Yarisworld Archive

Ambient temperature sensor OBD-II data

16 posts · 9,765 views

spookybathtubOriginal postCalifornia · Feb 11, 2015#1
I've read the Yaris has an ambient temperature sensor in the front bumper. Is there any way to access that information? I have a PLX Kiwi Wifi with DashCommand app, but it shows temperature is not a supported metric.

Replies 15

IllusionXBrossard, QC · Feb 11, 2015#2
The sensor is for the duty cycle of the AC. Apparently,there is another one at the condenser, to prevent freezing.
fnkngrvIn The Hotbox · Feb 11, 2015#3
Originally Posted by IllusionX ↑
The sensor is for the duty cycle of the AC. Apparently,there is another one at the condenser, to prevent freezing.

Yup....doubt that you would be able to access that with anything but the TechStream from Toyota.
CTScottUSA, CT · Feb 11, 2015#4
It can only be read by talking to the AC ECU, so normal OBDII PIDs for ambient temp don't work.
JudgeMAuckland, New Zealand · Feb 21, 2015#5
You can only access that information with Techstream.
dj92mid-western Germany · Feb 22, 2015#6
Nope, If I remember correctly I had been able to read it out using Torque, the right header and the right PID.
I don't remember it exactly, but I took it from a PID set for a Prius of the 2nd gen I think.
IllusionXBrossard, QC · Feb 22, 2015#7
We are talking about a yaris here. The Prius have an ambient temp sensor.
CTScottUSA, CT · Feb 22, 2015#8
So does the Yaris. I display the ambient temperature on my YarGauge (homemade diagnostic tool), but you have to talk to the AC ECU to get the data, rather than to the ECM (so it is not a standard OBDII PID, but rather a manufacturer specific diagnostic PID).
dragoonmcIllinois · Feb 22, 2015#9
Ctscott is it possible to set this up on a Scangauge 2?
CTScottUSA, CT · Feb 22, 2015#10
Originally Posted by dragoonmc ↑
Ctscott is it possible to set this up on a Scangauge 2?
Possibly.
IllusionXBrossard, QC · Feb 22, 2015#11
Originally Posted by CTScott ↑
So does the Yaris. I display the ambient temperature on my YarGauge (homemade diagnostic tool), but you have to talk to the AC ECU to get the data, rather than to the ECM (so it is not a standard OBDII PID, but rather a manufacturer specific diagnostic PID).

Does that mean Toyota uses the same sensor, and get the info from the AC ECU in some cars?
CTScottUSA, CT · Feb 23, 2015#12
Originally Posted by IllusionX ↑
Does that mean Toyota uses the same sensor, and get the info from the AC ECU in some cars?
Yes. But, some (including the 2010+ Yaris) pass that data to the ECM, so that it can report it with a standard OBDII PID.
dragoonmcIllinois · Feb 24, 2015#13
Ctscott please post the pid you used to get the info from the Ac ecu.
CTScottUSA, CT · Feb 25, 2015#14
Originally Posted by dragoonmc ↑
Ctscott please post the pid you used to get the info from the Ac ecu.
2122 is the command, sent to address 07C4.
flgLtdAt my computer · Mar 23, 2015#15
Do you know if the '09 is different than a '10 in this respect? I just replaced my '10 with an '09 and I can't seem to get the Amb temp on my Scan Gauge II anymore???
CTScottUSA, CT · Mar 23, 2015#16
Originally Posted by flgLtd ↑
Do you know if the '09 is different than a '10 in this respect? I just replaced my '10 with an '09 and I can't seem to get the Amb temp on my Scan Gauge II anymore???

As I said in post 12 above - The 2010 and newer Yaris supports it. No prior years do.