Eduardo_mtyOriginal postNov 9, 2014#1CTScott, do you have this part? 82819-0D070
i searching on the internet and i cant found it
3 attachments not included in this copy
Replies 18
CTScottUSA, CT · Nov 9, 2014#2That part is actually just considered part of the hatch wiring harness, so you can't purchase it separately from Toyota. I had one but sold it a while back to someone who did the same kind of damage to his.
Eduardo_mtyThread starterNov 9, 2014#3Thank you.... Its the same for others years, to search on yunkyards here in México
CTScottUSA, CT · Nov 9, 2014#4 Originally Posted by
Eduardo_mty ↑ Thank you.... Its the same for others years, to search on yunkyards here in México
That looks identical to 2nd generation ones, so you should be able to use one from 2006 to present.
And, it is easiest to remove it without damage by squeezing it from below (getting above the head liner).
Eduardo_mtyThread starterNov 11, 2014#5Ctscott, this part have a name, i try to ask on Internet yunkyards.
Here in México i can't found it
CTScottUSA, CT · Nov 11, 2014#6 Originally Posted by
Eduardo_mty ↑ Ctscott, this part have a name, i try to ask on Internet yunkyards.
Here in México i can't found it
I have never seen a definite name for the white part, but I would inquire about the hatch wiring harness, as it is part of that assembly.
Eduardo_mtyThread starterNov 12, 2014#7$ 50 usd for this part, is good price... i found one in mexico
Eduardo_mtyThread starterNov 14, 2014#8How i will install the White piece
joellPanama, Central America · Nov 14, 2014#9Isn´t a two piece part like mine (third gen hatchback), looks like you will need to remove the wiring before inserting in the body of the car.Search for diagrams that can give you a better idea.
CTScottUSA, CT · Nov 14, 2014#10If I remember correctly the connector ends fit through the white piece, but it has been a while since I had one in my hands.
ucsmfuvancouver, BC · Dec 11, 2014#11won't the wire fit through this plastic part ?
Eduardo_mtyThread starterDec 11, 2014#12When i did that, i dont know how to remove, i pull from "outside" to inside and broken that piece
Eduardo_mtyThread starterDec 11, 2014#13Look
1 attachment not included in this copy
Eduardo_mtyThread starterDec 11, 2014#14You need to remove a little ceiling to remove this White plastic
ucsmfuvancouver, BC · Dec 11, 2014#15i was able to feed both wires through the plastic piece. I didn't need to remove it.
My question now is how do I put the black grommet back in place ? The bottom part of the grommet which goes over the plastic part.
Thanks
CTScottUSA, CT · Dec 11, 2014#16 Originally Posted by
ucsmfu ↑ i was able to feed both wires through the plastic piece. I didn't need to remove it.
My question now is how do I put the black grommet back in place ? The bottom part of the grommet which goes over the plastic part.
Thanks
You have to remove the white part to get the black part back over it correctly.
ucsmfuvancouver, BC · Dec 11, 2014#17 Originally Posted by
CTScott ↑ You have to remove the white part to get the black part back over it correctly.
what's the best way of removing it properly ?
thanks
CTScottUSA, CT · Dec 11, 2014#18 Originally Posted by
ucsmfu ↑ what's the best way of removing it properly ?
thanks
Pull the rear part of the headliner and release it from below.
ucsmfuvancouver, BC · Dec 12, 2014#19 Originally Posted by
CTScott ↑ Pull the rear part of the headliner and release it from below.
got it out successfully :)