Yarisworld Archive

Hey Smart Guys... Look at this

23 posts · 8,029 views

Replies 22

blacksanVirginia · May 16, 2007#2
It would be interesting too try, but the asking price is ridiculous!
eTiMaGoBangkok, Thailand · May 16, 2007#3
read the description, it's $132 + shipping...

sounds like a stock throttle body overbored from 45mm to 47mm, is that really enough to make a big difference?
blacksanVirginia · May 16, 2007#4
Originally Posted by eTiMaGo ↑
read the description, it's $132 + shipping...

sounds like a stock throttle body overbored from 45mm to 47mm, is that really enough to make a big difference?
Ops, I missed that price! The slight overbore did make a difference on my Japanese 4 cylinder motorcycles and they where roughly the same size (CC) and HP output of my Yaris. We generally found that matching bigger carbs with better intake and exhaust really made a difference.
NutzoidsThread starterPhiladelphia · May 16, 2007#5
Originally Posted by eTiMaGo ↑
read the description, it's $132 + shipping...

sounds like a stock throttle body overbored from 45mm to 47mm, is that really enough to make a big difference?
$132 and Shipping is included!

"Your Genuine Chip Controlled Throttle can be purchased at U.S.$132.00 by us which includes your Air shipping charge to Japan."

But can it really make a difference?

😈
blacksanVirginia · May 16, 2007#6
Originally Posted by Nutzoids ↑
$132 and Shipping is included!

"Your Genuine Chip Controlled Throttle can be purchased at U.S.$132.00 by us which includes your Air shipping charge to Japan."

But can it really make a difference?

😈

When I had 1000+ CC, 4 cylinder, Japanese bikes with better intake and exhaust it did. Like most other mods you really didn't get the benefit in other part of the power band then top end.
ChinoCharlesOH · May 16, 2007#7
That isn't how I'm reading this. I'm seeing that this in fact does cost a grand but they'll buy your stock throttle body for $132. Either way, don't do it.
NutzoidsThread starterPhiladelphia · May 16, 2007#8
Originally Posted by blacksan ↑
When I had 1000+ CC, 4 cylinder, Japanese bikes with better intake and exhaust it did. Like most other mods you really didn't get the benefit in other part of the power band then top end.
Yeah but will we feel a 2mm difference? Doubt it will effect the Dyno that much!

😈

Originally Posted by ChinoCharles ↑
That isn't how I'm reading this. I'm seeing that this in fact does cost a grand but they'll buy your stock throttle body for $132. Either way, don't do it.
OK... I can see that too... I emailed them asking for more "Detailed" information... Guess I should just wait and see!

😈
ChinoCharlesOH · May 16, 2007#9
Look at how much material is on the manifold side of the TB! Its bore-a-licious.
ceresNY · May 16, 2007#10
Originally Posted by ChinoCharles ↑
That isn't how I'm reading this. I'm seeing that this in fact does cost a grand but they'll buy your stock throttle body for $132. Either way, don't do it.

That's the way I read it too.
You pay $999+28 shipping for their throttle. Send yours back to them and get $132 back ONCE they've received it. Which means you actually get $100 out of it as you paid for shipping.
blacksanVirginia · May 16, 2007#11
Originally Posted by Nutzoids ↑
Yeah but will we feel a 2mm difference? Doubt it will effect the Dyno that much!
When you went from 38MM to 40MM (typical smooth bore swap with velocity stacks on carbs) it did make a big difference! Of course you must also consider the weight difference between the motorcycle and the car.
MrJesterHomo · May 16, 2007#12
motorcycle vs yaris weight is almost identical😳 👍
blacksanVirginia · May 16, 2007#13
Originally Posted by MrJester ↑
motorcycle vs yaris weight is almost identical😳 👍
That really is not far from the mark.😁 My old GPZ 1100B1 was probaly even longer.🤣
YarisGuyUSA · May 16, 2007#14
Originally Posted by ceres ↑
That's the way I read it too.
You pay $999+28 shipping for their throttle. Send yours back to them and get $132 back ONCE they've received it. Which means you actually get $100 out of it as you paid for shipping.
Damn 😲

There may be some slight gains, but you have to ask yourself if a few hp is worth that much cash 😲
weaponrcamryPA--->MD<---WV · May 16, 2007#15
Yes that price is to high, plus you have to pay shipping(that should be at least free IMO) Anyway, it looks pretty legit, but you can do much more with a $1000. Email him and get some #'s. Looking at the sellers feedback they are good which shipping it. But if you go for this reason with the seller lower that god d*** price lol.
joey1320Lakewood, Ohio · May 16, 2007#16
just a waste of money. don't do it.
churpTropical Minnesota · May 16, 2007#17
Going from 45mm to 47mm is a 9% increase of area.....should be a good power gain! I'm after economy so not for me.....but heck of a lot cheaper than turbo, not as much guts, but not much for install and wont complicate things like a turbo.
Yaris RevengeMy own little world. · May 17, 2007#18
Ummm... can you not just bore your own for a lot less? Or is this one different in some other respect?

~YR
GalavoxxSan Francisco · May 17, 2007#19
Ask him to see some dyno numbers.
ceresNY · May 17, 2007#20
Originally Posted by Yaris Revenge ↑
Ummm... can you not just bore your own for a lot less? Or is this one different in some other respect?

~YR
Hell, that's probably what he's selling. The original with some simple mods. Would make sense as to why he's buying back your old one, since he can turn it around to make himself a $900 profit.
NutzoidsThread starterPhiladelphia · May 17, 2007#21
Originally Posted by Galavoxx ↑
Ask him to see some dyno numbers.
I asked for Dyno Numbers... I was told he doesn't have them...

So I asked if he GIVES me one... I would install it and Dyno it for him, then I would help him sell it here...

We'll see what he says!

😈
marcustoronto, canada · May 17, 2007#22
sound like a scam..theyre probably reselling the one they get from you...careful guys.
AlphaFoxSpringfield, Mass · May 17, 2007#23
cant you just bore out your own to make it bigger? thats all it looks like they did.