Yarisworld Archive

2015 yaris, rear view camera

35 posts · 22,961 views

Eduardo_mtyOriginal postOct 12, 2014#1
I Will tray to install this Chinase Rear view camera (picture 1)

I try to remove this plastic, but i can't.(picture 2)

I found this connector, i think this is for rear view camera
uploadfromtaptalk1413132775204.jpguploadfromtaptalk1413132781657.jpguploadfromtaptalk1413132788915.jpg

Replies 34

Eduardo_mtyThread starterOct 12, 2014#2
I found This
uploadfromtaptalk1413135302351.jpguploadfromtaptalk1413135312238.jpg
Eduardo_mtyThread starterOct 12, 2014#3
And this Picture lost · tapatalk.imageshack.com
Eduardo_mtyThread starterOct 12, 2014#4
Ctscott do you know the part number for this 24 pin connector
uploadfromtaptalk1413165667477.jpg
CTScottUSA, CT · Oct 12, 2014#5
Originally Posted by Eduardo_mty ↑
Ctscott do you know the part number for this 24 pin connector
No. The camera is not documented in the US wiring diagrams, so that connector is not even shown.
CTScottUSA, CT · Oct 12, 2014#6
OK - Found the connector in Europe. It is part of a the installation kit for the camera: PZ457-B0140-00 (which includes the harness and pins and the connector.

The OEM camera is: PZ473-B0140-00
Eduardo_mtyThread starterOct 12, 2014#7
Thank you ctscott, in Do you have the link?...
Eduardo_mtyThread starterOct 12, 2014#9
But no the oem camera
CTScottUSA, CT · Oct 13, 2014#10
Doing a search for the camera part number shows a couple of European sites with it. Try emailing the folks at the link below, as I have always had good luck ordering European Yaris parts from them:

http://genuineserviceparts.com/
CTScottUSA, CT · Oct 13, 2014#12
The second would not be of use unless you were using an aftermarket radio. The first may work, but I am not sure, as the bare camera (86790-0d010) is a unique part number to the Yaris, where many of the other vehicles with cameras share a common part number.
ucsmfuvancouver, BC · Oct 19, 2014#14
Originally Posted by Eduardo_mty ↑
i will buy
http://www.ebay.com/itm/OEM-BACK-UP-...64b626&vxp=mtr

thank you for your help

i will pay the same price for harness, and the shipping .
which reverse camera did you end up buying and using ?

can't you just splice the wire to reverse light signal ?

Thanks
Eduardo_mtyThread starterOct 19, 2014#15
The camera I bought in alibaba.com, 8 months ago

Now i waiting a cable video that bought with autoharnesshouse.com
Eduardo_mtyThread starterNov 9, 2014#16
I got the cable from autoharnesshouse.com and Now i will try to connect.

I connected to the head unit.

I run the cable camera, And + wire, And - wire. To the front of the car.

Brian from autoharnesshouse.com, tell me that i need to use the red wire to power the camera And negative wire i was connected to a screws under the dash

Now i need to connect to reverse wire.
I asked in other post..

And CTScott help me. But i can't found how to connect.
uploadfromtaptalk1415590356095.jpg
Eduardo_mtyThread starterNov 10, 2014#17
one question.

i will take the + wire, from reverse light, i will run from back to front.

one pin on the harness, is the reverse light trigger, then,
i will connect .. + wire from reverse light, + red wire from harness and +wire from pin trigger?

this is correct?
Eduardo_mtyThread starterNov 10, 2014#18
pictures
cable1.jpgharness3.jpg20141108_174352.jpg20141108_174322.jpg
CTScottUSA, CT · Nov 10, 2014#19
Originally Posted by Eduardo_mty ↑
one question.

i will take the + wire, from reverse light, i will run from back to front.

one pin on the harness, is the reverse light trigger, then,
i will connect .. + wire from reverse light, + red wire from harness and +wire from pin trigger?

this is correct?
I would think that the + wire should get ignition switched +12 V power and the reverse wire would connect to the red back-up light wire. Does the documentation explain the pin trigger? I would think that it would be a separate way of turning the camera on (like when you are not going in reverse).
CTScottUSA, CT · Nov 10, 2014#21
Originally Posted by Eduardo_mty ↑
Ah, the reverse trigger is just the opposite of what I was thinking - It is an input to the head unit to tell it that the car is in reverse.
Eduardo_mtyThread starterNov 10, 2014#22
the trigger pin, is the #2 from left to right..opposite the "security clip"
radio-back.jpg
Eduardo_mtyThread starterNov 10, 2014#23
harness position
eduardo_yaris.jpg
Eduardo_mtyThread starterNov 10, 2014#24
I was thinking, i "resolve" my doubt.
the + wire from camera, i will connect to + wire from harness.

the pin trigger from harness to + wire from reverse light.

this is correct?
CTScottUSA, CT · Nov 10, 2014#25
Originally Posted by Eduardo_mty ↑
I was thinking, i "resolve" my doubt.
the + wire from camera, i will connect to + wire from harness.

the pin trigger from harness to + wire from reverse light.

this is correct?
Yes.
Eduardo_mtyThread starterNov 17, 2014#26
doubt about reverse trigger pin..
This is the reverse trigger that i marked with red line ??

see pict..
cable2.jpgcable3.jpg
Eduardo_mtyThread starterNov 23, 2014#27
Today i was installed my rear view camera...
i was an error, with the connectors.. but the seller help me, and show me my error

pic 1 . the harness,
pict 2. my error
pict 3. left foot reverse wire
pict 4. correct pin connector for reverse trigger
pict 5. head unit show the camera image
20141106_192439.jpg20141117_174815.jpg20141123_145021.jpg20141123_145058.jpg20141123_182030.jpg
bronsinnj · Nov 24, 2014#28
I was walking around the block the other day and was almost runover by a Corolla backing out of its driveway. It was about 10 feet from the sidewalk and I didn't see the driver in the car or hear the engine running. As I walked behind it it suddenly started moving towards me. I screamed "Look Out!!!" and the driver stopped just as the rear bumper touched me.

Yeah it had a backup camera in it which the driver didn't look at. Not only that, even if she DID look I was completely out of the camera view walking from the drivers right to left.

So the camera only works if the subject is right behind the vehicle, not moving.

Just a heads up all you people.
hondajtUnited States · Nov 24, 2014#29
^^I highly doubt anyone here is using the backup camera solely for safety. I only use one for parking in tights spots.
Eduardo_mtyThread starterNov 24, 2014#30
Plus the rear view camera, i will install rear back sensor, in 2 weeks
bronsinnj · Nov 24, 2014#31
Originally Posted by hondajt ↑
^^I highly doubt anyone here is using the backup camera solely for safety. I only use one for parking in tights spots.
It shouldn't be used for safety at all! The driver needs to look themselves 180 degrees behind the vehicle when backing up.

Now that I think of it, if the camera is used in tight parking spaces for backing up and the driver doesn't do a 180 before starting to reverse they could run someone over who is moving towards the vehicle but is out of the cameras field of view.

Because of advertising on TV I imagine A LOT of people think of a rear view camera as a safety device.

Which it isn't!
ucsmfuvancouver, BC · Dec 15, 2014#32
so your reverse camera works good ?

here's mine :)

Picture lost · oi58.tinypic.com
yarisbugCanada · Oct 17, 2017#34
Hate to revive an old thread, but i'm doing the same thing here with the exact same wiring harness and am a bit confused as to where/what i tap into to provide power to the camera; would I tap into the reverse light and wire that to the camera's power cable, or actually run a power wire from the camera itself all the way to the front and splice that into the red wire on the harness?

Any help would be greatly appreciated.
Kaotic LazagnaCentral Valley, CA · Oct 17, 2017#35
Originally Posted by yarisbug ↑
Hate to revive an old thread, but i'm doing the same thing here with the exact same wiring harness and am a bit confused as to where/what i tap into to provide power to the camera; would I tap into the reverse light and wire that to the camera's power cable, or actually run a power wire from the camera itself all the way to the front and splice that into the red wire on the harness?

Any help would be greatly appreciated.
For the cam, I tapped into the reverse light wire in the taillight. The trigger for the head unit, I tapped into the red wire in the fuse box.