Yarisworld Archive

CV/axle nut

9 posts · 11,204 views

tmontagueOriginal postCaledonia Ont. · Mar 28, 2015#1
I was cleaning my ABS sensors the other day and came across the axle bolt in the front wheels. It isn't your standard bolt, does anyone know how you would go about removing this? It doesn't have a cotter pin in it but an actual indent in the nut. I'd like to know how to remove this incase my hub bearing start to go or if I even need to remove it for any reason.

Thanks

Replies 8

CTScottUSA, CT · Mar 28, 2015#2
It requires a 30mm socket and a tool for un-denting the part that gets dented against the slot in the axle. I use a tapered, round steel tool that is meant for being pounded to line up bolt holes, etc.
ex-x-fireSheboygan Falls, Wi. · Mar 28, 2015#3
Its a 12 point nut, isn't it?
Harbor Freight recently released a big 1/2 drive 12 point impact socket set. It goes up to 32mm. Their pro sockets are very good for the money.
CTScottUSA, CT · Mar 28, 2015#4
Originally Posted by ex-x-fire ↑
Its a 12 point nut, isn't it?
Harbor Freight recently released a big 1/2 drive 12 point impact socket set. It goes up to 32mm. Their pro sockets are very good for the money.
Correct - 12 pt, 30 mm.
tmontagueThread starterCaledonia Ont. · Mar 29, 2015#5
thanks for the responses guys. I took a look at CanadianTire today and the only 30mm socket they have was a 6 point. Is a 6 point adequate for a 12 point nut, or does it increase the slippage and potential to strip? If a 12 point is highly recommended then I'll keep looking for one.

My second Q is can you just use an impact gun to remove the nut without having the pop out the indented part?
CTScottUSA, CT · Mar 29, 2015#6
Originally Posted by tmontague ↑
thanks for the responses guys. I took a look at CanadianTire today and the only 30mm socket they have was a 6 point. Is a 6 point adequate for a 12 point nut, or does it increase the slippage and potential to strip? If a 12 point is highly recommended then I'll keep looking for one.

My second Q is can you just use an impact gun to remove the nut without having the pop out the indented part?
A six point won't fit on it, and no - you can't just blast the indent with an impact wrench.
Bluevitz-rsOshawa, Ontario, Canada · Mar 30, 2015#7
Go to Princess Auto. I think they'll have one there.
sheekeebutMississauga, GTA, Toronto, ON · Mar 30, 2015#8
That place is like purgatory for the home mechanic. I go in there for one little part, and the whole day passes before my eyes, shopping cart full of stuff that I don't remember getting.

Originally Posted by Bluevitz-rs ↑
Go to Princess Auto. I think they'll have one there.
Bluevitz-rsOshawa, Ontario, Canada · Mar 30, 2015#9
Originally Posted by sheekeebut ↑
That place is like purgatory for the home mechanic. I go in there for one little part, and the whole day passes before my eyes, shopping cart full of stuff that I don't remember getting.
Hahaha yeah I know eh!