Ryze268Original postAntigua & Barbuda · Jan 2, 2015#1Hey guys,
I have a serious problem.
Whenever I launched my car or dump the clutch, the engine bangs against the firewall.
I'm now afraid that I may break something. My friends told me changing the rear engine mount to a solid mount would solve the issue. Another option would be an engine damper however I can't find any for my car.
What do you guys think?
Replies 21
KTSTrinidad and Tobago · Jan 2, 2015#2Your friends have the right idea. It sounds like the mount(s) are busted.
You can purchase a universal tq damper or one from another vehicle and fabricate custom brackets. U can use a piece of pvc piping or paper towel roll to determine where you want to mount the damper and what length damper to purchase. I believe there are 2 different length dampers available.
Ryze268Thread starterAntigua & Barbuda · Jan 3, 2015#3Sounds like a plan, I'll see what we can do
Bluevitz-rsOshawa, Ontario, Canada · Jan 4, 2015#4micro image sells the TRD transmission mount. Might be worth it if your hard on the drivetrain. An engine damper only slows the movement of the engine.
Ryze268Thread starterAntigua & Barbuda · Jan 5, 2015#5 Originally Posted by
Bluevitz-rs ↑ micro image sells the TRD transmission mount. Might be worth it if your hard on the drivetrain. An engine damper only slows the movement of the engine.
Thanks much, could you post a link to it plz?
CrankyOldManWest Michigan · Jan 5, 2015#6Ryze268Thread starterAntigua & Barbuda · Jan 5, 2015#7Thanks much, Looks like I need to do some saving.
KTSTrinidad and Tobago · Jan 5, 2015#8I have an idea that will be a lot cheaper.....don't launch the car or dump the clutch 😁
bronsinnj · Jan 6, 2015#9 Originally Posted by
KTS ↑ I have an idea that will be a lot cheaper.....don't launch the car or dump the clutch 😁
Quite. Especially after replacing broken parts! 🙇
fnkngrvIn The Hotbox · Jan 6, 2015#10Might be mistaken, but I think that I got the last dogbone TRD trans mount that Garm had. He still has the 2 engine mounts. rather than fabricating mounts why not look to get used ones if you don't wanna buy new? Have you checked ToyotaPartsZone.com for OEM?
P.S. Yup, I am still alive and kickin, haha
mario98cPuerto Rico · Jan 6, 2015#11I filled my engine mounts with 3m urethane lol The engine moves but not a lot like when it have the oem mounts. Also there is a little vibration when the car is at idle. For 30 bucks I think is the best you can do. lol
KTSTrinidad and Tobago · Jan 7, 2015#12yup the 3m urethane works good and the vibration is not bad at all. almost no one but me notices the vibration
RagnaCaTVillalba, Puerto Rico · Jan 7, 2015#13I'm going with the 3M this weekend if it doesn"t work engine damper My luanches at the track are bad and burnout also... to much torque
Ryze268Thread starterAntigua & Barbuda · Jan 12, 2015#14 Originally Posted by
mario98c ↑ I filled my engine mounts with 3m urethane lol The engine moves but not a lot like when it have the oem mounts. Also there is a little vibration when the car is at idle. For 30 bucks I think is the best you can do. lol
Did you fill all the mounts or just the one at the back?
mario98cPuerto Rico · Jan 12, 2015#15 Originally Posted by
Ryze268 ↑ Did you fill all the mounts or just the one at the back?
I fill the transmission mount and the back mount also. I have some pictures of the entire process. I post them later.
RagnaCaTVillalba, Puerto Rico · Jan 12, 2015#16Great!!! Love to see pics also
Sent from my iPhone using Tapatalk
mario98cPuerto Rico · Jan 13, 2015#17Sorry for the delay.
This is the urethane that I used.
Picture not included in this copy
To remove the transmission mount you need to remove the battery and the battery bracket. It's easy to remove. You need to put a jack stand to hold the engine and then remove the mount. To remove the back engine mount you don't need a jack stand.
Picture not included in this copy
Picture not included in this copy
Before
Picture not included in this copy
After
Picture not included in this copy
I don't have pictures of the back engine mount but it's much easier to remove that the transmission one. Also you need to let the urethane cure 24 hours.
Ryze268Thread starterAntigua & Barbuda · Jan 13, 2015#18Really appreciate the posts mario
RagnaCaTVillalba, Puerto Rico · Jan 19, 2015#19Working on it today I did only dogbone once and it wasn't efective and the banging of excesive torque is taking a toll...Picture not included in this copy
Sent from my iPhone using Tapatalk
RagnaCaTVillalba, Puerto Rico · Jan 20, 2015#20I put a little bit more on to it has some movement but its pretty stiff,
Lets see how it handles 160 pounds of torque if it fails I'm only left with the option to get a engine damper :(
Picture not included in this copy
Sent from my iPhone using Tapatalk
Bluevitz-rsOshawa, Ontario, Canada · Jan 20, 2015#21give it a few days to really get hard. You shouldn't have any problems with it afterward.
RagnaCaTVillalba, Puerto Rico · Jan 22, 2015#22Yeah it really got Hard if something it wont be that!
Picture not included in this copy
Sent from my iPhone using Tapatalk