Yarisworld Archive

New Clutch Installation

4 posts · 6,720 views

duendeverdeOriginal postPR · Jan 12, 2015#1
I bought from Amazon a Luk Clutch Kit for my yaris 2010 Sedan (Pressure Plate, Clutch and TOB)

Installed it last saturday and the feeling was great since my last clutch was slipping. I don't know why but today I heard a squeal sound. I thought that it was the serpentine belt but i wasn't

I noticed that If I apply small pressure to the clutch pedal the squeal disappears and also I saw the clutch fork moving (wobbling to be exact)

The mechanic told me that everything was installed correctly. What can it be, the TOB, the clutch fork or the clutch kit

To be more exact, the following youtube link shows a car with the exact problem as mine

https://www.youtube.com/watch?v=wIbE6aPncbk

Replies 3

colj00perth, WA, straya · Jan 12, 2015#2
my car has been doing that since it rolled off the dealers lot. i was told by the mechanic that it was the pressure plate springs.
duendeverdeThread starterPR · Jan 12, 2015#3
Originally Posted by colj00 ↑
my car has been doing that since it rolled off the dealers lot. i was told by the mechanic that it was the pressure plate springs.

Mmmm ok, bad luck for me, the clutch kit was brand new. I was thinking of buying an Aisin Clutch Kit just in case if a clutch part came damage
fnkngrvIn The Hotbox · Jan 19, 2015#4
I am leaning toward the release bearing. I have had 4 of them now through my different clutch setups. It is a dead giveaway for sure if you barely depress the clutch pedal and the sound goes away. Needs proper lubrication during installation otherwise it will dry out and eventually cause premature wear on the assembly.