axiomOriginal postColorado · Aug 18, 2014#1Just finished painting my spoiler and installed it this weekend (along with a MI Lightweight Crank Pulley, Greddy Ti-C Axle Back Exhaust and de-badging the rear). The paint matches perfect, right down to the black sand pearl! (from Automotivetouchup.com)
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Replies 22
CTScottUSA, CT · Aug 18, 2014#2Super great job with the painting. It doesn't look like you have a bit of orange peel.
axiomThread starterColorado · Aug 18, 2014#3 Originally Posted by
CTScott ↑ Super great job with the painting. It doesn't look like you have a bit of orange peel.
Thanks. I primed, sanded, painted, sanded and then wet-sanded it a couple times between clear coats to keep the the finish nice n smooth.
CrankyOldManWest Michigan · Aug 18, 2014#4What did you use to attach it? Tape? I just got one of these from CTScott and I'm not sure I want to drill holes in the bodywork--Michigan uses salt in the winters.
ezhacker1San Francisco · Aug 18, 2014#5I drilled and taped. I figure ill never ever remove it, so making it sure it wont fall off is good
axiomThread starterColorado · Aug 18, 2014#6I used the 3m extreme tape. Ill check it periodically and if it starts to get loose, I'll drill. I've seen on these boards that these cheaper spoilers from ebay can crack. So, before I go super permanent, I want to make sure it holds up.
CrankyOldManWest Michigan · Aug 18, 2014#7Did you run tape the entire length of the spoiler?
axiomThread starterColorado · Aug 18, 2014#8 Originally Posted by
CrankyOldMan ↑ Did you run tape the entire length of the spoiler?
Yes, I cut it into 12 inch strips and did two rows.
ThebigwicksLouisiana · Feb 19, 2015#9How much paint did you use?
jcboyAsia · Feb 19, 2015#10looks really good. and the color-matching, even dark ones aren't easy, but it appears you have.
axiomThread starterColorado · Feb 19, 2015#11 Originally Posted by
Thebigwicks ↑ How much paint did you use?
I used two cans of the matched paint from Automotivetouchup and a can of clear coat.
This particular spoiler is now just sitting in my garage unused as I found a different style I liked better. Anybody need a black sand pearl spoiler?
This is the only pic I have showing a little of the new spoiler, but it was factory painted and bought off ebay from someone who had quite a few of them. It's about the same, just sticks out the back a little further and is a little larger.
Picture not included in this copy1 attachment not included in this copy
TYTYarisUS · Feb 22, 2015#12Sweet car!
Supra_YarisDenton, TX · Feb 22, 2015#13How much will you sell the one you just painted for?
axiomThread starterColorado · Feb 22, 2015#14Let's say $10 plus actual shipping. I'm just looking to get it outta my garage.
MoneyT8USA · Feb 24, 2015#15Nice spoiler. I was wondering about getting one myself. How much did it set you up back including installation?
Supra_YarisDenton, TX · Feb 25, 2015#16 Originally Posted by
axiom ↑ Let's say $10 plus actual shipping. I'm just looking to get it outta my garage.
PM sent!
axiomThread starterColorado · Feb 25, 2015#17 Originally Posted by
MoneyT8 ↑ Nice spoiler. I was wondering about getting one myself. How much did it set you up back including installation?
The newest spoiler was $49 plus $35 shipping on ebay. I drilled and installed it myself, took about 30 minutes.
The
seller is still selling some, but has increased the priced to $149! Now seeing that I paid $49, I got a heck of a deal!
I think I would even pay the $149, it's factory painted, comes with templates and looks really sharp.
brettcipra97Chicago il · Feb 28, 2015#18What spoiler is this? I was looking to buy one, and i really like this one in particular.
ezhacker1San Francisco · Feb 28, 2015#19wow yeah these spoilers are cheap even at 150+shipping. Save time and money on painting. Im wondering if the holes i drilled for the RS type would be covered, or works with this type of spoiler.
axiomThread starterColorado · Feb 28, 2015#20If it helps, here's a different angle for spoiler.
Picture not included in this copy1 attachment not included in this copy
bladesmith6PA · Feb 28, 2015#21i guess we'll find out since i picked one up too and already had the smaller spoiler installed(mine cracked last winter)...
MJZRhode Island · Mar 4, 2015#22 Originally Posted by
axiom ↑ If it helps, here's a different angle for spoiler.
Attachment 55037
Links or a name for that spoiler... that's sick looking! Just the right amount of extension off the roof line!
MJZRhode Island · Apr 2, 2015#23Thanks for the help Axiom! Putting this thing on was hairy! Drilling 1/2 inch holes into soft metal... *SCARY*
But all in it all came out looking fantastic.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy