Yarisworld Archive

subaru strut homebrew coilovers!

12 posts · 2,930 views

hairdresserscarOriginal postErie Pa. · Sep 16, 2014#1
Today i installed gc8 subaru struts, with ebay coilover sleeves, and its a pretty stiff ride with plenty of lows. ill post pictures later with my car cleaned up a bit. note how close the perch is to the mount vs yaris

2 attachments not included in this copy

Replies 11

Flipper_1938Kentucky · Sep 16, 2014#2
How did you come to pick subaru struts?
hairdresserscarThread starterErie Pa. · Sep 16, 2014#3
^
i had a legacy and noticed the perch for the spring was lower and immediately thought moar lower. then i thought maybe a vehicle weighing twice as much might have more dampening so i threw them in!
CrankyOldManWest Michigan · Sep 16, 2014#4
Do the bolts on the new strut line up with the three holes in the strut tower on the Yaris?
hairdresserscarThread starterErie Pa. · Sep 17, 2014#5
iirc
there are only two holes in the yaris but i swapped the top hats over
CrankyOldManWest Michigan · Sep 17, 2014#6
Aah, clever. How hard is it to find the crash/camber bolt spacing on struts?
hairdresserscarThread starterErie Pa. · Sep 17, 2014#7
^
wellllll i used a plasma cutter...
CrankyOldManWest Michigan · Sep 17, 2014#8
Originally Posted by hairdresserscar ↑
^
wellllll i used a plasma cutter...
Oh, well in that case, disregard. 😆
hairdresserscarThread starterErie Pa. · Sep 17, 2014#9
the results! excuse the dirt and cracked out bumper, as a rural paper route is NOT forgiving to a slammed yaris🤣

1 attachment not included in this copy

malibuguyWestminster, MD · Sep 17, 2014#10
Interesting...

I need to find some shorter struts for my tercel...if those fit the Yaris then they are way too big for the terkle spindle
Flipper_1938Kentucky · Sep 23, 2014#11
What coilover kit did you use with the subi struts and yaris top hats?
hairdresserscarThread starterErie Pa. · Sep 26, 2014#12
search coilover sleeve honda on ebay its the yellow ones 55 shipped