Yarisworld Archive

HELP! Gear Oil change on a sedan

16 posts · 12,002 views

CASTREXOriginal postCosta Rica · May 11, 2007#1
I just got the Amsoil 75w-90 gear oil for my manual Sedan.

Never change tranny oil before. Where is the plug located? Is it hard to change?? Should I go to a shop or can i do it my self?


Help!

Replies 15

jmjoneseyNorth Carolina · May 11, 2007#2
bump

ivannaknow as well
CASTREXThread starterCosta Rica · May 12, 2007#3
Never mine. It was just $8 in a shop close to mi house.

Thanks for all the help!!!
blacksanVirginia · May 12, 2007#4
I would have gotten this up earlier, but have been busy. I hope this is easy enough for you to figure out.
Manual Transmission.jpgTrany Fluid level.jpg
GuySmilySacramento, CA, USA · May 13, 2007#5
Here's a picture from underneath an mr2 (mk1), which is the same as on the Yaris:
Picture lost · img.photobucket.com

On our cars we can also fill from on top the transmission, since our 20-year-old transmissions often have stripped/stuck fill bolts. (The shiny hole in the picture)
Picture lost · mr2.phpwerx.net

Be careful because the bolts have very flat heads, so your sockets will have a hard time keeping grip. Some people have ground down the ends of their sockets because the ends of sockets are rounded.
driftoNY/NJ · May 13, 2007#6
Originally Posted by GuySmily ↑

Be careful because the bolts have very flat heads, so your sockets will have a hard time keeping grip. Some people have ground down the ends of their sockets because the ends of sockets are rounded.
buy some metric snap-on sockets, youll be fine 👍 worth every penny
blacksanVirginia · May 13, 2007#7
Originally Posted by GuySmily ↑
On our cars we can also fill from on top the transmission, since our 20-year-old transmissions often have stripped/stuck fill bolts.Be careful because the bolts have very flat heads, so your sockets will have a hard time keeping grip. Some people have ground down the ends of their sockets because the ends of sockets are rounded.
All the more reason to pull the plugs and lightly coat them with never seize. The different metals (drain plug vs tranny case) will create a problem after several years.
blacksanVirginia · May 13, 2007#8
Originally Posted by drifto ↑
buy some metric snap-on sockets, youll be fine 👍 worth every penny
Several years ago I picked up a socket set (Met Wrench) that grips the flats vs edges on metric and standard that work real dam good! I have a little bit of everything and do like every thing about Snap On, but the price.
CASTREXThread starterCosta Rica · May 13, 2007#9
Thanks for the help.

BTW, changing gears feels so much smoother after the change!
blacksanVirginia · May 13, 2007#10
Originally Posted by CASTREX ↑
Thanks for the help.

BTW, changing gears feels so much smoother after the change!
How many miles on the previous lube? Did you go with synthetic? Did you consider a magnetic drain plug?
CASTREXThread starterCosta Rica · May 13, 2007#11
My car has 5K miles. This is my second change, I did the first one at 1K miles with regular oil. Went with Amsoil full syntetic. No magnetic plug. 0w-30 for the engine and 75w-90 for the tranny. You can feel de difference right away!
blacksanVirginia · May 13, 2007#12
Originally Posted by CASTREX ↑
My car has 5K miles. Went with Amsoil full syntetic. 0w-30 for the engine and 75w-90 for the tranny. You can feel de difference right away!
Yes, yes, I am also a firm believer in Amsoil!!! The only thing I would have done diffrently is gone with 5W-30 in your part of the world. I can't imagine it gets cold enough to take advantage of the 0W-30. What brand of filter do you use?
CASTREXThread starterCosta Rica · May 13, 2007#13
Yep is hot around here. maybe will change to 5w-30 in 6 or 7 months when I change it again.
Used a WIX filter.
blacksanVirginia · May 13, 2007#14
Originally Posted by CASTREX ↑
Yep is hot around here. maybe will change to 5w-30 in 6 or 7 months when I change it again.
Used a WIX filter.
I also use the Wix. As a matter of fact the NAPA Gold series filter is made by Wix and a tad bit cheaper in my area. How many miles do you plan on running before changing oil again?
CASTREXThread starterCosta Rica · May 13, 2007#15
I'm thinking 10K miles per change. I know I know that I can keep it longer... but change it at 10k will help me sleep better.
blacksanVirginia · May 13, 2007#16
Originally Posted by CASTREX ↑
I'm thinking 10K miles per change. I know I know that I can keep it longer... but change it at 10k will help me sleep better.
My family used Amsoil in heavy equipment for years. We just pulled filters and toped off. When that maintenance was performed we also sent of oil sample. With that method oil was only changed once a year.

I really do believe that a new (quality) filter twice a year along with top off your oil you could easily drive your car the average 15K each year with only one oil change. Now, if you wanted to get real fancy and do a double filter setup once each year for filter & oil would be no big deal.