Yarisworld Archive

VACUUM hose?

4 posts · 4,645 views

man83Original postGT (502) · Feb 17, 2015#1
Hello everyone!
Can someone help me telling me where are the vacuum hoses?
Yesterday I installed a VAC Gauge, but I made the mistake of confusing the purge valve hose.

I found this picture of another thread, but according read this hose goes to the brake pump.
link: vacuum gauge installation?

Replies 3

man83Thread starterGT (502) · Feb 22, 2015#2
someone?
dragoonmcIllinois · Feb 22, 2015#3
Look for the sensor attached to the intake tube. It has a hose running to it and out of it as well as an electrical connection. That should do you. You can also use the brake booster hose(might be the same hose) or the pcv hose but this will have some oil and moisture in it
man83Thread starterGT (502) · Feb 23, 2015#4
Originally Posted by dragoonmc ↑
Look for the sensor attached to the intake tube. It has a hose running to it and out of it as well as an electrical connection. That should do you. You can also use the brake booster hose(might be the same hose) or the pcv hose but this will have some oil and moisture in it
Thanks dragoonmc, I just made the installation, always in the purge valve system, but before the sensor. Now the gauge runs well.
Previously I had done after the sensor.
IMG_20150222_125720.jpg