CTScottOriginal postUSA, CT · Mar 23, 2015#1This new TSB for "Drive Belt Squeal Noise on Cold Start" was recently added for the 2006-2015 Yaris.
The solution is simply a higher belt tension spec:
Original spec:
New Belt: 539-637 Nm
Used Belt: 245-392 Nm
Updated spec:
New Belt: 750-850 Nm
Used Belt: 375-400 Nm
Attached is a copy of the TSB.
06-15 Yaris Drive Belt SqueakT-SB-0012-15.pdf
Replies 12
jason214Halifax NS · Mar 24, 2015#2Thank you for the information.
CrankyOldManWest Michigan · Mar 24, 2015#3Soon to follow: TSB for premature failure of water pump and alternator bearings. =)
CTScottThread starterUSA, CT · Mar 24, 2015#4 Originally Posted by
CrankyOldMan ↑ Soon to follow: TSB for premature failure of water pump and alternator bearings. =)
BINGO!
bronsinnj · Mar 24, 2015#5Hmm
Interesting. Does this mean anything for someone who bought a new belt and got it tightened twice to stop the noise from somewhere other than a Toyota dealership? My car is outside the 36k and/or 36 month range so I expect this doesn't really affect me.
WeeYariGeorgetown, Ontario, Canada · Mar 24, 2015#7 Originally Posted by
CTScott ↑ Original spec:
New Belt: 539-637 Nm
Used Belt: 245-392 Nm
Updated spec:
New Belt: 750-850 Nm
Used Belt: 375-400 Nm
So, for us driveway mechanics who measure tension by belt deflection, what do these new specs mean?
Interested tidbit in the TSB,
'Do not loosen Bolt B', the bolt that has caused countless people grief. Countless post in here on the issue of stuck, stripped, or broken bolts stemming from tightening or replacing the belt.
WeeYariGeorgetown, Ontario, Canada · Mar 24, 2015#8 Originally Posted by
Tgawe ↑ Interesting. Does this mean anything for someone who bought a new belt and got it tightened twice to stop the noise from somewhere other than a Toyota dealership? My car is outside the 36k and/or 36 month range so I expect this doesn't really affect me.
It's a TSB, so your warranty parameters mean nothing. This is just an advisory to mechanics for trouble shooting a customer reported issue.
woopsLahore, Pakistan. · Mar 24, 2015#9What a bulletin, way to go toyota ;)
mattiupper midwest · Mar 24, 2015#10My car squeals like this sometimes!
fnkngrvIn The Hotbox · Mar 24, 2015#11I can't see the TSB. Is this for both 2 and 3 pulley setups?
ShinareOklahoma City, OK · Mar 24, 2015#12Thanks for the info. Just a week ago I fixed my belt noise by increasing the tension on the belt to as hard as I could pry the alternator over. This makes me feel better about doing that. Heh. I have no way of finding out how tight the tnesion is but I figure its not too bad since I have very little strength. lol
CTScottThread starterUSA, CT · Mar 24, 2015#13 Originally Posted by
fnkngrv ↑ I can't see the TSB. Is this for both 2 and 3 pulley setups?
Yes