Yarisworld Archive

bumper bracket arms for vis rs bumper

84 posts · 30,624 views · page 2 of 2

Replies continued

WeeYariGeorgetown, Ontario, Canada · May 14, 2015#51
*crickets*
KCALB SIRAYVirginia · May 14, 2015#52
I think you are reading my sentence differently than I wrote it; the grilles are real, not my bumpers.

Originally Posted by WeeYari ↑
Don't know who you bought from but echo_hrs never, ever, ever had fiberglass bumpers. It was always nothing but the real thing for him.
Originally Posted by WeeYari ↑
*crickets*
beakerconyers ga · May 20, 2015#53
I am dying to see the VIS bumper installed!
WeeYariGeorgetown, Ontario, Canada · Jun 2, 2015#54
Where the hell is this car?!?!
enviriCT · Jun 2, 2015#55
maybe it shattered upon painting? 😁😆
IllusionXBrossard, QC · Jun 2, 2015#56
Originally Posted by WeeYari ↑
Don't know who you bought from but echo_hrs never, ever, ever had fiberglass bumpers. It was always nothing but the real thing for him.
I think he did on the orange?
beakerconyers ga · Jun 2, 2015#57
Originally Posted by WeeYari ↑
Where the hell is this car?!?!
I know. I want to order one of these, but was waiting to see how it turned out before I did.
WeeYariGeorgetown, Ontario, Canada · Jun 2, 2015#58
Originally Posted by IllusionX ↑
I think he did on the orange?

Nope.


Sent from my iPhone using Tapatalk
ilikericesavannah, ga · Jun 3, 2015#59
Maybe he had Astroman's Cousin to paint it.. Prob wont see it for a couple of years if thats the case............
WeeYariGeorgetown, Ontario, Canada · Jun 3, 2015#60
😆🤣
AstromanWenatchee, WA · Jun 5, 2015#61
Geeze I hope my cousin didn't paint it too! I got mine back with the new bumper, getting the custom paint next week.

1 attachment not included in this copy

nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Jun 6, 2015#62
Originally Posted by WeeYari ↑
😆🤣
Exactrly. Hilarious!

(and kudos to Astroman for having a sense of humor about this ^^^^^ 👍)
nookandcrannycarS.MontgomeryCnty,TX(HoustonMSA) '07=BayouBlue=300,125miles=OrigOwnr '14=ClassicSilvr=29,059miles · Jun 6, 2015#63
Originally Posted by Astroman ↑
Geeze I hope my cousin didn't paint it too! I got mine back with the new bumper, getting the custom paint next week.
👍 Looking good!

(😳 sorry, thought picture would display here)
WeeYariGeorgetown, Ontario, Canada · Jul 7, 2015#64
Originally Posted by WeeYari ↑
Where the hell is this car?!?!
^ over a month has passed. One last plea for updates, then I'm done.
ezhacker1San Francisco · Jul 7, 2015#65
Originally Posted by Astroman ↑
Geeze I hope my cousin didn't paint it too! I got mine back with the new bumper, getting the custom paint next week.
Originally Posted by enviri ↑
maybe it shattered upon painting? 😁😆
Lol, never again, fiberglass or abs. But i do wish my DAMD lip was more forgiving to driveways like the RS lip. Actually im not sure what materal the DAMD lip is, it is definitely not poly or abs, maybe it is really thick fiberglass.

I intentionally allow the bumper to pop off so that when i fowl on a driveway the bumper will deflect and just pop off the clip rather than the lip taking the force.
Innovative 1Thread starterGlendive, MT · Jul 24, 2015#66
Fresh paint job with new VIS RS fiberglass bumper and Kaminari reverse cowl fiberglass hood finally completed. I noticed the hood gaps were a little off and adjusted it since I took these pics last weekend.

1 attachment not included in this copy

Innovative 1Thread starterGlendive, MT · Jul 24, 2015#67
VIS RS fiberglass bumper and Kaminari hood

1 attachment not included in this copy

Innovative 1Thread starterGlendive, MT · Jul 24, 2015#68
Front shot of my new VIS RS style fiberglass bumper and Kaminari reverse cowl hood custom painted.

1 attachment not included in this copy

Innovative 1Thread starterGlendive, MT · Jul 24, 2015#69
Originally Posted by Innovative 1 ↑
Front shot of my new VIS RS style fiberglass bumper and Kaminari reverse cowl hood custom painted.
I have since fixed the gaps between the hood and the bumper.
FreestylinCalgary, Alberta · Jul 25, 2015#70
Nice.. glad to see you managed to work with the VIS kit!
ezhacker1San Francisco · Jul 25, 2015#71
Wow very nice, any issues with fitment that the shop had to work on? Like the straight edge where the bumper meets the fender.

Im glad it all came together. Loving that reverse cowl hood.
Innovative 1Thread starterGlendive, MT · Jul 25, 2015#72
I had them only paint it for me. I installed the bumper myself to make sure the grill inserts and garnish was installed properly. The fender and bumper gaps were tight. Had to semi force the fit but got them to go.
beakerconyers ga · Jul 25, 2015#73
Looks AWESOME!

Tells us how the factory grill parts worked with the aftermarket bumper?

Also, is that the TRD garnish between the upper and lower grill or is it just painted black?
WeeYariGeorgetown, Ontario, Canada · Jul 25, 2015#74
By the tiny pics on my phone, that looks damn good. You must be thrilled by the transformation.


Sent from my iPhone using Tapatalk
Innovative 1Thread starterGlendive, MT · Jul 26, 2015#75
Grill pieces are held in place by the existing tabs on new bumper. Guessing that they were part of the mold when bumper was formed by vis. They were not precise. Used some small flat washers in between a few of the tabs as a wedge to secure the grill to them. Trd garnish is authentic and came prepainted from japan gunmetal grey. Had body shop spray it same color as cowl section. Held on with pre placed 3M double sided tape and license plate bracket. First time I went to pick it up from body shop I wasn't pleased with the work they did. Told them I wasn't gonna take the car in its condition at that time. The took it back in shop and ended up cutting paint job two more times and got it right. Really thrilled on the final outcome.
Next on the list is a intercooled power enterprise supercharger and 15x7 Enkei RPF1 (Black) Wheels
beakerconyers ga · Jul 26, 2015#76
Originally Posted by Innovative 1 ↑
Grill pieces are held in place by the existing tabs on new bumper. Guessing that they were part of the mold when bumper was formed by vis. They were not precise. Used some small flat washers in between a few of the tabs as a wedge to secure the grill to them. Trd garnish is authentic and came prepainted from japan gunmetal grey. Had body shop spray it same color as cowl section. Held on with pre placed 3M double sided tape and license plate bracket. First time I went to pick it up from body shop I wasn't pleased with the work they did. Told them I wasn't gonna take the car in its condition at that time. The took it back in shop and ended up cutting paint job two more times and got it right. Really thrilled on the final outcome.
Next on the list is a intercooled power enterprise supercharger and 15x7 Enkei RPF1 (Black) Wheels
It turned out really good. I've been looking at getting a JDM bumper cover shipped from Japan for my car, but the cheapest shipping I can find is over $600.00, plus the cost of the bumper. It's good to see that the VIS turned out this well, as it will be well less than 1/2 the cost of sourcing one from Japan.

What license plate holder did you use?
Innovative 1Thread starterGlendive, MT · Jul 28, 2015#77
Went down to car quest and got one of those universal license plate brackets. Turned out good.
Innovative 1Thread starterGlendive, MT · Jul 30, 2015#78
Nope. I just had them paint it. I instaled it at home in the garage. Put in the grill inserts, garnish and license plate mount before I mounted it up. Had to order the shorter bumper brackets so the bumper would clear. Its sucked in more than the original bumper. The splash guard end pieces are different for the "rs" style vis bumper. There are gaps at either side. I'll have to try to find the right ones. The center piece of the splash guard bolts in the usual places.
ezhacker1San Francisco · Jul 31, 2015#79
Yup, the splash guard is nasty gap even on the real JDM.
enviriCT · Aug 1, 2015#80
gaps arent bad at all on 09+ jdm...
Innovative 1Thread starterGlendive, MT · Aug 2, 2015#81
So if i get the jdm rs side pieces for front bumper there will still be a gap?
mr_robotNYC · Nov 6, 2017#82
Originally Posted by Innovative 1 ↑
LH Bracket: 57014-52010
RH Bracket: 57013-52010
Well I ordered the left and right brackets. Are you saying that this wont work Astroman? Read that I need the shorter brackets to move stock crash bar in an and bumper will fit.
Are these the correct part numbers for the shorter brackets?
ACKING_QCQC, Canada · Nov 8, 2017#83
can I ask WHERE did you found those bumpers... and those headlights... also ?! shouldn't there be 2 holes and a GAP when debadging our "trunk" please I wanna know what you did to your trunk, I want it smooth as it can be
mr_robotNYC · Nov 8, 2017#84
I found mine on yahoo auctions Japan. Still waiting for a shipping quote.