Yarisworld Archive

Twin Charging - anyone have the stones?

9 posts · 4,399 views

fnkngrvOriginal postIn The Hotbox · Mar 2, 2015#1
Found this article and shed some light on how it works at least to me so I thought I would share:

Twin Charging

🤘 🤘 🤘

Depending on how things go and if I could figure out space issues I could possibly consider this in a few years.....maybe......pipe dream? lol

Replies 8

CrankyOldManWest Michigan · Mar 2, 2015#2
Yes. It's on the to-do list with the 2ZR-FE upgrade. I've got the blower, might as well get the snail.
fnkngrvThread starterIn The Hotbox · Mar 2, 2015#3
you could get away with a relatively small snail too like the Zage or the one that I had previously.
CrankyOldManWest Michigan · Mar 2, 2015#4
That's kind of where I was headed with that idea. I think the Zage would be a good starting point for proof of concept, if only because it's bolt-on and relatively inexpensive.
fnkngrvThread starterIn The Hotbox · Mar 2, 2015#5
according to the article you can run both chargers 10/10 and get the effect of 30! that is nuts. it would require a well built engine regardless of whether it would be a 1nz or 2zr. Also you would probably want to try to get lower than even the 9:1 ratio in the engine for it to stay together with any longevity.
CrankyOldManWest Michigan · Mar 2, 2015#6
You also need twice the intercooling--sending hot, compressed air into a compressor isn't what you want to do. Plan on having one after each, possibly air-water to conserve space. I've looked into that as well, and it seems pretty straight forward.
fnkngrvThread starterIn The Hotbox · Mar 2, 2015#7
the IC can be pretty small for the SC. You could even stack them.
kounj · Mar 3, 2015#8
My zage snail and most of the kit will be up for sale in the next few months as I am upgrading.
CrankyOldManWest Michigan · Mar 4, 2015#9
Originally Posted by kou ↑
My zage snail and most of the kit will be up for sale in the next few months as I am upgrading.
Saliva intensifies.