Gpav6Original postUk · Nov 5, 2014#1So I had to reset my ecu after having the engine management light on due to a bar maf sensor which i then replaced and reset the ecu by removing the positive wire that goes to the battery. I removed this for 10 mins after which everything reset including the ecu, job done i thought until now.
I now cannot do nothing with the radio or cd player, although i can change station it does not work, even when i press steering wheel buttons i cannot change volume , there is no volume.
Even when i press eject on the cd player it does not reel it in.
Prior to this everything was working.
Is this a code issue or has the fuse blown?
Edit: its a yaris mk1 2003 t-spirit eith a standard toyota cd / radio system
Replies 11
CTScottUSA, CT · Nov 5, 2014#2The MK1 radios did not have a security code, so check the ACC and DOME fuses.
Gpav6Thread starterUk · Nov 7, 2014#3 Originally Posted by
CTScott ↑ The MK1 radios did not have a security code, so check the ACC and DOME fuses.
Any idea how to check and fix this?
CTScottUSA, CT · Nov 7, 2014#4Were those two fuses OK?
Gpav6Thread starterUk · Nov 7, 2014#5 Originally Posted by
CTScott ↑ Were those two fuses OK?
The acc one under the dash was ok but the dome fuse (under bonnet fusebox) is missing. Any idea what ampage the dome fuse is?
I do not understand , before i removed car battery everything worked.
Please help me.
CTScottUSA, CT · Nov 7, 2014#6 Originally Posted by
Gpav6 ↑ The acc one under the dash was ok but the dome fuse (under bonnet fusebox) is missing. Any idea what ampage the dome fuse is?
I do not understand , before i removed car battery everything worked.
Please help me.
DOME is a 15A fuse. Very strange that it is missing.
Gpav6Thread starterUk · Nov 8, 2014#7 Originally Posted by
CTScott ↑ DOME is a 15A fuse. Very strange that it is missing.
Turns out it is the h-ip main 20a fuse that was missing.
I checked amp and dome and both are ok.
Cd/radio still not working
CTScottUSA, CT · Nov 8, 2014#8 Originally Posted by
Gpav6 ↑ Turns out it is the h-ip main 20a fuse that was missing.
I checked amp and dome and both are ok.
Cd/radio still not working
That makes more sense. Have you tried disconnecting the radio or pulling the dome and ACC fuses for a couple of minutes to try rebooting it again?
Gpav6Thread starterUk · Nov 8, 2014#9 Originally Posted by
CTScott ↑ That makes more sense. Have you tried disconnecting the radio or pulling the dome and ACC fuses for a couple of minutes to try rebooting it again?
Ok thanks for that , i tried taking the fuses out and I even replaced dome fuse but nothing has changed. I will try disconnecting radio tommorrow.
Any other ideas?
CTScottUSA, CT · Nov 8, 2014#10 Originally Posted by
Gpav6 ↑ Ok thanks for that , i tried taking the fuses out and I even replaced dome fuse but nothing has changed. I will try disconnecting radio tommorrow.
Any other ideas?
Beyond that, I'd say that the radio must have an internal problem that occurred during the battery replacement.
Gpav6Thread starterUk · Nov 9, 2014#11 Originally Posted by
CTScott ↑ Beyond that, I'd say that the radio must have an internal problem that occurred during the battery replacement.
Ok I took the cdplayer out and it seems to be a faulty cable at the back, some times when you wiggle it , it works and other times it doesn't.
Here's a pic
Picture not included in this copy Any ideas?
CTScottUSA, CT · Nov 9, 2014#12Look a the pins on the connector to see if they are deformed where the holes are too large. If so, you can reshape them with a tiny screwdriver.