Yarisworld Archive

Hatch back Lift Arm Replacement?

14 posts · 8,517 views

wng-2Original postBerwick, Maine · Feb 25, 2015#1
Good morning guys, any suggestions on good sources for hatch back lift arm replacement? The O.E.M.'s on my 08 with 97k miles have failed. I picked some up from NAPA, but they were worse than the O.E.M.'s that failed. I haven't checked with the dealer yet, was just wondering if there was a good affordable alternative. Thanks very much.

Replies 13

Bluevitz-rsOshawa, Ontario, Canada · Feb 25, 2015#2
do a search on here, I believe there was a thread started a while ago about replacements.
wng-2Thread starterBerwick, Maine · Feb 25, 2015#3
I never seem to have much luck searching forums. Just called the dealer, $147 each...🙁
CTScottUSA, CT · Feb 25, 2015#4
Search for "spring shocks". There are a couple threads on here with aftermarket options that are around $30 each.
wng-2Thread starterBerwick, Maine · Feb 26, 2015#5
Originally Posted by CTScott ↑
Search for "spring shocks". There are a couple threads on here with aftermarket options that are around $30 each.
Thanks, a further search led me to the link below. $53.28 for the pair including shipping. I'll let you know how they work. Thanks again!

https://www.liftsupportsdepot.com/
bronsinnj · Feb 26, 2015#6
Originally Posted by wng-2 ↑
I never seem to have much luck searching forums. Just called the dealer, $147 each...🙁


RAPE! 😳
wng-2Thread starterBerwick, Maine · Mar 2, 2015#7
Originally Posted by wng-2 ↑
Thanks, a further search led me to the link below. $53.28 for the pair including shipping. I'll let you know how they work. Thanks again!

https://www.liftsupportsdepot.com/
These shipped fast and work great! Thanks for the help.
bronsinnj · Mar 2, 2015#8
Originally Posted by wng-2 ↑
These shipped fast and work great! Thanks for the help.
Can you give a comment on how the install went? Mine aren't gone but are going. I looked at them and was a little puzzled about what has to be done to change them out.

Thanks!
WeeYariGeorgetown, Ontario, Canada · Mar 2, 2015#9
Originally Posted by bronsin ↑
Can you give a comment on how the install went? Mine aren't gone but are going. I looked at them and was a little puzzled about what has to be done to change them out.

Thanks!
With a small blade flat screw driver, you lift out the little clip on the ends of the strut. The strut then pulls away from the little ball on the body mounts.
wng-2Thread starterBerwick, Maine · Mar 4, 2015#10
Originally Posted by WeeYari ↑
With a small blade flat screw driver, you lift out the little clip on the ends of the strut. The strut then pulls away from the little ball on the body mounts.
To install the new arms, simply push the socket onto the ball. I greased the ball slightly.
bronsinnj · Mar 4, 2015#11
Originally Posted by WeeYari ↑
With a small blade flat screw driver, you lift out the little clip on the ends of the strut. The strut then pulls away from the little ball on the body mounts.
And then the little clip has to be re installed? That looks fiddley.
WeeYariGeorgetown, Ontario, Canada · Mar 4, 2015#12
Originally Posted by bronsin ↑
And then the little clip has to be re installed? That looks fiddley.

No. New struts come with new clips. They will already be in place on the strut ends. Simply 'snap' the strut into place over the mounting ball.

When removing old struts, the retaining clip doesn't have to be completely removed. With your screwdriver, you pry the clip back far enough to release it's hold on the ball.


Sent from my iPhone using Tapatalk
bronsinnj · Mar 4, 2015#13
Cool! I might be able to manage that!🙇
wng-2Thread starterBerwick, Maine · Mar 4, 2015#14
Originally Posted by bronsin ↑
Cool! I might be able to manage that!🙇
Very simple. These arms work great, we shall see how long they last....🙂