Hey guys maybe a stupid question, but has anyone else straight piped from axle back?
Straight pipe?
30 posts · 11,068 views
Replies 29
I have... :) sound = awesome :) but it's leaking a bit because the company who installed it were noobs... so I'm going to get a full stainless steel straight pipe from cat to exhaust :)
ha Is it bad on the motor?
Well you have the Nitto exhaust from axle back. I wanted to get rid of my muffler and just do a straight pipe.
I've heard that if you take out the rear resonator (just past the cat) that it sounds like a can of bees. I don't know that for a fact or if they even put those on the yarii in the Netherlands.
I have a 2" exhaust from the resonator back (mandrel bent) with a glass packed muffler. Sounds good and makes power.
I have a 2" exhaust from the resonator back (mandrel bent) with a glass packed muffler. Sounds good and makes power.
Nope! Not one bit.Originally Posted by FlushYaris ↑ha Is it bad on the motor?
Sounds nasty and PISSED OFF! Love it....
Has no impact on the motor whatsoever. I have headerback straight pipe, both resonators deleted, 2.25" with just a muffler before the exit. Sounds pretty beastly. Nice low growl.
I now have a leak too that causes some rattling sounds but thats from scraping the crap out of it on the ground all day lol
I now have a leak too that causes some rattling sounds but thats from scraping the crap out of it on the ground all day lol
It doesnt sound bad...but a little farty. If you want a loud, beefy tone...put a chambered muffler on it like the flowmaster 10 or 40 series. I really liked having my 40 series on my car. But since redone the whole exhaust...again now using a Maggie with a FR-S resonator. Sounds awesome.
Sound clip?Originally Posted by malibuguy ↑It doesnt sound bad...but a little farty. If you want a loud, beefy tone...put a chambered muffler on it like the flowmaster 10 or 40 series. I really liked having my 40 series on my car. But since redone the whole exhaust...again now using a Maggie with a FR-S resonator. Sounds awesome.
Phil you should put up a video!
What if I deleted just the first resonator? Looking for more sound and a possible few horses for cheap.
Sent from my iPod touch using Tapatalk
Sent from my iPod touch using Tapatalk
If you remove the first resonator, it will sound more tin can and resonate through the floor. Gains not really.Originally Posted by BobTheYaris ↑What if I deleted just the first resonator? Looking for more sound and a possible few horses for cheap.
Sent from my iPod touch using Tapatalk
Doing only the exhaust will net you nothing noticeable. It is all in your head. There is no "cheap" way to free up hp in such a car. It would take a combo of IHE to really make any difference.
sent from my m-o-b-i-l-e
sent from my m-o-b-i-l-e
On the echo the single most noticeable power free-re-up-er was the AEM CAI. Then the Borla axle back, then the header.
Sent from my iPod Touch
Sent from my iPod Touch
All of which aren't cheap when it comes down to what they net. The 1nz is so anemic stock there really isn't a cheap way to add power unless you get a smokin deal on a used s/c..Originally Posted by Bluevitz-rs ↑On the echo the single most noticeable power free-re-up-er was the AEM CAI. Then the Borla axle back, then the header.
Sent from my iPod Touch
sent from my m-o-b-i-l-e
Originally Posted by fnkngrv ↑Doing only the exhaust will net you nothing noticeable. It is all in your head. There is no "cheap" way to free up hp in such a car. It would take a combo of IHE to really make any difference.
sent from my m-o-b-i-l-e
This. I noticed small gains with each but all together I've noticed decent power considering my platform but I've spent over 2k just in bolt ons/breathing cycle mods.Originally Posted by fnkngrv ↑All of which aren't cheap when it comes down to what they net. The 1nz is so anemic stock there really isn't a cheap way to add power unless you get a smokin deal on a used s/c..
sent from my m-o-b-i-l-e
@FlushYaris I'll get you a vid man
1.5" stainless steel tubing from turbo back with reso and cat delete to DC Sports axle back muffler.
New Exhaust
New Exhaust
You mean 2.5" correct?Originally Posted by yariSB86 ↑1.5" stainless steel tubing from turbo back with reso and cat delete to DC Sports axle back muffler.
New Exhaust
sent from my m-o-b-i-l-e
Yes, sorry. 2.5" piping. Failed to reread my post.Originally Posted by fnkngrv ↑You mean 2.5" correct?
sent from my m-o-b-i-l-e
Stock piping is 2.25". I just went a little bigger with 2.5".
Haha....could you just imagine 1.5"? O_oOriginally Posted by yariSB86 ↑Yes, sorry. 2.5" piping. Failed to reread my post.
Stock piping is 2.25". I just went a little bigger with 2.5".
sent from my m-o-b-i-l-e
lol yeah, super restricted.
Be like seeing Sylvester in the scene with the detergent and straw...lmao
sent from my m-o-b-i-l-e
sent from my m-o-b-i-l-e
I don't bother doing half ass jobs, not worth it. I replace from one end to the other, mandrel bend only. Here in Canada if you remove you Catalytic converter and do get pulled over, your sent to inspection. And in Quebec it's a 72hr ticket to get a full vehicle inspection. Not worth it.
This year their cracking down on noise level and actually verifying decibel levels. :/
This year their cracking down on noise level and actually verifying decibel levels. :/
yes! straight 2.5 from cat back! https://www.facebook.com/photo.php?v=10201694607914862
2.25 from resonator or after resonator? how dose it sounds like? deeper or lounder sounds? I am plan do the same but wanna get more infor first. thx!Originally Posted by yariSB86 ↑Yes, sorry. 2.5" piping. Failed to reread my post.
Stock piping is 2.25". I just went a little bigger with 2.5".
stock was 1.75"-2" iirc
I know that I am boosted and that changes things somewhat, but here is a video of me at launch with a high flow cat 2.5" all the way to a Magnaflow muffler:
https://www.youtube.com/watch?v=mIQJrnZWxHY
If you try to mentally separate the turbo sound you can see that it does make the sound somewhat lower.
https://www.youtube.com/watch?v=mIQJrnZWxHY
If you try to mentally separate the turbo sound you can see that it does make the sound somewhat lower.
Nice man!
On may 13th im going to get my straight pipe redone... because now it's leaking everywhere because of half ass work... going for a 50mm full stainless steel straightpipe from cat till exhaust!! not going bigger than 50mm because I only have the 1.0 litre engine
On may 13th im going to get my straight pipe redone... because now it's leaking everywhere because of half ass work... going for a 50mm full stainless steel straightpipe from cat till exhaust!! not going bigger than 50mm because I only have the 1.0 litre engine
I might try it just for fun on my 07 sedan. I will use a exhaust clamp and call it a day haha
Will this fit?
http://shop.advanceautoparts.com/buy...tml#fragment-2
Will this fit?
http://shop.advanceautoparts.com/buy...tml#fragment-2