Yarisworld Archive

WTB Stock radio wire harness

5 posts · 2,293 views

wsladaritzOriginal postBenton, AR · Sep 1, 2014#1
Specifically I am looking for the D74 plug (20 pins) with at least a few inches of wire. I have the stock radio and I'm trying to get an aux input working. I do not have the stock aux input so if anyone has that I would be willing to buy that as well.

The Reason: Powering stock HU and front speakers with a PC PSU in a home made boom box project for my garage.

Replies 4

CTScottUSA, CT · Sep 1, 2014#2
LOL - There is nothing better than an OEM radio for a garage radio.

I don't have a connector D74 on hand, but I do have the pins for the connector, which can just be heat shrunk to keep them touching the pins next to them.
wsladaritzThread starterBenton, AR · Sep 1, 2014#3
That's a wonderful idea CTScott! I just quit when I saw how close together they were and realized I wasn't going to be able to solder em on.

If I got my research right the pins should be:

Audio Left input: 17
Audio Right input: 15
Ground 16 for audio and 19 to tell it an external device is connected.

Am I missing anything?
CTScottUSA, CT · Sep 1, 2014#4
Originally Posted by wsladaritz ↑
That's a wonderful idea CTScott! I just quit when I saw how close together they were and realized I wasn't going to be able to solder em on.

If I got my research right the pins should be:

Audio Left input: 17
Audio Right input: 15
Ground 16 for audio and 19 to tell it an external device is connected.

Am I missing anything?

Correct - Except 16 is the shield (ground around the audio wires) and 19 doesn't get grounded, but instead gets a 2.2K ohm resistor to ground to enable aux mode.
wsladaritzThread starterBenton, AR · Sep 1, 2014#5
Excellent! Thanks for the assistance!