Yarisworld Archive

toyotafest 2007

35 posts · 35,162 views

esquivaOriginal postSouth Cali · May 13, 2007#1
toyotafest 2007 in long beach, ca

Replies 34

esquivaThread starterSouth Cali · May 13, 2007#2
here they are...just wanna share a few pics.....i no longer included the fujita yaris for everyone has seen it already....

5 attachments not included in this copy

esquivaThread starterSouth Cali · May 14, 2007#3
ITB..........

5 attachments not included in this copy

esquivaThread starterSouth Cali · May 14, 2007#4
😎

3 attachments not included in this copy

esquivaThread starterSouth Cali · May 14, 2007#5

2 attachments not included in this copy

esquivaThread starterSouth Cali · May 14, 2007#6
👍

5 attachments not included in this copy

esquivaThread starterSouth Cali · May 14, 2007#7
some stuff i got.....
a squishy toy......

3 attachments not included in this copy

esquivaThread starterSouth Cali · May 14, 2007#8
....mints (even the mints say yaris on them)
...a bandana............

4 attachments not included in this copy

eTiMaGoBangkok, Thailand · May 14, 2007#9
ahahahah that's some pretty cool and wild stuff!

kurokoma-kunmy own little world · May 14, 2007#10
Originally Posted by esquiva ↑
...a bandana............
no Yaris boxers/thongs?

Great pics btw!
Black YarisToledo, OH · May 14, 2007#11
That side dump exaust was interesting on the sedan.... and those taillights on that hatch are 🤮
nebulightPA · May 14, 2007#12
Picture not included in this copy


😳 😳 😳 😳 😳
kurokoma-kunmy own little world · May 14, 2007#13
nebulight, that is a datsun?
esquivaThread starterSouth Cali · May 14, 2007#14
Originally Posted by Thirty-Nine ↑
Wow -- come very cool cars. I love the rally xA. Was it a real rally car, or just a show piece?

I can't believe I didn't hear anything about this event beforehand (then again, I don't live in SoCal).
it is a rally car....it was featured in siphon mag...




anybody know who makes the ITB ...the one on the red xa?
is there a kit that would fit on ours?
ChinoCharlesOH · May 14, 2007#15
Danstoy makes the ITB kit. It will fit the Yaris with slight modification AFAIK.
nebulightPA · May 14, 2007#16
Originally Posted by kurokoma-kun ↑
nebulight, that is a datsun?
Far from it, it's a Toyota 2000GT. It's basically the first Japanese car to be really considered a classic collectible. They usually sell for a quarter million. Only a few were imported into the US, about 60-70 I believed, but only around 40 still remain.
spkrman2 · May 14, 2007#17
Originally Posted by nebulight ↑
Far from it, it's a Toyota 2000GT. It's basically the first Japanese car to be really considered a classic collectible. They usually sell for a quarter million. Only a few were imported into the US, about 60-70 I believed, but only around 40 still remain.
that car is awesome!
kurokoma-kunmy own little world · May 14, 2007#18
Originally Posted by nebulight ↑
Far from it, it's a Toyota 2000GT.
Thx for adding pic of close up logo. Guess it was looking like some kinda precursor of the 240z to me...
LucaItalia83Garda Lake -Italy - Verona · May 14, 2007#19
very nice !
Vic-2NZFEPanama · May 14, 2007#20
Love the Supra, looks sweet!
yaris514mtl514 · May 14, 2007#21
does anybody know where to buy the vitz emblem for the hood and the liftback door?
uncleyarisToronto · May 14, 2007#22
sponsor section/ebay
Fred2006Montreal ,Qc · May 15, 2007#23
Is that the intake whit the blitz SuperCharge ???

Where,how,how much, ???

Picture not included in this copy
ChinoCharlesOH · May 15, 2007#24
Taken from http://en.wikipedia.org/wiki/Throttle_body

In a fuel injection engine, the throttle body is the part of the air intake system that controls the amount of air flowing into the engine, in response to driver input. While the accelerator is often called a "gas pedal", it would be more accurate to describe it as an "air pedal".

The throttle body is usually located between the air filter box and the intake manifold, and usually attached to, or near, the mass airflow sensor.

The largest piece inside the throttle body is the throttle plate, which is a butterfly valve that regulates the airflow.

On many cars, the accelerator pedal motion is communicated through the throttle cable, which activates the throttle linkages, which moves the throttle plate. In cars with electronic throttle control (also known as "drive-by-wire"), an electric motor controls the throttle linkages and the accelerator cable connects not to the throttle body but to a sensor. The Engine Control Unit (ECU) determines the throttle opening.

When the driver presses on the accelerator pedal, the throttle plate opens up, allowing more air into the intake manifold. Either a throttle position sensor or an airflow sensor measures this change and communicates with the ECU. The ECU then increases the amount of fuel being sent to the fuel injectors in order to maintain the desired air-fuel ratio.

Throttle bodies may also contain valves and adjustments to control the minimum airflow during idle. Even in those units that are not "drive-by-wire" there may be a small electric motor that the ECU uses to modify the throttle opening.

Many cars have a single throttle body, however more than one may be used, chained together by linkages, to improve throttle response. At the extreme end, cars such as the BMW M1 have a separate throttle body for each cylinder.

A throttle body is somewhat analogous to the carburetor in a non-injected engine. Carburetors combine the functionality of the throttle body and the fuel injectors into one, that is, to modulate the amount of air flow, and to combine air and gas together. Cars with throttle body injection (called TBI by General Motors and CFI by Ford) locate the fuel injectors in the throttle body, thereby allowing an older engine to be converted from carburetor to fuel injection without altering significantly the engine design.
Its basically like having 4 separate intakes on your car. Crazy stuff.
Black YarisToledo, OH · May 15, 2007#25
Originally Posted by ChinoCharles ↑
Taken from http://en.wikipedia.org/wiki/Throttle_body



Its basically like having 4 separate intakes on your car. Crazy stuff.
Question.... would 4 MAF sensors be needed for the ITB? And you say they have adapted this to a Yaris already?
ChinoCharlesOH · May 15, 2007#26
I'm not sure how the MAF issue is dealt with. I didn't talk to them enough about it to get that far. If anyone is serious about buying it I can give you the e-mail you'll need. They'll know more than I will.
Black YarisToledo, OH · May 15, 2007#27
what were they talkin about cost wise? that will tell me if I will shoot them a line or not
nebulightPA · May 15, 2007#28
Originally Posted by Black Yaris ↑
Question.... would 4 MAF sensors be needed for the ITB? And you say they have adapted this to a Yaris already?
wow....

Originally Posted by Fred2006 ↑
Is that the intake whit the blitz SuperCharge ???
double wow....

You'd use a map sensor instead of maf, and holy hell, how do you expect to supercharge when you'd have an open intake like that?!

I hate to sound rude, but man, you guys need a crash course in cars.
Black YarisToledo, OH · May 15, 2007#29
Originally Posted by nebulight ↑
wow....



double wow....

You'd use a map sensor instead of maf, and holy hell, how do you expect to supercharge when you'd have an open intake like that?!

I hate to sound rude, but man, you guys need a crash course in cars.
what about cars that have MAP's and MAF's?

and if you look closely there is a MAF on the side of the first Throttle body
nebulightPA · May 15, 2007#30
Originally Posted by Black Yaris ↑
what about cars that have MAP's and MAF's?

and if you look closely there is a MAF on the side of the first Throttle body
You'd just use the MAP, and I'm pretty sure that is a MAP sensor on the side of the throttle body.
Black YarisToledo, OH · May 15, 2007#31
Originally Posted by nebulight ↑
You'd just use the MAP, and I'm pretty sure that is a MAP sensor on the side of the throttle body.
That is a Mass Air Flow on the side, how do I know that? Because I know what it looks like on our cars, and that is not the Manifold Air Pressure... I do see wich side of the throttle body it is on, but it is a MAF on the MAP side... then again the whole ITB thing is over my head
esquivaThread starterSouth Cali · May 15, 2007#32
Originally Posted by ChinoCharles ↑
Danstoy makes the ITB kit. It will fit the Yaris with slight modification AFAIK.
only danstoy makes it?...does anyone know any other company?
ChinoCharlesOH · May 15, 2007#33
I can get the mechanical bits of that ITB kit for $1000 a pop with a discount on group buys. The kicker is you have to make the necessary modifications yourself and deal with engine management on top of that. You're probably talking 2 grand when all is said and done tops. That's w/ a standalone, tune, and custom fab included. Not bad for 30-40 reliable HP. Question is will it fit? Second question is will it bolt up? So many questions!
redyarisOrlando, FL · May 15, 2007#34
Originally Posted by kurokoma-kun ↑
nebulight, that is a datsun?
Its a Toyota GT 2000 coupe...only the most coveted Toyota in history.🤘

Datsun only wishes they had created anything at the time that was as cool.
esquivaThread starterSouth Cali · May 15, 2007#35
Originally Posted by ChinoCharles ↑
I can get the mechanical bits of that ITB kit for $1000 a pop with a discount on group buys. The kicker is you have to make the necessary modifications yourself and deal with engine management on top of that. You're probably talking 2 grand when all is said and done tops. That's w/ a standalone, tune, and custom fab included. Not bad for 30-40 reliable HP. Question is will it fit? Second question is will it bolt up? So many questions!
hmmm...lets get something going...im interested in providing the test vehicle to make sure it would work on our cars....thats if we could talk to them about something like that...