Yarisworld Archive

seat bolster worn

15 posts · 6,901 views

428CobraJetOriginal postdowntown Houston · Jan 4, 2015#1
My outer driver's seat bolster has worn thru (in addition to the foam getting lumpy there). 09 3 door. 122,000 miles.

🆘What are my options?
Suggestions?
Craig

Replies 14

428CobraJetThread starterdowntown Houston · Jan 5, 2015#2
A complete new drivers seat would be about $1350 (1147.04 plus 200 shipping). Certainly the driver's seat would look and feel like new. Hopefully would still match the patina on other soft goods.
New Katzkin leather installed with slight repairs on bolster would be $900 plus tax (approx975) installed...would feel? Would probably look great.
CTScottUSA, CT · Jan 5, 2015#3
Check car-parts.com and see if there are any used low-mileage ones out there.
428CobraJetThread starterdowntown Houston · Jan 5, 2015#4
Thanks!
What year would match? 09 and 10? Mine is solid blackish.
CTScottUSA, CT · Jan 5, 2015#5
Originally Posted by 428CobraJet ↑
Thanks!
What year would match? 09 and 10? Mine is solid blackish.
09-11 would be a match for yours.
428CobraJetThread starterdowntown Houston · Jan 5, 2015#6
Non S 3 door only?
CTScottUSA, CT · Jan 5, 2015#7
Originally Posted by 428CobraJet ↑
Non S 3 door only?
For driver's side 5 door (4 door htchbk on there) would be fine as well. Must be w/airbag for 09-11.
428CobraJetThread starterdowntown Houston · Jan 5, 2015#8
Thanks!
CoryMWhite Rock BC · Jan 6, 2015#9
May want to visit a local car upholstery shop. May be able to get it re done for less than you think.
428CobraJetThread starterdowntown Houston · Jan 6, 2015#10
Since the upholstery is glued on...im not so sure. Thanks to CTScott...I'm gonna look at some used ones. I'll keep y'all posted.
CoryMWhite Rock BC · Jan 6, 2015#11
It just pulls off and can be re-glued. I've done heated seats on mine that way and looks good. I've also had LOTS of bolsters repaired on work trucks and they usually look just like OE after.
CTScottUSA, CT · Jan 7, 2015#12
Originally Posted by CoryM ↑
It just pulls off and can be re-glued. I've done heated seats on mine that way and looks good. I've also had LOTS of bolsters repaired on work trucks and they usually look just like OE after.
I was initially going to suggest that route for him, but there seems to be quite a few junkyard seats available in Texas for under $150.
428CobraJetThread starterdowntown Houston · Jan 12, 2015#13
Thank you so much gentlemen! 🙇 $85 plus tax off a 2010. Donor car was hit in front relatively minor. Clean insides with doors and glass intact. 6 miles from home! No charge for armrest!!!!!!

Any tricks on the swap due to the airbag?
2015-01-12 14.12.23.jpg2015-01-12 14.20.16.jpg
CTScottUSA, CT · Jan 12, 2015#14
Just disconnect the battery to be safe while doing the swap. Other than that, you scored a hell of a deal.
428CobraJetThread starterdowntown Houston · Jan 13, 2015#15
All done!
Thanks again.
2015-01-13 10.30.01.jpg