Yarisworld Archive

Aftermarket Cams

10 posts · 5,181 views

BoostedTRDOriginal postVA · Oct 17, 2014#1
Who makes aftermarket cams for 09 Yaris? I've been through a few websites but still cant find a company who makes them.

Replies 9

CTScottUSA, CT · Oct 17, 2014#2
Jun
cali yarisCanoga Park, CA · Oct 17, 2014#3
Jun is overpriced, but I can get them. Much easier to do a regrind locally.
BoostedTRDThread starterVA · Oct 17, 2014#4
Originally Posted by cali yaris ↑
Jun is overpriced, but I can get them. Much easier to do a regrind locally.
How much will that be? Will these cams be perfect for forced induction?
kounj · Oct 17, 2014#5
How much power do you want to make? stock head should be good for 250hp. An lsd would be a better investment.
BoostedTRDThread starterVA · Oct 17, 2014#6
Originally Posted by kou ↑
How much power do you want to make? stock head should be good for 250hp. An lsd would be a better investment.
I want to be in the 300hp I will be also building the bottom end, CP pistons and either crower or carrillo rods. Cometic Headgasket and APR Bolts. Stage 5 racing clutch

My kit has a T28 but I may want to go with a T3 if it fits
kounj · Oct 17, 2014#7
Ptuning.com can make you a nice bottom end if that's what you want. The sleeves on the 1nzfe are thick the motor will hold 300hp as they are. The head flows very well as it is maybe a little port and polish. It's all your own choice just some advice also you have to factor if you get cams to raise the redline power is coming in later as will boost unless you get a smaller turbo. I personally like to keep as much torque down low as possible because I am never really going past 100mph and 10-11psi at 1/3 throttle in any gear makes for some fun times. sorry for the rant.
GOLIATH'SIndonesia · Oct 19, 2014#8
I heard Gude camshaft is good for 1nz....anyone use?
ilikericesavannah, ga · Oct 22, 2014#9
Gude's reputation is questionalble.. There was a big thread on that one
cali yarisCanoga Park, CA · Oct 22, 2014#10
stock head should be good for 250hp.
That's probably true, and it's also pretty easy to get a port and polish done.
That's all I did to my head and made a reliable 350 whp with stock cams, stock valves, just valve springs.

Ptuning does great work; good, professional shop.