Yarisworld Archive

Brake problems?

9 posts · 5,450 views

jari93Original postCanada · Mar 30, 2015#1
Hi guys, I have a 2007 silver yaris sedan. When my car is slowing down and before I am about to stop, a noise comes from my front left (driver side) tires. This noise sounds like something is stuck while rotating with the wheel. However this noise does not appear all the time, only when I have been driving for 30 min or more. I do not know what it could be. Brakes? or something else?

Replies 8

fourbangingfunMA · Mar 30, 2015#2
Originally Posted by jari93 ↑
Hi guys, I have a 2007 silver yaris sedan. When my car is slowing down and before I am about to stop, a noise comes from my front left (driver side) tires. This noise sounds like something is stuck while rotating with the wheel. However this noise does not appear all the time, only when I have been driving for 30 min or more. I do not know what it could be. Brakes? or something else?

Have you taken the caliper apart to see if the pad springs and the pads themselves are properly seated? It Would also be a good opportunity to take the rotor off to look for any pebbles that might be trapped. I posted a thread on here about a small rock that was stuck in my rotor. I Included a video to show the noise.


Sent from my iPhone using Tapatalk
sheekeebutMississauga, GTA, Toronto, ON · Mar 30, 2015#3
You've checked that wheel, right? I would have already jacked up that corner and taken the wheel off to see what's going on. Possibly something stuck to your rotor.


Originally Posted by jari93 ↑
Hi guys, I have a 2007 silver yaris sedan. When my car is slowing down and before I am about to stop, a noise comes from my front left (driver side) tires. This noise sounds like something is stuck while rotating with the wheel. However this noise does not appear all the time, only when I have been driving for 30 min or more. I do not know what it could be. Brakes? or something else?
sheekeebutMississauga, GTA, Toronto, ON · Mar 30, 2015#4
Caliper, sorry, fbf would make more sense there.
jari93Thread starterCanada · Apr 2, 2015#5
Thank you guys I think there is something stuck in there to. I will check asap
WeeYariGeorgetown, Ontario, Canada · Apr 2, 2015#6
I had a grinding a few years back and discovered that one of these clips that slip onto one end of each pad had broken. Piece of it stayed lodged in there and was scraping against the rotor.
PICT0008.JPG
ExiwolfmanWasaga beach · Apr 2, 2015#7
Always check callipers when cold not warm if sized ...
WeeYariGeorgetown, Ontario, Canada · Apr 3, 2015#8
Originally Posted by Exiwolfman ↑
if sized ...
if seized?
ExiwolfmanWasaga beach · Apr 3, 2015#9
Originally Posted by WeeYari ↑
if seized?
Yes ...lol