AstromanOriginal postWenatchee, WA · May 23, 2007#1Replies 16
blacksanVirginia · May 23, 2007#2Does the auto knob screw off? If so the manual knob is M12X1.25 thread pitch. So, if they are both the same thread pitch and there nothing extra like button to push then you should be good to go
AstromanThread starterWenatchee, WA · May 23, 2007#3Yeah, it screws off and there is no button... I suppose I could get it and if it doesn't fit sell it here, lol.
blacksanVirginia · May 23, 2007#4Go to your local hardware store and get the appropriate size nut and test fit it on the stick. If it is not the same thread size and pitch you will save yourself a lot of hassle.
AstromanThread starterWenatchee, WA · May 23, 2007#5... and money! Thanks for the idea! 🙂
blacksanVirginia · May 23, 2007#6No prob!
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 23, 2007#7from what ive seen the knob will not fit auto's but good luck anyway.....
blacksanVirginia · May 23, 2007#8 Originally Posted by
ROCKLAND TOYOTA ↑ from what ive seen the knob will not fit auto's but good luck anyway.....
Is it the thread size, or something else?
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 23, 2007#9^^ i forget but my friend's tc didn't fit....
blacksanVirginia · May 23, 2007#10 Originally Posted by
ROCKLAND TOYOTA ↑ ^^ i forget but my friend's tc didn't fit....
Hmmm, oh well.
I did find a guy that will make us custom knobs posted under the topic koolknobs.
acdaaznNJ · May 23, 2007#11If I recall, they do have a TRD knob for Automatic without the markings. Maybe that one would fit?
brickhardmeatInner City, Dallas · May 23, 2007#12There is a knob for autos at sparks. Not TRD.
I like the one from thailand accessories. You know who can get that one. I'll probably opt for that pedal set and shifter knob when the time is right.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 23, 2007#13i just got an old school set of blue pedals from the original scion xa/xb launch.....
AstromanThread starterWenatchee, WA · May 23, 2007#14I liked the styling of the leather TRD knob, and the emblem. Guess if its too big, there is always gorilla glue, 😆
blacksanVirginia · May 23, 2007#15 Originally Posted by
Astroman ↑ I liked the styling of the leather TRD knob, and the emblem. Guess if its too big, there is always gorilla glue, 😆
If that is the case you could still make it happen. Just go to a machine shop that is willing to do a small job and get them to make a threaded reducer. In other words the interior would be threaded to fit the shifter and the exterior threaded to fit the knob. I personally would prefer using brass stock.
KatanaUnder the hood! · May 26, 2007#16Nice part.
Doc ZaiusOttawa, ON, Canada · May 28, 2007#17Hey astroman... here's a page from
Toyota New Zealand... about halfway down they have a couple TRD knobs, and the one for the automatic looks exactly the same as the one for the manual, just without the shift pattern. And the parts numbers only differ by 2.
EDIT: *although*, here's a page from
TRD Japan... its the autumatic shifter, but in the first set of "Notes", it says that the screw pattern is
M8 x 1.25mm. And it says its for all automatic transmissions since 2001. So if the shifter you're interested in is for a manual, looks like it won't fit.