dihzenyoOriginal postPHL · Dec 7, 2014#1hi all,
is there a way to increase the stroke of the 2nzfe?
like switching some internals so instead of the 1.3liter 2nzfe 89 hp, swapping some internals to make it a 1.5 liter 109hp 1nzfe?
any suggestions, help, pics, prices, anything is highly appreciated! 👍👍
Replies 8
Jcp123E. Tx · Dec 7, 2014#2As I understand it, it's just a longer throw in the crank? I'd like to go the other way and make a super-frugal 2NZ out of mine...
CTScottUSA, CT · Dec 7, 2014#3With the change is displacement, you would also need to change the ECM or use a piggyback to add or remove fuel, depending on the direction that you go.
Bluevitz-rsOshawa, Ontario, Canada · Dec 7, 2014#4are the ECMs different part numbers?
Wouldn't the MAF just read an increase in airflow and compensate anyway. I read an article of a guy with an MR-S swapping in an 1NZ from the 1ZZ and used the 1ZZ ECM and everything works fine.
dihzenyoThread starterPHL · Dec 8, 2014#5any documentation that this has been done?
CTScottUSA, CT · Dec 8, 2014#6 Originally Posted by
Bluevitz-rs ↑ are the ECMs different part numbers?
Wouldn't the MAF just read an increase in airflow and compensate anyway. I read an article of a guy with an MR-S swapping in an 1NZ from the 1ZZ and used the 1ZZ ECM and everything works fine.
The ECMs are different part numbers. With a 15% difference in cylinder volume, I am not sure that the ECM could properly compensate for the air flow difference.
Ryze268Antigua & Barbuda · Dec 9, 2014#7Just get a 1NZ bottom end with the crank and rods, everything else from the 2nz will work
dihzenyoThread starterPHL · Dec 12, 2014#8its just like you swapped the entire engine from 2nz to 1nz.
sang pengembarajeddah - saudia arabia · Mar 28, 2016#9 Originally Posted by
dihzenyo ↑ hi all,
is there a way to increase the stroke of the 2nzfe?
like switching some internals so instead of the 1.3liter 2nzfe 89 hp, swapping some internals to make it a 1.5 liter 109hp 1nzfe?
any suggestions, help, pics, prices, anything is highly appreciated! 👍👍
I swap the entire engine block by 1nzfe.. Nothing need to be modified.. Working well till now..
Sent from my C6903 using Tapatalk