i got a 2010 2 door yaris. just got a touchless car wash. saw my roof drip molding moves. is it normal? saw dirt underneath.🤷
Roof drip molding moving
10 posts · 9,763 views
Replies 9
see picsPicture not included in this copy
It should be snapped in and should be difficult to slide around.
thanks just snapped in, no clip or adhesive under the moldings specially in the middle?Originally Posted by CTScott ↑It should be snapped in and should be difficult to slide around.
I am not sure about the 3rd gens. On the 2nd gens there are a few metal clips along the way.
same thing happened to me. Just push em back in
Scott... you wouldn't happen to have the part numbers for these seals would you? *Hate to keep bugging you, but you seem to be the Part Number God* Both mine on my 08 are shrunk up and moving around, the driverside clip rear clip is broken as well.
Parts manager from a local shop got me the following info
Moulding is # 75551-52130 (same part for each side)
CLIPS ARE # 75561-52040
Moulding is # 75551-52130 (same part for each side)
CLIPS ARE # 75561-52040
Correct. By the way, I have a set on hand (just the molding, no the clips ) if you want to save some cash off the $33 each that Toyota charges for them.Originally Posted by MJZ ↑Parts manager from a local shop got me the following info
Moulding is # 75551-52130 (same part for each side)
CLIPS ARE # 75561-52040
Mine fell apart, waxed the groove, doing and looks fine.