nikonNUTOriginal postHot Springs, Arkansas · Aug 11, 2014#1Hey all,
So I was coming home early today to get tags on the Yaris. I'm on the bypass, in the center lane, and there lays what looks like a piece of the roller table you see used to move boxes around a factory. There was a nowhere to go as I was pretty much boxed in. Hit the brakes as hard as I can and... WHAM! Got home (short drive) and assessed the damage. No holes or leaking fluids, no new shiny spots under the front of the car, spot a blister on the passengers side front tire and then I head to the back of the car. Right where the main exhaust pipe transitions from the flatish aerofoil shape back to a round shape the pipe is crushed almost flat. I am getting some exhaust flow out the pipe but it isn't much and power is down so... I need suggestions. New pipe? Repair? Aftermarket (is there such a thing?). I appreciate any and all suggestions. Thank you, everyone :)
Replies 11
ExiwolfmanWasaga beach · Aug 11, 2014#2Pics would help
sent from my S4 on Mars
nikonNUTThread starterHot Springs, Arkansas · Aug 11, 2014#3Can do! Sorry they're blurry... The heat shield you see is covering the the gas tank.
Picture lost · i129.photobucket.com
Picture lost · i129.photobucket.com
EDIT: Clearer shots...
ExiwolfmanWasaga beach · Aug 11, 2014#4Wow ...crazy I say get it fixed I would go to a muffler shop have them cut out the part and replace it
sent from my S4 on Mars
nikonNUTThread starterHot Springs, Arkansas · Aug 11, 2014#5Kind of what I was thinking.... Just saw what a factory pipe costs! :faint: Last dumb question. Any chance I could damage my motor driving to the muffler shop? Just don't want to hurt anything else...
CTScottUSA, CT · Aug 11, 2014#6Check the fuel tank too. That looks like the pipe and shield pushed into it a bit.
nikonNUTThread starterHot Springs, Arkansas · Aug 11, 2014#7 Originally Posted by
CTScott ↑ Check the fuel tank too. That looks like the pipe and shield pushed into it a bit.
Scott... A quick inspection reveled no gasoline leaks( liquid or smells anyways). Is that good enough? Thanks for the suggestion :)
CTScottUSA, CT · Aug 11, 2014#8 Originally Posted by
nikonNUT ↑ Scott... A quick inspection reveled no gasoline leaks( liquid or smells anyways). Is that good enough? Thanks for the suggestion :)
With the tank being plastic, I would still take a peek behind the shield. If it was damaged, it may not be leaking now, but may eventually do so. The tank is pretty tough, so I don't think you will find any damage, but it is worth looking.
nikonNUTThread starterHot Springs, Arkansas · Aug 11, 2014#9 Originally Posted by
CTScott ↑ With the tank being plastic, I would still take a peek behind the shield. If it was damaged, it may not be leaking now, but may eventually do so. The tank is pretty tough, so I don't think you will find any damage, but it is worth looking.
10-4! I'll check it when they drop the pipe to fix it. Not going to drive it until I get the pipe fixed this weekend so I'm in the van...
nikonNUTThread starterHot Springs, Arkansas · Aug 11, 2014#10So I know it's an fix is easy but will a new pipe (Looking at a Walker Ultra Direct Fit Converter) do anything for my powertrain warranty? Just curious and covering my butt!
malibuguyWestminster, MD · Aug 11, 2014#11I can make you a new piece in proper 409ss...just needs to be welded in
nikonNUTThread starterHot Springs, Arkansas · Aug 11, 2014#12 Originally Posted by
malibuguy ↑ I can make you a new piece in proper 409ss...just needs to be welded in
Is the original system SS? That would require TIG welding and I'm not sure I'll find that in this part of the world... I'm not in to the know on these things so I have to ask :)