Yarisworld Archive

Looking for an aftermarket exhaust that isn't much louder than stock!

17 posts · 4,627 views

firebird1999usOriginal postGeorgia · Aug 6, 2014#1
The stock muffler looks nasty and I hate the crappy little tail pipe. I daily drive the car and don't want to annoy the neighbors...

I came across the Tanabe Medallion Touring and it seems to be on the quieter side of aftermarket mufflers. The youtoube clips make it sound just a bit louder than stock but smoother. What else is out there that's comparable and isn't a full on can of angry bees?

Replies 16

IllusionXBrossard, QC · Aug 6, 2014#2
Install a 4" muffler tip?
firebird1999usThread starterGeorgia · Aug 6, 2014#3
^^^Want to ditch the rusty muffler too and am fine with a touch louder and smoother. So that's my criteria;)
KCALB SIRAYVirginia · Aug 6, 2014#4
I have a Blitz Nur Spec S. Quiet, smooth and throaty when laid into but not loud.
kounj · Aug 6, 2014#5
Dynamax super turbo muffler.
RakinBangladesh · Aug 6, 2014#6
How much louder are Magnaflow chambered mufflers over stock?
ivanstepulchicago · Aug 7, 2014#7
rock auto axle back
tooterLos Angeles · Aug 7, 2014#8
At only $50, the price is right. 🙂

Picture not included in this copy

And you could always add a custom tip to it.

Greg
firebird1999usThread starterGeorgia · Aug 11, 2014#9
Went with Fujitsubo Wagolis I was able to find used in excellent condition for a good price from a fellow forumite😎
crazylegsWinnipeg, canada · Aug 12, 2014#10
Originally Posted by tooter ↑
At only $50, the price is right. 🙂

Picture not included in this copy

And you could always add a custom tip to it.

Greg
what's that thing sound like? and how big is the pipe? when i told the wife i might mod my new car just so i would have some level of pride in the little turd here first concern ws to make sure i didn't make it louder lol
IllusionXBrossard, QC · Aug 12, 2014#11
Originally Posted by crazylegs ↑
what's that thing sound like? and how big is the pipe? when i told the wife i might mod my new car just so i would have some level of pride in the little turd here first concern ws to make sure i didn't make it louder lol

LOL that one is spec'd the same as OEM.
crazylegsWinnipeg, canada · Aug 12, 2014#12
Ahh lol
firebird1999usThread starterGeorgia · Aug 13, 2014#13
Anyone have any suggestions on muffler hangers? I know the exhaust I bought is very snug and can rub the stock oem bumper... I was thinking about swapping out the hangers with the ones micro image sells but wasn't sure on the spacing I needed to go with?

http://shop.microimageonline.com/Ure...H-urethane.htm

What are the stock muffler hanger dimensions so I have a point of comparison?
ezhacker1San Francisco · Aug 13, 2014#14
I measured a stock exhaust hanger for you. With no weight pulling on it, it measures 27mm from the center of two holes. And the holes measure just about 20mm.
firebird1999usThread starterGeorgia · Aug 14, 2014#15
Direct from Connecticut!

Picture not included in this copy

👍
tooterLos Angeles · Aug 15, 2014#16
Oooo... nice. 🙂

It should be extra deep with that longer pipe looping around from the back of the muffler.


Greg
malibuguyWestminster, MD · Aug 15, 2014#17
You could bend that last hanger rod a smidge to drop the tip to clear the bumper