fnkngrvOriginal postIn The Hotbox · Mar 9, 2014#1For now this is just a placeholder. I will try my best to put things together to discuss all of my changes, plans, and upgrades with the high hopes of reaching 175mph in the standing mile and then whatever else I can get by the 1.5 mile.
Here is a teaser for now:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
And even though not performance related:
Picture not included in this copy
Replies 68
Jason@SportsCarDebary, FL · Mar 10, 2014#2Valve cover is awesome.
malibuguyWestminster, MD · Mar 11, 2014#3Nice!
TidUnited States · Mar 28, 2014#4love the cf valve cover
scioncrewHB · Mar 28, 2014#5sweet motor man
fnkngrvThread starterIn The Hotbox · Mar 29, 2014#6 Originally Posted by
scioncrew ↑ sweet motor man
Yeah, I am super stoked. You have no idea. I am hoping to continue the heritage of what great things it has done by getting it into the Guinness Book of World Records. I have submitted my application for this summer. 🎉
scioncrewHB · Mar 29, 2014#7sweet so what is you setup?
justjesusOrange County · Mar 31, 2014#8how much power you looking to make?
fnkngrvThread starterIn The Hotbox · Mar 31, 2014#9 Originally Posted by
justjesus ↑ how much power you looking to make?
As much as we can. Hoping for 450+ on c12 or c16. Street will be much less aggressive as it will be on 91/93. Not doing water meth either.
From my m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · Apr 28, 2014#10Few teasers of the 2014 build:
New ID1000 injectors have arrived!
Picture not included in this copy
PTP Lava Rock Turbo Blanket!
Picture not included in this copy
BadLandz Electric Exhaust Cutout Kit!
Picture not included in this copy
fnkngrvThread starterIn The Hotbox · Apr 28, 2014#11The bulk of the work will be done over the next couple weeks. I have the car at the shop and we will begi work tomorrow. Pretty excited!
some basics:
- Engine install
- Turbo refresh
- Return Fuel System
- Battery Relocation
- Custom built oil catch can
- AEM UEGO refresh
- Upgrade to Boost Solenoid from manual controller
- Throttle Body work
fnkngrvThread starterIn The Hotbox · May 3, 2014#12Anyone up for some more pics?
ilikericesavannah, ga · May 3, 2014#13I swear if there isn't a daily picture update, I will murder a kitten each day
fnkngrvThread starterIn The Hotbox · May 3, 2014#14New Turbo:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Side by Side comparison of new EFR (Left) and old T28 (Right). Not really sure if the picture does enough justice on the difference, but it is a lot larger:
Picture not included in this copy
Throttle Body upgrade:
Picture not included in this copy
Tear down process for new new setup installation:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
fnkngrvThread starterIn The Hotbox · May 3, 2014#15Recently both my UEGO O2 sensor and Autometer Oil Pressure Sending Unit (OPSU) died so I had to order new ones. Will be moving the OPSU to a T off the engine and removing the oil sandwish adapter that I have.
We have to fab a new downpipe due to the way the new turbo is designed. We suspected, but still a bummer. When we do it we will be getting rid of the second O2 bung for the rear factory sensor since it is not needed anymore.
ilikericesavannah, ga · May 3, 2014#16When you do the OPSU, could you take pictures of where you are putting it and the hardware you are using.. I have been debating on weather or not I should get the Sandwich adapter or not, but wasn't sure where I could get another source of oil pressure.
Also, where are you getting a signal for your Water temp gauge? Are you using the signal from the OEM sensor to ECU? If so, what gauge are you using? If not, where did you install your Temp Sensor?
Sorry, I am in the process of doing my gauges and trying to find the cleanest and easiest way to do it.. searching for all my options.
thanks
fnkngrvThread starterIn The Hotbox · May 3, 2014#17We can do that.
sent from my m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · May 3, 2014#18Any of the FI guys using a 3-3.5" thick/deep FMIC by chance? I am curious about clearances. Right now my FMIC is 2.5" thick/deep. I am wondering if anyone can confirm whether or not you can actually go as deep as 3.5". If so it opens up a lot more options since going with a taller version won't buy you much with the crashbar being in the way.
fnkngrvThread starterIn The Hotbox · May 3, 2014#19 Originally Posted by
ilikerice ↑ When you do the OPSU, could you take pictures of where you are putting it and the hardware you are using.. I have been debating on weather or not I should get the Sandwich adapter or not, but wasn't sure where I could get another source of oil pressure.
Also, where are you getting a signal for your Water temp gauge? Are you using the signal from the OEM sensor to ECU? If so, what gauge are you using? If not, where did you install your Temp Sensor?
Sorry, I am in the process of doing my gauges and trying to find the cleanest and easiest way to do it.. searching for all my options.
thanks
Unless there is a space issue we will be installing a T fitting here:
Picture not included in this copy Picture not included in this copy fnkngrvThread starterIn The Hotbox · May 3, 2014#20Ordered a new FMIC as well. After further review looks like I will be going with an upgraded intercooler too. Current one is a fin type 28x5.5x2.5 1 5/8". A new bar and plate type 28x7x2.5 2.5" is on the way. I didn't really know about IC design when the first setup was purchased. I am pretty curious if I had gone bar and plate before along with bigger injectors if I would have been able to squeeze 15-20 more hp/tq. New IC will be here by Tuesday.
ilikericesavannah, ga · May 3, 2014#21 Originally Posted by
fnkngrv ↑ Unless there is a space issue we will be installing a T fitting here
thanks, that helps me a lot. Will probably go that route, fairly easy to get to with intake mani off
malibuguyWestminster, MD · May 4, 2014#22Those badlandz cut outs are a joke. People bring them in all the time to be installed. They leak and ive seen several go bad within a few months.
fnkngrvThread starterIn The Hotbox · May 4, 2014#23 Originally Posted by
malibuguy ↑ Those badlandz cut outs are a joke. People bring them in all the time to be installed. They leak and ive seen several go bad within a few months.
Honestly from my research the bulk of the electric cutouts are junk no matter what you pay. I have also seen a lot of feedback where people don't use them correctly. For example the open them under load. They are not designed for that. It will be used most likely 2 weekends a year at most so I am not seriously worried. I called and spoke with them and they told me if I ever have a problem they will ship me replacement parts without a problem. Also we have a few folks that use them at my functions without issues. I guess we will see.
sent from my m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · May 6, 2014#24fnkngrvThread starterIn The Hotbox · May 6, 2014#25fnkngrvThread starterIn The Hotbox · May 6, 2014#26Also today we found something interesting on the original turbo. Not really sure when this began to happen, but the weld began to give way on the internal wastegate flap. Started to peel like opening a Lunchable so I was losing plenty of actual pressure. Who knows.....could have been doing this when I did runs last year. Only speculation, but then it is entirely possible that I could have broken 150mph in the 1.5 mile course even with the current at the time fuel system setup.
Picture not included in this copy
sent from my m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · May 7, 2014#27The new FMIC arrived today. Now with this it will require new couplers so those are on the way too.
Picture not included in this copy
Also we wrapped up the fuel regulator and line install to the rear of the car preparing for the install of the new fuel pump and inline filter.
Picture not included in this copy
Picture not included in this copy
Also relocated the water temp sensor for higher accuracy from the lower radiator hose which of course is going to show much cooler since it is on the inlet side of the motor.
Picture not included in this copy
ilikericesavannah, ga · May 8, 2014#28The kittens are really appreciating you posting daily..
I have been debating on where to wire my coolant temp sensor also.. I wasn't sure if I should to with lower or upper radiator hose.. I would think lower would have been better because you would get the temp sooner if you begin to overheat. But then the upper would be good because then if the fans stop working then you would see a rise there too sooner..
I don't know, I guess it really doesn't matter right? At some point the coolant temp will increase if it gets too hot
fnkngrvThread starterIn The Hotbox · May 8, 2014#29The biggest problem with this car is that the preferred location is so tight where the draincock is on the rear of the block so that is just about out as an option. The problem with using the lower hose is that it is the coldest your coolant will be since it is just as it has left the radiator. At that point you are guessing what the temp really is in the engine. Best guess that seasoned racers have told me is that you need to add 35-40° to what your gauge is showing with it being on the lower hose. We have discussed tapping the block on the drivers side in the future and taking it off the hose altogether, but that will be very tight quarters too.
sent from my m-o-b-i-l-e
CTScottUSA, CT · May 8, 2014#30You could also intersect the hoses that go into and out of the throttle body.
ilikericesavannah, ga · May 8, 2014#31OMG SCOTT,
you're Brilliant..
but what adaptor would be best to use on those hoses? Just "T" one of them off and add a sensor at the end of one of them?
CTScottUSA, CT · May 8, 2014#32 Originally Posted by
ilikerice ↑ OMG SCOTT,
you're Brilliant..
but what adaptor would be best to use on those hoses? Just "T" one of them off and add a sensor at the end of one of them?
That's how I would do it. I think it would give a bit closer to actual engine temp than the radiator hose would.
Jason@SportsCarDebary, FL · May 8, 2014#33Maybe I missed it, but why are you not sourcing the water temp from the factory sensor in the head? That is where I pull mine from. 🤷 Then I use the MI sandwich adapter for oil temp and pressure. Easy.
fnkngrvThread starterIn The Hotbox · May 8, 2014#34 Originally Posted by
Jason@SportsCar ↑ Maybe I missed it, but why are you not sourcing the water temp from the factory sensor in the head? That is where I pull mine from. 🤷 Then I use the MI sandwich adapter for oil temp and pressure. Easy.
Because the ECU needs the most accurate reading not some additional gauge that has nothing to do with the way engine runs. If I weren't going to be doing what I am doing then I wouldn't worry about it, but I push the engine very hard and fast so this is how I want it to be.
As for the sandwich adapter I will be selling mine. I spoke above how I will be moving the oil pressure sending unit even off the T. I prefer not to run sandwich adapters. Case in point that my jack was run over during the winter and I had to change the oil about 6 weeks back. I had no choice but to take the car to a shop. I told them that the sandwich adapter was there yet they still somehow ended up loosening it and then it caused a leak after the oil change plus the tech damaged my sending unit in the process. Not worth the trouble if I end up in a bind.
xnamerxxso cal · May 8, 2014#35Not to pick nits or anything, but wouldn't you want to source the temp data from the head and not from a coolant hose? Since there is already a boss for the temp sensor it seems like a no brainer.
In the crapcan enduro car we decided against the hose sensor because it was just another avenue for failure and the temp data wasn't going to be good enough if there was a leak or some other failure.
fnkngrvThread starterIn The Hotbox · May 8, 2014#36 Originally Posted by
xnamerxx ↑ Not to pick nits or anything, but wouldn't you want to source the temp data from the head and not from a coolant hose? Since there is already a boss for the temp sensor it seems like a no brainer.
In the crapcan enduro car we decided against the hose sensor because it was just another avenue for failure and the temp data wasn't going to be good enough if there was a leak or some other failure.
Not to sound like a dick, but to each their own. The OEM sensor is feeding the data to the ECU in my build. This is one of those things like engine oil or log vs tube style turbo manifold designs. It could be debated all day and night. We all make choices in our builds and have our own experiences. In my case I am also leveraging the experience of several builds that do what I do also. One of the most interesting things is how people in general believe that auto-x, circle track, road course, 1/4 drags, and what I do should all be built the same which of course is not true. The stressors are all different.
sent from my m-o-b-i-l-e
Jason@SportsCarDebary, FL · May 8, 2014#37 Originally Posted by
fnkngrv ↑ Because the ECU needs the most accurate reading not some additional gauge that has nothing to do with the way engine runs. If I weren't going to be doing what I am doing then I wouldn't worry about it, but I push the engine very hard and fast so this is how I want it to be.
As for the sandwich adapter I will be selling mine. I spoke above how I will be moving the oil pressure sending unit even off the T. I prefer not to run sandwich adapters. Case in point that my jack was run over during the winter and I had to change the oil about 6 weeks back. I had no choice but to take the car to a shop. I told them that the sandwich adapter was there yet they still somehow ended up loosening it and then it caused a leak after the oil change plus the tech damaged my sending unit in the process. Not worth the trouble if I end up in a bind.
A simple plug-in OBD2 device will give you that temp reading (and more) without even getting your hands dirty. Seems pointless to have a secondary temp gauge that is not providing you the correct data.
http://shop.microimageonline.com/ScanGauge-II-SGII.htm ilikericesavannah, ga · May 8, 2014#38I compelely agree. I am just trying to get different idea's on how to set mine up. I would like to run Coolant temp gauge off my oem sensor. But then I wasn't sure if that would screw up the signal to the ecu. Also, something was brought to my attention, that it depends on the gauge I got, what signal (volts) does my gauge need? The oem signal could be different that the signal that my gauge requires to work properly. One of those things that I am unsure of.
Thats the reasoning for my questions about the gauges you are running. I didn't mean to stir any conflict with that. just seeing all my options.
xnamerxxso cal · May 8, 2014#39Most sensors are resistance type.
fnkngrvThread starterIn The Hotbox · May 9, 2014#40fnkngrvThread starterIn The Hotbox · May 9, 2014#41Oh yes, before I forget. Borg Warner doesn't actually tell you that the oil line flange fitting on the 6758 EFR turbo is a T15 40mm fitting so we had to order one of these which we installed today:
Billet Aluminum Turbo Oil Return Flange Kit w/ -10 AN Flare For Garrett GT15 GT17 GT20
Picture not included in this copy
sent from my m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · May 9, 2014#42 Originally Posted by
Jason@SportsCar ↑
Appreciate the input and idea Jason, but I personally will have my hands full paying attention to everything that I have to as it is and controlling the car at 150+ mph. Just for grins when we do the tune and dynamic pulls I will see about what the factory sensor is delivering for numbers compared to the gauge with its sensor in the new location. When I do I will report back with the results.
sent from my m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · May 9, 2014#43 Originally Posted by
ilikerice ↑ OMG SCOTT,
you're Brilliant..
but what adaptor would be best to use on those hoses? Just "T" one of them off and add a sensor at the end of one of them?
If you are running a turbo you would most likely actually be using these lines for cooling of it. I don't even have mine linked to the TB. The nipples on it are plugged.
sent from my m-o-b-i-l-e
fnkngrvThread starterIn The Hotbox · May 10, 2014#44I have started a contest to Guess That Tune in my vendor's section over at TuneMyToyota.com!
GUESS THAT TUNE! 🍻
fnkngrvThread starterIn The Hotbox · May 11, 2014#45New downpipe has been completed and installed. Removed both of the factory O2 sensors since they are no longer referenced as of last fall anyway.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
New JRT Customs fabricated oil catch can assembly ready to do some helpful work hopefully.
Picture not included in this copy
Picture not included in this copy
Also we decided to do some wire tucking for the coil pack harness to keep down rubbing issues and clean up the installation to really make the valve cover pop.
Picture not included in this copy
fnkngrvThread starterIn The Hotbox · May 13, 2014#46Well we have a heartbeat! Here is a quick video of the first start up. We of course need to get the idle set and the intercooler hasn't been installed yet, but here it is:
TTR 2014 Build First Start after install👍looking and sounding good.
fnkngrvThread starterIn The Hotbox · May 13, 2014#48 Originally Posted by
kou ↑ 👍looking and sounding good.
Thanks!
Holy hell the new setup is going to rip. We took the car out today for the first time to get my basic tune adjusted from the previous engine to be sure that I would make it down to NH safe and sound in a couple days.
The engine bay sounds totally different and the turbo sounds like a jet plane flying over and that is at the mere 9psi of boost. 😁
fnkngrvThread starterIn The Hotbox · May 14, 2014#49Almost forgot. The DEI heatshield arrived and we did install yesterday. It has replaced the anemic OEM insulation which incidentally practically disintegrated in our hands after 4 years of turbo use and that is with ceramic coating of the exhaust housing and heat wrap. Even though the new housing is ceramic coated and does have a lava blanket with the close proximity of the turbo to the firewall we can't be too careful.
Picture not included in this copy
fnkngrvThread starterIn The Hotbox · May 14, 2014#50 Originally Posted by
Jason@SportsCar ↑ Maybe I missed it, but why are you not sourcing the water temp from the factory sensor in the head? That is where I pull mine from. 🤷 Then I use the MI sandwich adapter for oil temp and pressure. Easy.
Originally Posted by
xnamerxx ↑ Not to pick nits or anything, but wouldn't you want to source the temp data from the head and not from a coolant hose? Since there is already a boss for the temp sensor it seems like a no brainer.
In the crapcan enduro car we decided against the hose sensor because it was just another avenue for failure and the temp data wasn't going to be good enough if there was a leak or some other failure.
Originally Posted by
Jason@SportsCar ↑
During the close to 20 miles of first driving yesterday we monitored the factory temp readings and then also on the gauge with the new location for it on the outbound hose from the engine simultaneously. The temps were within 1-3 degrees from the data that we logged. This included running at the current set 9psi of boost, hard launches, regular road travel, hill climbs, etc. I am running 100% AMSOIL Glycol Coolant along with the Mishimoto Liquid Chill Radiator Coolant Additive. I will continue of course to monitor via datalogging on the drive down to NH on Thursday and then back up with the new boost level (whatever that will be).