, the age and mileage of your car pretty much dictates the gasket is shot.
Sent from my iPhone using Tapatalk
tmontagueCaledonia Ont. · May 4, 2015#5Yup, what Yari said. The gap you should see is created by the gasket filling in the space of the gap. Your gasket is so worn down that it's just metal to metal.
With how rusted those bolts are you should be replacing them anyways to make it easier to do down the road. Spray them with a penetrating oil every day for a week before you want to do them. I'd also buy a set of sockets for rounded bolts that was my saving grace to get my bolts out and I only have 139'000km on my Yaris. I think the sockets are called bolt outs.
"G"Thread starterChicago · May 4, 2015#6I hear ya. Looks like it'll be a fun job. Ordered up 2 new bolts, 2 springs & the gasket.
"G"Thread starterChicago · May 6, 2015#7New partz. 30% off list, looking for a source who has a more aggressive discount.
17451-21070 gasket $30.15
90501-a0005 spring $3.62
90080-10291 bolt $3.38
Picture lost · s16.postimg.org
Picture lost · s16.postimg.org
IllusionXBrossard, QC · May 6, 2015#8Sounds about right. Convert this to CAD and they are way too expensive!
tmontagueCaledonia Ont. · May 7, 2015#9Get them off of RockAuto.com much better deal. The bolts aren't exactly the same as oem but they work the same. You may have to file down the inside of the washer so it fits all the way onto the bolt like I had to, but the savings is well worth the extra 5mins of time
ExiwolfmanWasaga beach · May 7, 2015#10And by looking at the shape of the original ull need heat ...what ever u do don't brake them.
IllusionXBrossard, QC · May 7, 2015#11 Originally Posted by
Exiwolfman ↑ And by looking at the shape of the original ull need heat ...what ever u do don't brake them.
I shot liquid wrench on the muffler one. Let it soak for about 5 mins and put the impact to take it out. It came out like butter. It did look like the front ones of OP.
I tried to undo it by hand, never again.
ExiwolfmanWasaga beach · May 7, 2015#12 Originally Posted by
IllusionX ↑ I shot liquid wrench on the muffler one. Let it soak for about 5 mins and put the impact to take it out. It came out like butter. It did look like the front ones of OP.
I tried to undo it by hand, never again.
One can try that for sure I would be worried about the location its at ...muffler are not a big deal if u snap a bolt ...manifold is another story.
To be safe apply heat to the back over the nut than brake free with hand tool followed with air gun....i would also use an extractor socket.
Bluevitz-rsOshawa, Ontario, Canada · May 7, 2015#13Yeah use a torch. A good propane one might get it hot enough to turn it orange and then crack it free. Don't just try and do it cold. More than likely it'll snap. I've done a few and know.
IllusionXBrossard, QC · May 9, 2015#14Oh.. I jacked the car up and thought I'd do the gasket. Looking at the bolts, I just said no.
Picture lost · images.tapatalk-cdn.com
tmontagueCaledonia Ont. · May 9, 2015#15My bolts looked the same as yours when I did them. I sprayed them w/ pb blaster from both sides (you can access threads from other side) and one came off fine. The other bolt stripped but I was able to get it off easily with a bolt off socket.
It's worth a shot and if it doesn't work just take it to an exhaust shop
ExiwolfmanWasaga beach · May 9, 2015#16 Originally Posted by
tmontague ↑ My bolts looked the same as yours when I did them. I sprayed them w/ pb blaster from both sides (you can access threads from other side) and one came off fine. The other bolt stripped but I was able to get it off easily with a bolt off socket.
It's worth a shot and if it doesn't work just take it to an exhaust shop
It's not worth a shot ...u got lucky.
If u don't have the means take it to any muffler shop it will cost lot less to fix something that has not been messed with.
You need a torch get it nice and cherry red than use a socket extractor to brake loss afterwards air gun if u like.
IllusionXBrossard, QC · May 9, 2015#17Yeah, the other side is rusted completely smooth, I'm not gonna take a chance.
Will bring it to the shop next week or so.
IllusionXBrossard, QC · May 16, 2015#18I just came back from the garage to get the gasket replaced.
I was warned at the dealer that aftermarket gaskets won't fit. Well, I got the one from RockAuto, and its slightly too big.
ExiwolfmanWasaga beach · May 16, 2015#19 Originally Posted by
IllusionX ↑ I just came back from the garage to get the gasket replaced.
I was warned at the dealer that aftermarket gaskets won't fit. Well, I got the one from RockAuto, and its slightly too big.
And they don't last ....use Toyota one
IllusionXBrossard, QC · May 16, 2015#20Its working for now. I will change it next year since the bolts are no longer rusted. I will be able to change it myself.
tmontagueCaledonia Ont. · May 16, 2015#21I noticed the ones I got from RockAuto are not snug like the original one. I still installed mine and noticed no issue or smell on my Yaris. I'll leave it on and in 80,000km i'll replace with an OEM one.
WeeYariGeorgetown, Ontario, Canada · May 16, 2015#22My replacement gasket purchased from Napa. No fitment issues with it.
Sent from my iPhone using Tapatalk
"G"Thread starterChicago · May 17, 2015#23You buy cheap you buy twice. I would never buy a part like this from Rockauto. Furthermore you do not want to heat up the bolt. You heat up the manifold so it expands.
"G"Thread starterChicago · May 18, 2015#24My original gasket lasted 188,000 miles, not bad at all. My initial suspicions were correct. It was the gasket. Here is what was left of it and the bolts that came out. Slow cycles of heat and a steady hand. Thanks for the peeps who confirmed my problem.
Picture lost · s16.postimg.org
Bluevitz-rsOshawa, Ontario, Canada · May 18, 2015#25Good job. You'll probably find you get better mileage now too.