Yarisworld Archive

Throttle Body Swap Fail, help needed

44 posts · 17,726 views

Ryze268Original postAntigua & Barbuda · Jun 26, 2014#1
Hey guys,

I have a 1300cc 2NZ-FE with a tiny 3 bolt throttle body. I recently attempted to upgrade it to a 51mm TB from a 1.8 7AFE corolla engine.

Throttle Body Swap

Unfortunately it didn't fit, the vacuum point didn't line up and the stock bolts are too short 👎.

My next attempt to upgrade the throttle body relies on one you awesome fellas on the forums.

The stock US Yaris intake manifold uses 4 bolt throttle bodies, it should also mount directly to my engine.

I would like to know if anyone would be willing to sell me the stock intake manifold.

It would be greatly appreciated.

-Justin

Replies 43

tooterLos Angeles · Jun 26, 2014#2
Hey Justin,

Sorry, man... 🙁
My CNC engineer had told me two months for a throttle body adaptor, but now he isn't available to do any of my tooter stuff. He's totally occupied working on really big projects now so I'm out of luck.

That's a better idea just to get a stock intake manifold. It would be way cheaper than an adaptor. 🙂

Greg
Ryze268Thread starterAntigua & Barbuda · Jun 26, 2014#3
Its all good Greg, trial and error is key to moving forward.

The hardest part will be finding a used manifold, I haven't seen any on eBay.
Bluevitz-rsOshawa, Ontario, Canada · Jun 27, 2014#4
So as per your other thread, we said the 1ZZ throttle body works and you get one from a 7AFE 😕

Um, why?
IllusionXBrossard, QC · Jun 27, 2014#5
? OP have a 2002, which have a cabled TB.
Bluevitz-rsOshawa, Ontario, Canada · Jun 27, 2014#6
I have a 2005, which also has a cable TB and so does the corolla before '03 with 1ZZ
IllusionXBrossard, QC · Jun 27, 2014#7
OH.. interesting, cuz i kept reading about 1zz DBW TB...
Bluevitz-rsOshawa, Ontario, Canada · Jun 27, 2014#8
Just like the 1NZ went from cable to wires, as so did the 1ZZ.
mr_milesPortland, OR · Jun 27, 2014#9
I might be able to get my hands on a stock intake manifold for you. I had an extra and a friend was going to use it on his XB, but he never did. I'll ask him if he still has it.
Ryze268Thread starterAntigua & Barbuda · Jun 27, 2014#10
Originally Posted by Bluevitz-rs ↑
So as per your other thread, we said the 1ZZ throttle body works and you get one from a 7AFE 😕

Um, why?
Also in that same thread, we discussed that my stock throttle body is 3 bolt while a 1zz throttle body is 4 bolt and wouldn't work. The 7AFE trottle body was the largest 3 bolt I could find.

Originally Posted by mr_miles ↑
I might be able to get my hands on a stock intake manifold for you. I had an extra and a friend was going to use it on his XB, but he never did. I'll ask him if he still has it.
Thanks much, I'd really appreciate it
Ryze268Thread starterAntigua & Barbuda · Jun 28, 2014#12
Originally Posted by Bluevitz-rs ↑
http://www.ebay.com/itm/351087676377


Sent from my iPod Touch
Sorry but that looks exactly like the one I have which didn't fit, I'll post some pictures when I get a chance
Ryze268Thread starterAntigua & Barbuda · Jun 29, 2014#14
Thanks, it seems I have the 1zz throttle body after all but as suggested in that thread, I'll have to do some modding.

Thanks
Bluevitz-rsOshawa, Ontario, Canada · Jul 25, 2014#15
did you get this working?
Ryze268Thread starterAntigua & Barbuda · Aug 28, 2014#16
Originally Posted by Bluevitz-rs ↑
did you get this working?
Sadly I didn't, got some longer bolts, made the sandwich plate, installed everything and had a massive vacuum leak between the intake manifold and the tb.

I don't know but it seems the 2NZ-FE manifold is way smaller 🤷. I don't even think this mod makes sense on the stock manifold as the entry point on the manifold itself is about 35mm 👎.

I'm going to try and source a 1NZ intake manifold or port out the stock one I have.

Trial and error is necessary, hopefully I'm helping someone who might attempt this as well
tooterLos Angeles · Aug 29, 2014#17
Originally Posted by Ryze268 ↑
Sadly I didn't, got some longer bolts, made the sandwich plate, installed everything and had a massive vacuum leak between the intake manifold and the tb.

I don't know but it seems the 2NZ-FE manifold is way smaller 🤷. I don't even think this mod makes sense on the stock manifold as the entry point on the manifold itself is about 35mm 👎.

I'm going to try and source a 1NZ intake manifold or port out the stock one I have.

Trial and error is necessary, hopefully I'm helping someone who might attempt this as well
There are always challenges to adapting things to an unintended purpose. A 2NZ FE intake manifold is on ebay for $118. It includes free domestic shipping so that would offset some of the cost to ship where you are.

Greg
CrankyOldManWest Michigan · Aug 29, 2014#18
Originally Posted by Ryze268 ↑
I don't know but it seems the 2NZ-FE manifold is way smaller 🤷. I don't even think this mod makes sense on the stock manifold as the entry point on the manifold itself is about 35mm 👎.
...
Trial and error is necessary, hopefully I'm helping someone who might attempt this as well
I reached a similar conclusion about the 1ZZ throttle body on the Blitz supercharger: the hole in the mounting face on the intake tube was the diameter of the stock TB, so I had to make a custom adapter that used the larger gasket, then connect the adapter with silicone couplers to a different version of the Blitz intake tube. Even if the original Blitz intake tube wouldn't have leaked, there would be very little HP gain because of the small tube inner diameter.

It took almost a year (on the calendar) to get all of the custom parts purchased and fabricated, and three separate tries to machine the adapter. I could repeat the process in about a week if I needed to, but the first attempt always takes me a long time. The next change will be to find and remove the new bottleneck, but that's probably going to require custom fabrication of cast or welded parts.

2 attachments not included in this copy

Bluevitz-rsOshawa, Ontario, Canada · Aug 29, 2014#19
Maybe just an upgrade to a 1NZ manifold and throttle body might be all the upgrade you need. It would make sense that the 2NZ TB is smaller than the 1NZ.


Sent from my iPod Touch
tooterLos Angeles · Aug 29, 2014#20
That's an excellent suggestion. 🙂
An issue would be converting from cable to drive by wire. If I had a cable, I'd stick with it. The throttle response is so much better than electronic controls.

Greg
Bluevitz-rsOshawa, Ontario, Canada · Aug 29, 2014#21
Originally Posted by tooter ↑
That's an excellent suggestion. 🙂
An issue would be converting from cable to drive by wire. If I had a cable, I'd stick with it. The throttle response is so much better than electronic controls.

Greg
Why would he convert to drive by wire?
Ryze268Thread starterAntigua & Barbuda · Aug 29, 2014#22
Sounds good, still trying to source a 1NZ intake manifold. How far off is a 2ZZ intake manifold in terms on bolting up to our NZ engines?
tooterLos Angeles · Aug 30, 2014#23
Originally Posted by Bluevitz-rs ↑
Why would he convert to drive by wire?
Actually he wouldn't if Toyota makes 4 bolt cable operated throttle bodies. I wasn't aware they did, but I could always be wrong.

Greg
CrankyOldManWest Michigan · Aug 30, 2014#24
The TB on my 1st gen Sienna was a 4-bolt cable style. I think I've seen some in the junkyard before. No idea if they're the same bolt pattern, and I'm sure they're HUGE compared to the one he already has.
Bluevitz-rsOshawa, Ontario, Canada · Aug 30, 2014#25
Originally Posted by tooter ↑
Actually he wouldn't if Toyota makes 4 bolt cable operated throttle bodies. I wasn't aware they did, but I could always be wrong.

Greg

Re read the first post.


Sent from my iPod Touch
CrankyOldManWest Michigan · Aug 30, 2014#26
Crap. Now that we've completely derailed the thread, perhaps we can figure out if a 1NZ intake manifold would work?
Ryze268Thread starterAntigua & Barbuda · Aug 31, 2014#27
I'm sure it will, I just need to find one first.

How far off are the inlet ports between an 2zz manifold & a NZ engine, Do you think an adapter would make sense?
Bluevitz-rsOshawa, Ontario, Canada · Aug 31, 2014#28
A 2ZZ manifold will not fit a 1NZ or 2NZ. It's ports for one are probably close to twice the size and is designed for an engine with an 8000+ RPM redline.


Sent from my iPod Touch
fnkngrvIn The Hotbox · Aug 31, 2014#29
1nz intake manifolds can be found easily. if anything ypu can find them all the time on facebook groups with folks from PTR on them.
Ryze268Thread starterAntigua & Barbuda · Aug 31, 2014#30
Originally Posted by Bluevitz-rs ↑
A 2ZZ manifold will not fit a 1NZ or 2NZ. It's ports for one are probably close to twice the size and is designed for an engine with an 8000+ RPM redline.


Sent from my iPod Touch
Good thing I asked before I bought one.

Originally Posted by fnkngrv ↑
1nz intake manifolds can be found easily. if anything ypu can find them all the time on facebook groups with folks from PTR on them.
Find me for cheap and I'll love you forever 😆
fnkngrvIn The Hotbox · Aug 31, 2014#31
Originally Posted by Ryze268 ↑
Good thing I asked before I bought one.



Find me for cheap and I'll love you forever 😆
What do you consider cheap? You do realize that you are saying this in a Yaris community so in my book cheap is very relative....seems like expensive here is cheap elsewhere 👍
Ryze268Thread starterAntigua & Barbuda · Aug 31, 2014#32
Originally Posted by fnkngrv ↑
What do you consider cheap? You do realize that you are saying this in a Yaris community so in my book cheap is very relative....seems like expensive here is cheap elsewhere 👍
A new one is $100 on ebay so $50 for a used one seems reasonable
fnkngrvIn The Hotbox · Sep 3, 2014#33
I can sell you my stock intake for 50 plus shipping. only thing is it wouldn't ship for a week due to business travel.
Ryze268Thread starterAntigua & Barbuda · Sep 3, 2014#34
Originally Posted by fnkngrv ↑
I can sell you my stock intake for 50 plus shipping. only thing is it wouldn't ship for a week due to business travel.
Just PM me when you get back 👍
Ryze268Thread starterAntigua & Barbuda · Oct 29, 2014#35
Originally Posted by Bluevitz-rs ↑
did you get this working?
I finally got around to doing the swap (3 bolt cable TB) yesterday, here is what I discovered;

The 1ZZ TB Requires longer bolts

A special 'gasket' had to be made

The Throttle Cable is it's stock position is too short

The car idles EXTREMELY high, minimum of 2000 RPM > http://youtu.be/XTNK8QxzM08

I'm still troubleshooting, hopefully I'll get it sorted out.
Bluevitz-rsOshawa, Ontario, Canada · Oct 29, 2014#36
You'll need to back the idle adjuster screw off a bit. It's set to idle a 1.8L.


Sent from my iPod Touch
Ryze268Thread starterAntigua & Barbuda · Oct 29, 2014#37
Originally Posted by Bluevitz-rs ↑
You'll need to back the idle adjuster screw off a bit. It's set to idle a 1.8L.


Sent from my iPod Touch
I did, it's completely backed out
Bluevitz-rsOshawa, Ontario, Canada · Oct 29, 2014#38
You must have a vacuum leak somewhere then.


Sent from my iPod Touch
Ryze268Thread starterAntigua & Barbuda · Oct 29, 2014#39
Originally Posted by Bluevitz-rs ↑
You must have a vacuum leak somewhere then.


Sent from my iPod Touch
Yes, I'll make a fresh gasket tomorrow.

Something I noticed is that my rev limit increased. It's topping out at 6700 rpm now, Not sure how that happened.

Regarding the cable being too short, I think this will have to be my solution;

Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Oct 29, 2014#40
Did you port match the intake manifold.


Sent from my iPod Touch
Ryze268Thread starterAntigua & Barbuda · Oct 30, 2014#41
Originally Posted by Bluevitz-rs ↑
Did you port match the intake manifold.


Sent from my iPod Touch
Yes I did, when I took it for a spin the engine felt more responsive. The hesitation I had with the smaller TB was no longer there.

I made a new gasket and it still wouldn't idle below 1500 rpm, I grew frustrated and put back on the stock TB.

I'm going to leave it to continue my turbo build.

I'll revisit this swap when I figure out where the leak is coming from.
Bluevitz-rsOshawa, Ontario, Canada · Oct 31, 2014#42
It could be the idle air speed controller.

I know the bypass port look very different between the two throttle bodies.


Sent from my iPod Touch
Bluevitz-rsOshawa, Ontario, Canada · Oct 31, 2014#43
If they can be swapped between the two, maybe that's the problem.


Sent from my iPod Touch
Ryze268Thread starterAntigua & Barbuda · Oct 31, 2014#44
Originally Posted by Bluevitz-rs ↑
If they can be swapped between the two, maybe that's the problem.


Sent from my iPod Touch
Is that the sensor which is on the side with the coolant lines?