vaironlOriginal post-- · Mar 14, 2014#1Hey Everyone,
There are almost no car meets going on around here and I just keep wondering, if it’s not private, what are you guys doing?
I myself have been struggling over a couple of difficult college courses (astronomy, calculus). I’m also a computer scientist and am transferring from android to ios, so I’ve been learning a couple of things at a slow pace when school allows. I’ve also been trying to learn a couple of other things like soldering and stuff dealing with electronics in general.
Replies 56
IllusionXBrossard, QC · Mar 14, 2014#2well, it's winter up here... meets usually don't start happening before April. I would say summer is when all the car meet happen.. june, july, august..
vaironlThread starter-- · Mar 14, 2014#3 Originally Posted by
IllusionX ↑ well, it's winter up here... meets usually don't start happening before April. I would say summer is when all the car meet happen.. june, july, august..
I believe is the same here. I got my car in August so I don't know what to expect for the next couple of months.
GolddeenohColumbia, SC · Mar 14, 2014#4Just did a Cars and Coffee meet, fairly low key though.
AinealVirginia · Mar 17, 2014#5 Originally Posted by
vaironl ↑ I believe is the same here. I got my car in August so I don't know what to expect for the next couple of months.
which part of Va are you from?
vaironlThread starter-- · Mar 17, 2014#6 Originally Posted by
Aineal ↑ which part of Va are you from?
Reston
JumpmanYarisSO. INDIANA · Mar 17, 2014#7Kicking it like jet lee
sqcompBack at home · Mar 24, 2014#8What am I doing? I'm working on my other car...
The Yaris is doing the daily driver routine, helping me pay my bills. We have cars & coffee going on out here all year as long as it's not raining or worse.
I'm about to throw down for a "big" turbo upgrade on Friday.
Tubular manifold, GT3071r, TS Hypergate45 WG, TS Raceport BOV, all the other regular accoutriments, FID 1000cc injectors, rescale, dyno & tune on gas.
The shop mentioned that I should "learn" the car at 350-375hp as I'll be doing HPDE and CSCC track day events. The tuner mentioned that the SCCA types usually run 3-400hp and the time attack drivers run more than that more often. We can re-tune it to 400hp when I feel I'm ready. After that we'd install all the fuel components I have for it taking it above 425hp...as well as building the engine...
Picture not included in this copy
Picture not included in this copy
vaironlThread starter-- · Mar 24, 2014#9 Originally Posted by
sqcomp ↑ What am I doing? I'm working on my other car...
🤤
I really wish I can do a forced induction project some day.
Oh well... one can dream.
fnkngrvIn The Hotbox · Mar 24, 2014#10 Originally Posted by
sqcomp ↑ What am I doing? I'm working on my other car...
The Yaris is doing the daily driver routine, helping me pay my bills. We have cars & coffee going on out here all year as long as it's not raining or worse.
I'm about to throw down for a "big" turbo upgrade GT3071r
Single scroll?
sqcompBack at home · Mar 25, 2014#11Yes, it's single scroll. Doing my research, I came to the result that the 3071 will spool just fine seeing that it's DBB and a smaller turbo. This along with the purpose of the car, being an HPDE car...and perhaps at some point a time attack car...I won't need massive power. I'm thinking of maxing out this setup with a GTX3071r at some point...only after exploring the 500hp mark with the current turbo.
I have no issues with getting to or working at the track...
Picture not included in this copy I'll be at the track again on Saturday. Enough of these days and I'll have my season membership paid for.
sqcompBack at home · Mar 28, 2014#12Okay...I lied.
We decided to use the 3076r instead. Cruel world.
Picture not included in this copy
Picture not included in this copy
The hot side of the turbo has been removed and is accompanying the headers for ceramic coating. One has to protect the investment and keep the heat in the exhaust system for a few extra ponies.
...they didn't have the 3071 in stock so they replaced it with a 3076.
sqcompBack at home · Apr 10, 2014#13Picture not included in this copy
Cold side installed
Picture not included in this copy
Hot side installed
The hot side is ceramic coated along with the entire manfold. I'll be wrapping the downpipe and putting a blanket on the turbo itself.
the rest of the small stuff is going on tomorrow, tuning on saturday.
cross your fingers for 425 to the wheels.
vaironlThread starter-- · Apr 10, 2014#14 Originally Posted by
sqcomp ↑ Picture not included in this copy
Cold side installed
Picture not included in this copy
Hot side installed
The hot side is ceramic coated along with the entire manfold. I'll be wrapping the downpipe and putting a blanket on the turbo itself.
the rest of the small stuff is going on tomorrow, tuning on saturday.
cross your fingers for 425 to the wheels.
Don't know what's going on, but good luck sir!
Sent from my iPhone using Tapatalk
fnkngrvIn The Hotbox · Apr 10, 2014#15 Originally Posted by
vaironl ↑ Don't know what's going on, but good luck sir!
Sent from my iPhone using Tapatalk
This is his SRT-4
Sent from my SCH-I545 using Tapatalk
sqcompBack at home · Apr 10, 2014#16Yeah..I'm not playing this with the Yaris. I'm too paranoid to mess with my daily.
vaironlThread starter-- · Apr 10, 2014#17 Originally Posted by
sqcomp ↑ Yeah..I'm not playing this with the Yaris. I'm too paranoid to mess with my daily.
Same here. I don't have a garage to let the car sit or a second car. I keep beating myself of whether to touch my car or leave it as is.
I went to a car cruise (1st one ever) got passed by miatas in such an embarrassing way. Not that the miatas are embarrassing, just that I thought the Yaris was a bit faster :(.
fnkngrvIn The Hotbox · Apr 10, 2014#18Tiamat is my DD and has been boosted 4 years now. Only blown the one motor which had her off the road for 3 weeks. Took that long because of lack of buddy assistance. NORMALLY you don't blow the motor so don't make that a reason not to.
sent from my m-o-b-i-l-e
sqcompBack at home · Apr 11, 2014#19That's why I have a project car.
I'm not playing with the drivetrain on the Yaris. Toyota did a great job with it.
I have the space for whatever project. It's just a nice sense of security for me at this point.
sqcompBack at home · Apr 16, 2014#20And the sickness continues...
Picture not included in this copy
You can see the hot side that is ceramic coated.
Picture not included in this copy
Hot side down to the downpipe. This is going to be blanketed and wrapped. Notice this setup is V-band connected...
Picture not included in this copy
The weenie 2 1/2" K&N Typhoon CAI versus the 4"-3" short ram that is going on. You also notice the new fuel rail that hides 1000cc injectors.
Picture not included in this copy
...This shot is the most unfortunate. What you're seeing is the back of the downpipe. The flashlight completely illuminated the dump tube. It looks like the tube is a light itself. It was just perfect timing on the picture.
Picture not included in this copy
This is a full feed and returned fuel system with a rising rate FPR and an inline filter. The car is now corn fed completely. I have now officially put more into the car than I paid for it. I am also going to sell off some of the components taken off to dull the pain of the cost.
sqcompBack at home · May 9, 2014#21Finally got the car on the dyno after a lengthy fight with the fuel.
We're settling for 20lbs of boost, a little north of 400whp, until I build the block next year sometime. I'll post the dyno sheet next week. We tried 24lbs at near 500whp but the fuel leaned out too much at 4700rpm. We dialed it back and adjusted timing. I'll need to throw in another 255 or a 044 Bosch in the tank to reach higher boost.
A 5 axis head and built engine will easily get the 24-26 lbs of boost I'm looking for. The turbo can hold 32-35 IIRC...so it's not being pushed anywhere near limits.
sqcompBack at home · May 15, 2014#22Finally got the car back. This thing gets on it...405hp to the wheels. Suspension, 044 and a retune is next. The damned shop didn't give me a good dyno sheet for all the money I spent...no gradients to judge the HP & Tq curve.
I'll just dyno somewhere else. Long story with the shop and some hidden charges...
vaironlThread starter-- · May 15, 2014#23 Originally Posted by
sqcomp ↑ Finally got the car back. This thing gets on it...405hp to the wheels. Suspension, 044 and a retune is next. The damned shop didn't give me a good dyno sheet for all the money I spent...no gradients to judge the HP & Tq curve.
I'll just dyno somewhere else. Long story with the shop and some hidden charges...
Sorry to hear about that shop experience. Just out of curiosity, have you been doing most of the stuff yourself?
sqcompBack at home · May 16, 2014#24Unfortunately no. If I had more space and the now how to program my Diablosport I would. I have the tools, just no space. HOA hags get crotchety when you have the entire exhaust system torn down in the garage and driveway.
That being said, I do have a place about an hour away where I can do all my suspension and brake work...
I am treating the skittle to new custom badging. The front logo, instead of the ram, will say, "C2H6O" and the rear badge will be replaced from the SRT-4 stock badge to say "Neon ?"
I did also buy and fill a nice little 5 gallon container with automotive everclear JIC I get caught low before I can fill up.
sqcompBack at home · May 16, 2014#25Picture not included in this copy
Front badge rendering
Picture not included in this copy
Rear badge rendering
sqcompBack at home · May 26, 2014#26Turned out very nice...
Picture not included in this copy
Picture not included in this copy
LTHatchNewark NJ · May 26, 2014#27Wonderful build! Is wheel hop a big issue with your SRT4? LOL love the ethanol badge.
vaironlThread starter-- · May 26, 2014#28 Originally Posted by
sqcomp ↑ Turned out very nice...
Picture not included in this copy
Picture not included in this copy
They look so nice!!! 👍
Thanks a lot for taking out of your time to keep updating us.
sqcompBack at home · May 26, 2014#29Wheel hop IS an issue with the OEM or even hard plastic inserts in the mounts.
Fortunately for me, even after receiving a briefing from the hacks that attempted to put on a turbo kit on my car saying otherwise, I've easily managed wheel hop. Even with the wrong wheel drive, I can launch the car fairly quickly. It's all clutch play and gas actuation otherwise called the driver's mod...
...oh yeah, and solid motor and transmission mounts.
The next thing coming for the car is a Walbro 416 pump with a bottleneck fix in the canister. The Walbro 255 isn't cutting it and won't for my goal of 500 WHP. This pump and a re-tune will flex the low and mid HP and TQ from where I have it now.
After that comes a 2-step/WOT box and boost by gear box. Then, finally, I'll concentrate on the suspension. Unfortunately I'm a working man and not independantly wealthy. This suspension, while relatively inexpensive totalling around $2000, will take time. It involves everything from new SS brake lines, strut and sway bars, nice KW coilovers, to all new bushings. Thankfully I can install all these myself with the help of my brother.
So, pop a top on a beer and watch it happen.
The goal is to drive this car around PIR in a HPDE event through the CSCC league. Of course I'll have GoPro for all that.
@LT - These badges were made by one of your fellow peeps from NJ.
LTHatchNewark NJ · May 26, 2014#30Would you mind sharing what the driver's mod is? The only way i managed to get around wheel hop is just to dump it at a higher RPM in my Yaris, is that similar to yours? So you're putting down 405fwhp on a stock bottom end? Is it common for the SRT4 engines to take that much abuse in stock form?
How is the vibration with those solid mounts? Would you mind taking a few larger resolution pictures between your 416 vs 255 pump when you get your hands on it?
Who was the person that made those badges here in NJ for you?
fnkngrvIn The Hotbox · May 26, 2014#31So far I am really happy with my AEM FP. They ate relatively newer to the scene, but flow very nice. Now if I can manage to get my adapter plate finished for my TB I should be stylin.
sent from my m-o-b-i-l-e
sqcompBack at home · May 27, 2014#32@ LT - the stock engine will handle 435WHP. I'm looking to peak at 500 WHP and then transplant the engine into a Lotus 7 chassis.
Along the way I'll have as much fun with the neon as possible.
The driver's mod means that you lay off the right pedal enough to get traction and not blow off the tires. The boost box and 2-step will also help that when I put those on.
sqcompBack at home · May 27, 2014#33Hey Fnk...pics of the installed setup are due!
vaironlThread starter-- · May 27, 2014#34 Originally Posted by
sqcomp ↑ @ LT - the stock engine will handle 435WHP. I'm looking to peak at 500 WHP and then transplant the engine into a Lotus 7 chassis.
Along the way I'll have as much fun with the neon as possible.
The driver's mod means that you lay off the right pedal enough to get traction and not blow off the tires. The boost box and 2-step will also help that when I put those on.
So what's up with your Yaris? I know you said no mods for it but I'm just curious.
Sent from my iPhone using Tapatalk
sqcompBack at home · May 27, 2014#35The yaris used to be a sound car back in 2010-2012. It did well enough to go to IASCA world Finals. I placed fourth in my class...ONLY because of a processor blow out the night before the competition. I had a falling out with the competition team after finding out that the jerky who did the mods on the processor had a 100% failure rate. People knew but no one told me...
...I have issues with people witholding important facts like that...
There were other issues with the team, but this directly led to me selling all my equipment and getting into a project car, the SRT. Now it's going to morph into me fixing this car up and then transplanting the engine into a Lotus 7 chassis in a few years.
vaironlThread starter-- · May 28, 2014#36 Originally Posted by
sqcomp ↑ The yaris used to be a sound car back in 2010-2012. It did well enough to go to IASCA world Finals. I placed fourth in my class...ONLY because of a processor blow out the night before the competition. I had a falling out with the competition team after finding out that the jerky who did the mods on the processor had a 100% failure rate. People knew but no one told me...
...I have issues with people witholding important facts like that...
There were other issues with the team, but this directly led to me selling all my equipment and getting into a project car, the SRT. Now it's going to morph into me fixing this car up and then transplanting the engine into a Lotus 7 chassis in a few years.
Found your old threads and they got me a bit interested in a head unit. There are so many things I want to do to my car... But I should probably pay it off first.
Sent from my iPhone using Tapatalk
sqcompBack at home · May 29, 2014#37What do you want from a head unit?
vaironlThread starter-- · May 29, 2014#38 Originally Posted by
sqcomp ↑ What do you want from a head unit?
Not really sure. Would be pretty cool to have video and navigation support.
Sent from my iPhone using Tapatalk
sqcompBack at home · May 29, 2014#39We should switch this conversation over to the car audio section...
vaironlThread starter-- · May 29, 2014#40 Originally Posted by
sqcomp ↑ We should switch this conversation over to the car audio section...
We definitely should. Sadly I can't buy any of this stuff yet, so I'll wait until I'm sure I won't waste anyone's time.
Sent from my iPhone using Tapatalk
JamesWilsonLondon · Jun 4, 2014#41Currently nothing and waiting for the FIFA World Cup 2014 to start with in couple of days.
sqcompBack at home · Jun 7, 2014#42waiting for a Walbro 416 to be worked into a new canister with a BNF and a 6~an feed and 4~an return.
A real baseline dyno and a tune to follow to bring the full spool down to the 3000-3250 RPM range.
fnkngrvIn The Hotbox · Jun 7, 2014#43Taking a friend to see GODZIIIIIIRRRRRAAAAA! For the 4th time in the theater.
sent from my m-o-b-i-l-e
sqcompBack at home · Jun 7, 2014#44^GODZIRRA!!!!
You'll love the blue flame effect!
fnkngrvIn The Hotbox · Jun 8, 2014#45 Originally Posted by
sqcomp ↑ ^GODZIRRA!!!!
You'll love the blue flame effect!
Like I said it was the forth time to see it in the theater for me ;-)
I really enjoy it. It is a great update to the origins of the movie back in the day. The rendition with Matt Broderick was just "ok" since it was such a great departure. My only real complaint is when a certain someone dies because it just feels disconnected. Trying not to spoil things so that is all I will say.
sent from my m-o-b-i-l-e
fnkngrvIn The Hotbox · Jun 8, 2014#46Tiamat is now dropped off to Pittman Paint & Airbrush for the next few weeks....prepping to board a plane for LGA.
sent from my m-o-b-i-l-e
JumpmanYarisSO. INDIANA · Jun 8, 2014#47What happen to the other thread with this same tittle?
sqcompBack at home · Jun 8, 2014#48Picture not included in this copy
Walbro experiment.
255 on the left and 416 on the right. Go figure that the smaller pump on the right will work with ethanol and over 700hp whereas the 255 will max out at around half of that on ethanol.
I'm going to be the first NSRT-4 with a Walbro 416 using our stock canister. I'm testing fuel scavenging at 1/8th of a tank to see how the 416 performs.
sqcompBack at home · Jun 8, 2014#49Adrian,
I hear you about the disconnected part. That's why I wasn't too critical about the acting. The actors are fine BUT the script...it's like it came out of a Godzilla movie. Oh...wait...
LTHatchNewark NJ · Jun 9, 2014#50Thank you for the pump comparison pictures SGcomp, are you going to use a hot wire kit on your new 416?