....for 5-6 days while the wheels are getting done?
Any suggestions?🤷
Any suggestions?🤷
12 posts · 3,214 views
Yeah that's what I was thinking - cinder blocks or like deck piers seem like a much more stable option. What would be the best placements for them under the car? I'll consult my manual when I get out to the car... just curious if there are any spots anyone would recommend?Originally Posted by Betrivent ↑I personally don't feel comfortable leaving my car on weenie little jack stands for that long. I'd find some large pieces of wood or cinder block, pad them, and then lower the car onto them. They're much more stable than just jack stands.
THISOriginally Posted by CTScott ↑You should not use cinder blocks, as they are not designed for the psi load of a vehicle and can fail. 4 jack stands at their lowest setting would be fine if the car is on a level surface. You can slide some blocks under the car as a backup for the stands, but the stands should be supporting the load.
1 attachment not included in this copy
Jack stands are made for that purpose if positioned in the proper resting points on the car. Also they need to have proper weight rating and let's face it, the car weighs 2400lbs and one jack stand the smallest usually hold 1 ton each. I have three snow cats up on jack stands at work, they weigh in stripped down summer mode at 4.5-5 tons. Their all on jack stands till October.Originally Posted by Betrivent ↑I personally don't feel comfortable leaving my car on weenie little jack stands for that long. I'd find some large pieces of wood or cinder block, pad them, and then lower the car onto them. They're much more stable than just jack stands.
Tremendously helpful! Thanks!😳Originally Posted by yarisugi ↑I usually place the 4 jack stands in these locations.
Your floor must be level.