joey1320Original postLakewood, Ohio · May 21, 2007#1sorry no pics but you guys know what it looks like...
i ordered the ZPI pulley last week and finally replaced it today and i can totally feel the difference. the engine feels smooth and rev-happy.
definitely a good bang for the buck. can't complain about the finish product!
😆
Replies 22
AlphaFoxSpringfield, Mass · May 22, 2007#2hopefully it doesnt crack on you....
joey1320Thread starterLakewood, Ohio · May 22, 2007#3 Originally Posted by
AlphaFox ↑ hopefully it doesnt crack on you....
i inspected the pulley very well before i installed it and i'm 100% confident in its integrity. we will see how it goes!🙂
YarisGuyUSA · May 22, 2007#4I am envious that you have such an eye capable of inspecting the material integrity of bare aluminum. Good luck to you.
.
joey1320Thread starterLakewood, Ohio · May 22, 2007#5 Originally Posted by
YarisGuy ↑ I am envious that you have such an eye capable of inspecting the material integrity of bare aluminum. Good luck to you.
.
😕 ok... i know i can't visually inspect the aluminum, besides for cracks or stress marks, but the pulley looked great and i believe it will last a long long time.
people were upset with zpi due to their customer service but i got my pulley the following day after paying for it and the cs was great. sorry if you were one of the unhappy customers!
ChinoCharlesOH · May 22, 2007#6Lets keep the ZPI knocking in the proper threads. Don't go raining on Joe's parade!
Congrats on the pulley. 😁 Its a fun little mod, isn't it?
joey1320Thread starterLakewood, Ohio · May 22, 2007#7 Originally Posted by
ChinoCharles ↑ Lets keep the ZPI knocking in the proper threads. Don't go raining on Joe's parade!
Congrats on the pulley. 😁 Its a fun little mod, isn't it?
yes it is. wether it be zpi or nst, definitely a must have for the enthusiast.👍
Black YarisToledo, OH · May 22, 2007#8I would have anodized it b4 you installed it with all the salt used on the Ohio roads in the winter, that billet Aluminum is going to oxidize pretty quick
PetersRedYarisThe Black Hills of South Dakota · May 22, 2007#9 Originally Posted by
YarisGuy ↑ I am envious that you have such an eye capable of inspecting the material integrity of bare aluminum. Good luck to you.
.
That statement is just plain rude (not what this forum needs 👎). It IS possible to inspect the craftsmanship of a machined aluminum pulley for quality with your naked eye. I had one of these in my hands before selling it on ebay. They do seem well made. In addition, because they use a centering pin, they lack the groove that cracked in the TC pulley. No, they are not anodized, not that they need to be, but they do seem well made. I'm not running any pulley for warranty issues (a whole new arguement we don't need to get into here), just saying this type of post is uncalled for.
VanderkittenBerkeley, CA · May 22, 2007#10It's pretty funny how people are so hung up on Anodize. We work with a custom bicycle frame builder for our bicycle team (who all ride aluminum bikes...) and he confirmed nothing will happen except for some surface oxidaztion. (have you ever seen the INSIDE of an ALUMINUM MTB FRAME?! ) We run prototype bikes with no finish to save money and speed start to finish testing periods... you could ride these forever, and if you got tired of the oxidazation, have them bead blasted and polished,painted, powdercoated or anodized.
He said the pulley is the same way, and other than looks (and Ano is pretty cheap) there is no difference at all... 🤷
Also, the billet stock will be certified (the batches are checked by x-ray)and when aluminum is bought by the bar it will have this gaurantee.
I think the whole thing about the pulleys continually surfacing is so lame...🤮 it's a $100 part, like a pair of sneakers. Hey, guess what, it is a part designed and intended for OFF HIGHWAY use, like coil-overs, headers, Cold Air Intakes, etc. Sometimes parts fail, sometimes service lacks, but if you go through your life with a grudge about this than it's YOU with the problem... think about that one!
VanderkittenBerkeley, CA · May 22, 2007#11 Originally Posted by
joey1320 ↑ definitely a good bang for the buck. 😆
Enjoy it!! 👍
turboyarisSouthern New Jersey · May 22, 2007#12unorthodox doesnt anodize their pulleys either.....
but way to go joey its a good buy and contrary to everyone thinking your crank pulley will fall apart, it won't.
joey1320Thread starterLakewood, Ohio · May 22, 2007#13 Originally Posted by
turboyaris ↑ unorthodox doesnt anodize their pulleys either.....
but way to go joey its a good buy and contrary to everyone thinking your crank pulley will fall apart, it won't.
thanks guys. i also got the exhaust flange, i'm picking up the k03 turbo tomorrow and hopefully i'll get the spare engine when i get back from florida.
then i'll start to mock up the turbo kit.🤘
nick1983Winnipeg Manitoba · May 23, 2007#14Did you notice any engine vibration after installing the pulley?
joey1320Thread starterLakewood, Ohio · May 23, 2007#15 Originally Posted by
nick1983 ↑ Did you notice any engine vibration after installing the pulley?
no not at all.
carloshPanama · Jun 7, 2007#16 Originally Posted by
nick1983 ↑ Did you notice any engine vibration after installing the pulley?
Hi, i use since 1 year a cranck pulley Unorthodox underdrive and have a bit of vibrations when the AC and WP are working, but nothing to worry. the only problem that I have is about the wear of the belt (premature wear). But this I am happy yet with my pulley 👍 it gives a performance about 10HP
joey1320Thread starterLakewood, Ohio · Jun 7, 2007#17 Originally Posted by
carlosh ↑ Hi, i use since 1 year a cranck pulley Unortodox underdrive and have a bit of vibrations when the AC and WP are working, but nothing to worry. the only problem that I have is about the wear of the belt (premature wear). But this I am happy yet with my pulley 👍 it gives a performance about 10HP
hablas espanol???
i haven't noticed any vibrations at all, with or without the a/c on. and the belst are cheap and easy to replace, so if theres some premature wear i really don't care🙂
ism3tSouthern California · Jun 8, 2007#18 Originally Posted by
YarisGuy ↑ I am envious that you have such an eye capable of inspecting the material integrity of bare aluminum. Good luck to you.
.
i was honestly ROFLing after reading this.
quite rude 👎 , but GOD DAMN it was well spoken👏 🙇 🤘 👍 🎉 😆 😁 🙌 🙂 😉 .
🤷
blacksanVirginia · Jun 8, 2007#19If anyone ever wants to check the integrity of a small piece like the pulley stop by a machine shop and have them magniflux your part. It is rather cheap and does not take much time at all. The only problem you might encounter if finding a shop that will take on small jobs.
carloshPanama · Jun 8, 2007#20 Originally Posted by
joey1320 ↑ hablas espanol???
i haven't noticed any vibrations at all, with or without the a/c on. and the belst are cheap and easy to replace, so if theres some premature wear i really don't care🙂
Hola si hablo español, tu tienes instalada una polea unorthodox?
YarisGuyUSA · Jun 8, 2007#21 Originally Posted by
ism3t ↑ i was honestly ROFLing after reading this.
quite rude 👎 , but GOD DAMN it was well spoken👏 🙇 🤘 👍 🎉 😆 😁 🙌 🙂 😉 .
🤷
Just being honest and speaking factually instead of throwing out an opinion 😉
Thank you for noticing 🤘 🙇 😳 👍 😁
carloshPanama · Jun 8, 2007#22 Originally Posted by
carlosh ↑ Hi, i use since 1 year a cranck pulley Unorthodox underdrive and have a bit of vibrations when the AC and WP are working, but nothing to worry. the only problem that I have is about the wear of the belt (premature wear). But this I am happy yet with my pulley 👍 it gives a performance about 10HP
these vibrations occur when to the parked car (while I am in a semaphore for example, and the radiator fan is ON + AC ON ). I think this must to the car computer (when I install the pulley and reset the compu..) adjusted the revolutions of the motor by the low weight of the pulley (the underdrive pulley do this accesories run slow). 😁
joey1320Thread starterLakewood, Ohio · Jun 9, 2007#23 Originally Posted by
carlosh ↑ these vibrations occur when to the parked car (while I am in a semaphore for example, and the radiator fan is ON + AC ON ). I think this must to the car computer (when I install the pulley and reset the compu..) adjusted the revolutions of the motor by the low weight of the pulley (the underdrive pulley do this accesories run slow). 😁
el mio esta bien, no me a dado ningun problema. buena suerte!