yea you guys need a lot more negative camber, Im running -3.5 with much stiffer suspension and the temps are perfect across the tire along with even wear. I use -3.5 with R1R's and Hoosiers. Anything below -3 up front is a waste of an alignment IMO ( If you are trying to be competitive)
Struts vs coilovers
60 posts · 13,668 views · page 2 of 2
Replies continued
If you want a primitive means to get your camber in the ballpark, just look at a photo of your car loaded up in turn. You want to use the whole tire... It should be close to strait (under full load in turn) . This is what -3.5 looks like on my car.
1 attachment not included in this copy
Gangster photo dude. My issue is this is my only car and its dual purpose. For each auto x event I'll put a few hundred miles on the car delivering pizzas to pay for more tires at auto x. I'm trying to be as competitive as possible within my limits and the tough part so far has been finding those limits and taking full advantage. I'll have a good test and tune day on the 1st to see what my current mods are doing and go from there. I'll be buying some rotors to match my hps pads when I get the k&n filter from MI for my oil change. Will probably do transmission oil mt90 too since I'm getting due at 60k hard miles. Will be running my r1rs till they die then getting 205/50/15 r compounds for the new mini phone dials that are coming in the mail next week
I'd love to run a track alignment but I'm trying to be more realistic in how the car is being used
I'd love to run a track alignment but I'm trying to be more realistic in how the car is being used
I don't remember who said this but another member told me -4.5 camber is what he ran to get the best performance. That is super extreme for a street car. One of these days I'll buy a second car and run the yaris track only, but that day hasn't come yet
thanks man! I can understand having to street drive the car. I think when I was daily driving my car a bit over a year ago, I had -2.7 and drove 300 miles or more between events. Tires seems to wear even, it was a good compromise
What toe setting did you run with that camber setting?
The toe setting is what will destroy daily driven tires. I know. I used to run mild camber at about 1.6° but about ⅛" toe out and the inside edge of the tires wore down. I had an alignment and set the toe to 0 and the tires wear evenly now, but turn in isn't as quick. But I also don't track my car anymore.
I'm thinking I'll run a track alignment and then buy tires at the junkyard. $16.50 a tire plus $5 mount and balance from my friend who works at les Schwab. I think this is a good plan but it won't happen till I wear out my current r compounds and but my 205/50/15 s for the new rims. Its good to know what I'm running right now won't be too bad on tires so I can protect my current daily tire investment
I run .05degree in per side, mostly due to road course stuff though. I was fighting stability issues during turn in. However now with aero that might change to running slight tow out, and also because Im setting up my car more for autocross.Originally Posted by Ben_ ↑What toe setting did you run with that camber setting?
Received the mini wheels today, I will be posting on the aftermarket rims thread with all my different setups after the next auto x when I run my r comps. The rims came with tires that have seen better days and I was hoping to have more life in them, but I can't complain.
Will be working on getting a more aggressive alignment soon. A good time would be when I get my new struts if I have money for them. If I don't get the struts I will probably do a change between the next auto x and the one after
Will be working on getting a more aggressive alignment soon. A good time would be when I get my new struts if I have money for them. If I don't get the struts I will probably do a change between the next auto x and the one after