Eduardo_mtyOriginal postNov 21, 2014#12015 yaris hatchback
What and how should I remove the pieces of the trunk to install the curt 56175 wire converter, to avoid damaging any parts..
how i will connect this wire converert.
Replies 36
ucsmfuvancouver, BC · Nov 21, 2014#2what is this wire converter for ?
Eduardo_mtyThread starterNov 21, 2014#3i iwll use with this, becouse last time when i visited USA, one car "crash" my cargo carrier, and he said "i dont see it"
2 attachments not included in this copy
CTScottUSA, CT · Nov 21, 2014#4To wire up the taillight converter:
Brake: Light Blue (either side)
Left Turn: Yellow (Left Tail Light)
Right Turn: Sky Blue (Right Tail Light)
Tail: Green (either side)
Ground: White/Black (either side)
Eduardo_mtyThread starterNov 21, 2014#5Thank you CTScott, i will need remove all plastics from rear trunk?
Eduardo_mtyThread starterNov 21, 2014#6 Originally Posted by
CTScott ↑ To wire up the taillight converter:
Brake: Light Blue (either side)
Left Turn: Yellow (Left Tail Light)
Right Turn: Sky Blue (Right Tail Light)
Tail: Green (either side)
Ground: White/Black (either side)
i will tap, from left side of the car ?
CTScottUSA, CT · Nov 21, 2014#7 Originally Posted by
Eduardo_mty ↑ i will tap, from left side of the car ?
Either side, but you will need to run one wire over to the opposite side. You should not have to remove all of the plastics. You can open the hatches for access to the lights and then feed the wires down into the spare tire area. For exiting the car, the rubber plug at the bottom of the spare tire well is better than drilling a hole through metal.
428CobraJetdowntown Houston · Nov 22, 2014#8Did you get the trailer hitch to fit your 2015?
Eduardo_mtyThread starterNov 22, 2014#9Was "custom" made.. I upload picture An a moment
Eduardo_mtyThread starterNov 22, 2014#10i live in México, and i cant go to USA before my trip..
a welder man, did my "custom" hitch....
1 attachment not included in this copy
428CobraJetdowntown Houston · Nov 22, 2014#11Beautiful!
Eduardo_mtyThread starterNov 22, 2014#12 Originally Posted by
428CobraJet ↑ Beautiful!
thank you
CTScottUSA, CT · Nov 22, 2014#13That does look good. It is quite low though, so you will have to be careful to not scrape your carrier.
Eduardo_mtyThread starterNov 22, 2014#14The carrier will be modify.. Maybe today i will go for it
Eduardo_mtyThread starterNov 23, 2014#15today i was installed the wire converter, but the right light do not work
see pict.
any help it will be appreciated
pict from left to right
left side, right side (green/yellow wire) in both sides where the light bulb are installed
right side "close up" (both pict)
green wire from left to right... 4 pin connector to "floor" outside the car
last pict.... box controller
8 attachments not included in this copy
CTScottUSA, CT · Nov 23, 2014#16Does just the right turn signal not work, or do none of the functions work on the right side?
Eduardo_mtyThread starterNov 23, 2014#17the tail light in the car work, but in the curt wire dont
CTScottUSA, CT · Nov 23, 2014#18 Originally Posted by
Eduardo_mty ↑ the tail light in the car work, but in the curt wire dont
I figured that was the case, but through the curt, does everything except turn signal work on the right or does nothing work on the right?
Eduardo_mtyThread starterNov 23, 2014#19my english is too short....pictures "talk" more
tail light in curt wire work
stop light in curt wire work
2 attachments not included in this copy
Eduardo_mtyThread starterNov 23, 2014#20tail and stop light pict.
2 attachments not included in this copy
CTScottUSA, CT · Nov 23, 2014#21OK. From the pictures of the right side connector I can't tell which blue lines up with which wire on the top of the connector, but the darker blue (called sky blue) wire is the right turn signal wire.
Eduardo_mtyThread starterNov 23, 2014#22ok, i do you mean, that i will change the tap to the dark blue wire
1 attachment not included in this copy
CTScottUSA, CT · Nov 23, 2014#23Actually I was remembering the blue colors wrong. The lighter blue is "sky blue". So, you want to connect to that wire or to the wire that it connects to on the other side of the connector.
Eduardo_mtyThread starterNov 23, 2014#24CTScott, please see this pict...
1 attachment not included in this copy
CTScottUSA, CT · Nov 23, 2014#25OK. So you are on the correct wire. Make sure your tap splice is actually making contact through the insulation.
Eduardo_mtyThread starterNov 23, 2014#26 Originally Posted by
CTScott ↑ OK. So you are on the correct wire. Make sure your tap splice is actually making contact through the insulation.
tap splice is making contact, i did a "test"connect direct the green wire from wire connector, to a and do not work
1 attachment not included in this copy
CTScottUSA, CT · Nov 23, 2014#27Try switching the left and right input wires on the curt and see if the problem stays on the right. If it does then the curt unit is the problem.
Eduardo_mtyThread starterNov 23, 2014#28Thank you, i will do tomorrow, if not Work... I will need some help to Write to seller...
Eduardo_mtyThread starterNov 23, 2014#29Ctscott i did that you said.. Change the left to right and the curt unit is the problem..
I bought from Amazon And they ship to friend house.
I need help to ask a New one...
With the correct words
CTScottUSA, CT · Nov 23, 2014#30 Originally Posted by
Eduardo_mty ↑ Ctscott i did that you said.. Change the left to right and the curt unit is the problem..
I bought from Amazon And they ship to friend house.
I need help to ask a New one...
With the correct words
"I recently purchased a Curt trailer light converter from you. After installing the unit I found that the right side turn signal does not work. I switched the right and left turn signal wires to the Curt converter and the problem remained on the right side, so the unit is definitely bad."
Eduardo_mtyThread starterNov 23, 2014#31Thank you... Do you think they want the damage unit... Becouse my friend will go in two weeks to USA
CTScottUSA, CT · Nov 23, 2014#32 Originally Posted by
Eduardo_mty ↑ Thank you... Do you think they want the damage unit... Becouse my friend will go in two weeks to USA
Yes. They will probably want the bad one back.
Eduardo_mtyThread starterNov 23, 2014#33is good or bad idea if "we" add this words
"I send this to my cousing in México And he back to USA in two weeks,"
CTScottUSA, CT · Nov 23, 2014#34 Originally Posted by
Eduardo_mty ↑ is good or bad idea if "we" add this words
"I send this to my cousing in México And he back to USA in two weeks,"
I would leave that off.
Eduardo_mtyThread starterNov 23, 2014#35May i buy a universal wire connector or i need the specific wire connector
.
If its universal i will try to find here in México
CTScottUSA, CT · Nov 23, 2014#36 Originally Posted by
Eduardo_mty ↑ May i buy a universal wire connector or i need the specific wire connector
.
If its universal i will try to find here in México
Any universal one will work.
Eduardo_mtyThread starterNov 28, 2014#37Picture... Cargo carrier
What do you think?
1 attachment not included in this copy