Yarisworld Archive

Oil Return on upper oil pan sub assembly

7 posts · 5,288 views

BoostedTRDOriginal postVA · Nov 10, 2014#1
I found this here on the forum and I have a few questions.

how many inches from the bottom of the oil pan assembly to the desired spot for the oil return?

also what size of an fitting is the best for oil return coming out of the oil pan assembly?

My T28 turbo oil feed line came damaged and I need to replace it, Do you guys have any good places to buy oil feed and return lines?

Picture not included in this copy

Replies 6

IllusionXBrossard, QC · Nov 10, 2014#2
uhh.. like this..?

Picture not included in this copy
CTScottUSA, CT · Nov 10, 2014#3
You want to drop the oil it above the oil level, rather than feeding it into the bottom of the oil pan. Where that arrow points to is just about right to be above the oil level (About 3" above the oil pan gasket). I would use a -AN type bulkhead fitting of the proper size for the turbo's output oil fitting.

JEGS and Summit Racing carry oil lines and fittings at reasonable prices.
KTSTrinidad and Tobago · Nov 10, 2014#4
If I remembered I used a 9/16" bit and a 3/8 npt fitting with a 5/8" barb end.

1 attachment not included in this copy

BoostedTRDThread starterVA · Nov 10, 2014#5
Which one do you guys recommend? Does the oil flow better to the oil pan if it is at a certain degree? It will be 3/8 of course just using this pic as a reference.

Picture not included in this copy
KTSTrinidad and Tobago · Nov 10, 2014#6
That is something you might have to determine for yourself. Avoid any kinks in the line to prevent oil from puddling and creating an oil flow restriction.
CTScottUSA, CT · Nov 10, 2014#7
Originally Posted by BoostedTRD ↑
Which one do you guys recommend? Does the oil flow better to the oil pan if it is at a certain degree? It will be 3/8 of course just using this pic as a reference.

Picture not included in this copy
With fluids and particularly viscous ones you want to avoid 90 degree turn, unless that have a wide radius, so either do the 45 or straight.